制动电阻器多学科设计优化

为了确保机车、动车制动电阻器整体性能提高,以某型号特种内燃动车制动电阻器传热性能、经济性能、质量以及抗热冲击性能为目标函数建立多学科设计优化模型,并充分考虑各学科之间的耦合效应,采用自适应混沌优化算法对多学科设计优化模型进行求解。多学科设计优化结果表明,该制动电阻器传热性能增加11.51%,设计成本下降7.05%,质量减少7.21%,抗热冲击性能增加15.50%,整体性能提高9.97%。优化前后特种内燃动车制动电阻器的安全温度对比实验表明,制动电阻片的安全温度由优化前的500℃提高到优化后的550℃。     

Comparative analysis of vehicle brake data in the ministry of transport test on the roller brake tester and on flat ground

This study performs a comparison between what occurs when braking on a Ministry of Transport (MOT) brake tester and on flat ground. The tire pressure is changed, but the other parameters remain constant. The results from this research and from the in-depth comparative study conducted by the mechanical engineering staff in the mechanical laboratory at the Miguel Hernández University in Elche have led to the following main conclusions: By varying the tire pressure, false results can be obtained with the MOT brake tester, which means that, if the tires are inflated at a low pressure but the brakes are in good condition, the vehicle will not pass the MOT. Conversely, if the brakes are in poor condition but the tire pressure is higher than what is recommended by the manufacturer, a false pass is produced. This article shows that the MOT brake testing equipment is often wrong and inexact, and the data and graphs presented prove that the tire pressure is a determining factor when assessing the condition of brakes.     

Light rail transit in Canada

This paper describes current light rail transit planning and operation in Canada's major cities and smaller communities. There are ten urban areas in Canada with 250,000 or more people. Two of these have light rail systems in operation, three have lines under construction and nine others are planning LRT systems.     

Travel intensity in a city with a barrier

An analytical study is made of the determination of the travel intensity at an arbitrary point of a city with a straight line barrier. For a given origin and destination a trip is made by the shortest path not crossing the barrier or the city perimeter. The joint trip end distribution is arbitrary except for a continuity assumption.     

Stability Criteria for Automobile-Trailer Combinations

The characteristic equation for a simple automobile-trailer combination is analyzed, revealing the parameter groups which are important in determining the stability characteristics. Application of Routh's method results in separate criteria for oscillatory and non-oscillatory criteria which can be evaluated algebraically, and which can also be displayed graphically showing a region of stability on a two-dimensional plot. The stability region is bounded by limits of oscillatory and non-oscillatory stability, and the evaluation of a specific case corresponds to the location of a point relative to the boundaries.     

Design Synthesis of a Vehicle Suspension System Using Multi-Parameter Qptimization

The transmission of road-generated vibrations into a vehicle body is treated as a source-path-receiver problem. The suspension system acts as the path, and improved isolation can be achieved by having a single compliant bushing at the connecting point of the shock absorber to the body with none at the other end. A mathematical model is derived for such a system which would enable detailed parameter investigation to be undertaken using the gradient method of optimization. An expression for the absolute displacement transmissibility of the body is derived and the optimization procedure is applied in order to evaluate the optimum values of the non-dimensional variables involved. This minimizes the maximum motion transmitted to the body from the road surface over a broad frequency range. Design data which are presented non-dimensionally for parameter variations show the influence of three variables: the bushing stiffness, the resonant frequency ratio and the damping coefficient upon the transmissibility.     

IN VITRO GLYCATION OF HEMOGLOBIN (HB):CHOOSING THE APPROPRIATE MODEL

ＩＮＶＩＴＲＯＧＬＹＣＡＴＩＯＮＯＦＨＥＭＯＧＬＯＢＩＮ（ＨＢ）：ＣＨＯＯＳＩＮＧＴＨＥＡＰＰＲＯＰＲＩＡＴＥＭＯＤＥＬＦａｎｇＺｈｉｙｕ；Ｒ．Ｒ．Ｌｉｔｔｌｅ，Ｈ．Ｍ．Ｗｉｅｄｍｅｙｅｒ，Ｄ．Ｅ．Ｇｏｌｄｓｔｅｉｎ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｉｌ...     

Environmental changes in the western Black Sea related to anthropogenic and natural conditions

The Black Sea northwestern shelf (NWS) ecosystem has been subjected to the strongest anthropogenic pressure of the entire Black Sea as about 80% of the freshwater runoff is discharged there.This paper presents a review of the global environmental changes related mainly to increased eutrophication in the western Black Sea basin.A case study (CoMSBlack 92a cruise) attempts to highlight the interaction of some natural and anthropogenic factors responsible for specific chemical and biological features in the western Black Sea environment. The significance of processes located near the Danube river mouth, which, due to their relatively small space scale, have not been recognized before, is clarified. Hydrological processess of specific importance to the distribution and transformation of antropogenic inputs are river plume dynamics, coastal upwelling and mixing and downwelling over the shelf break and slope in this part of the basin. A layer of low hydrological variability (“conservative layer”) appears to be a natural feature of the area, hypothesized to precondition specific biological and chemical processes there.The results suggest that the interplay between the Danube anthropogenic nutrient load with the natural hydrological fronts and gradients provides opportunities for enhanced biological activity thus contributing to the global environmental changes in the Black Sea NWS.     

Characteristics of Guided-Steering Railway Trucks

The dynamic characteristics of guided-steering railway trucks are described both in a general sense and in terms of a specific design. Stability margins and curving performance have been predicted and are compared for both conventional and steered vehicles. It is shown that guided-steering trucks exhibit modes of instability which, although surmountable by proper design, are not found in conventional trucks. In particular, a low conicity, divergent, leading truck instability is described together with a companion high conicity, divergent trailing truck instability. Curving and dynamic performance for steered vehicles is shown to have the potential of being far superior to that of comparable conventional vehicles. Factors influencing the design of steered rail vehicles are presented and discussed.