小郭巨渔港工程防波堤平面布置方案

波浪是渔港建设中最重要的水动力因素,由于外海风浪作用强烈,影响港内渔船泊稳,需修建防波堤挡潮抗浪。从波浪角度研究防波堤平面布置,首先分析了舟山市六横岛小郭巨渔港工程的建设条件,确定防浪掩护控制标准,并提出防波堤直线形、折线形布置的8个平面布置方案。以满足渔船有效泊稳面积为准,采用MIKE21 BW模块计算在50 a一遇波浪与水位组合条件下堤后波高分布及防浪掩护效果,对8个方案进行研究,基于其中相对较优方案,进行了2个方案的优化。最终确定某渔港防波堤平面布置最优方案为:防波堤总长350 m、折堤夹角132°、直线段长122 m、折线段长228 m。     

基于粒子群算法的水下多元线阵阵形有源校正方法

针对存在阵元位置误差的水下多元线阵,提出一种基于粒子群优化算法的远场有源阵形校正方法.该方法选用2个辅助源分时工作方式,利用无条件最大似然方位估计算法构建目标函数,并通过粒子群算法对阵元位置进行寻优.利用该方法对均匀线阵进行性能仿真实验.结果表明:该方法稳健性好、校正精度高,具有一定的应用前景.     

船用电器柜抗冲击设计研究

为增强船内部电器柜的抗冲击性能,采用有限元法对船内不同安装型式的电器柜结构进行了模态和抗冲击性能仿真分析,通过对比分析得出了使用撑杆加固型式安装的电器柜能显著提高船内电器柜的抗冲击性能的结论,并确定了电器柜抗冲击优化设计方案。     

Generalized Maximum Benefit Multiple Chinese Postman Problem

This research is focused on a generalization on the Max Benefit Chinese Postman Problem and the multiple vehicle variant of the Chinese Postman Problem. We call this generalization, the Generalized Maximum Benefit k-Chinese Postman Problem (GB k-CPP). We present a novel Mixed Integer Programming (MIP) formulation for the GB k-CPP. Four different cases of the model are discussed. The first case, performs arc-routing with profits and assumes that the origin and destination for each vehicle is the same for each cycle and is given by the user. The next case relaxes the assumption that the origin and destination for each vehicle should be the same and allows the users to select possible origins/destinations for vehicles. Case three gets the origin for each vehicle as input and produces a solution based on finding the best destination for each vehicle. The last case, that is very general, allows the optimization model to select possibly different locations for vehicle origin and destination, during each cycle. The different cases are applied to a security patrolling case conducted on the network of University of Maryland at College Park campus and the results are compared.     

船舶运动姿态测量系统设计与实现

为了获取海上航行船舶及自航模试验中船模的姿态参数,设计一种基于MEMS(微机电系统)技术的波高倾斜一体化传感器的船舶运动姿态测量系统.此系统通过MEMS波高传感器对船舶升沉信息进行采集,利用倾角传感器对船舶的纵摇和横摇姿态信息进行采集,采集到的信息经多路A/D转换后送入单片机进行处理,实时得出船舶运动的升沉、纵摇及横摇变化.经处理后的三组数据由船舶运动姿态测量系统通过RS-485串口送到数据接收处理机存储、分析并实时显示船舶运动的姿态变化曲线,该数据接收处理软件采用VC++编写.经过大量试验及海上测试,该系统性能稳定,测量精度高,具有较大的实用价值.     

Optimal joint distance and time toll for cordon-based congestion pricing

This paper addresses the optimal toll design problem for the cordon-based congestion pricing scheme, where both a time-toll and a nonlinear distance-toll (i.e., joint distance and time toll) are levied for each network user’s trip in a pricing cordon. The users’ route choice behaviour is assumed to follow the Logit-based stochastic user equilibrium (SUE). We first propose a link-based convex programming model for the Logit-based SUE problem with a joint distance and time toll pattern. A mathematical program with equilibrium constraints (MPEC) is developed to formulate the optimal joint distance and time toll design problem. The developed MPEC model is equivalently transformed into a semi-infinite programming (SIP) model. A global optimization method named Incremental Constraint Method (ICM) is designed for solving the SIP model. Finally, two numerical examples are used to assess the proposed methodology.     

船舶通信英语口语与听力课程标准

结合船舶驾驶员的岗位职责,依照现代职业教育理论和成果,设计了船舶通信英语口语与听力课程标准.对该课程的课程概述、培养目标、与前后课程的联系、教学内容与学时分配、学习资源、教师要求、学习场地与设施要求、考核方式与标准、学习情境设计进行了设计和描述,将船舶通信中典型工作任务转化为学习型任务.     

The generators of paratransit trips by persons with disabilities

Identifying the generators of paratransit trips by persons with disabilities is important to comprehend the current demand patterns and forecast future demand. Only a handful of studies have been conducted so far to identify the generators of paratransit trips and most focused on the home end of the trips. Given some of the inconsistencies in past studies and the scarcity of studies on the generators of trips away from home, this study attempts to identify the generators of paratransit trips beginning and ending at clients’ homes and away from home. It uses an extremely large dataset consisting of 1.91 million trips made by NJ TRANSIT’s Access Link clients, socioeconomic data from the American Community Survey, employment data from the Longitudinal Employer-Household Dynamics, and establishment data from Dun and Bradstreet. The analytical methods include an ordinary least squares model (OLS) and several spatial generalized linear mixed models (GLMM) to identify the characteristics of census block groups associated with Access Link trip generation at home and away from home, Geographic Information System (GIS) analysis to identify the types of establishments located in the immediate vicinity of drop-offs, and a multinomial logit model (MNL) to examine the relationship between the characteristics of the establishments in the vicinity of drop-offs and the characteristics of the dropped-off clients. Together, the various analyses provide useful insights about paratransit trip generators at the macro and micro levels. Some implications of the findings are discussed.     

极高地应力软岩隧道超前导洞应力释放及多层支护变形控制技术

为了解决极高地应力软岩隧道大变形控制难题,以兰渝铁路木寨岭隧道岭脊核心段施工为例,通过现场试验和数据分析,得到如下主要结论:1)提出了"先放后抗,抗放结合,锚固加强"的变形控制理念;2)得出了该隧道岭脊核心段"超前导洞应力释放+圆形4层支护结构+径向注浆+长锚杆+长锚索"综合变形控制方案;3)超前导洞应力释放效果明显,正洞累计变形减小幅度约为34%;4)得到了圆形多层支护结构变形规律;5)累计变形均控制在设计预留变形量内,保证了该隧道岭脊核心段大变形控制效果。     

我国商业银行信息化建设研究综述

我国商业银行信息化建设已走过近20年的路程,在取得巨大业绩的同时也存在若干不足之处．文章在总结我国商业银行信息化建设经验的基础上,对其信息化建设的现状进行了深入的分析,同时指出了我国商业银行信息化建设的总体规划方向,以期大幅度提高我国商业银行的信息化建设绩效。