桩基建模方法对自升式钻井平台动力响应的影响

随着海洋油气开采作业水深的不断增加,海洋平台固有频率随之降低,易与相同频率成分的波浪产生共振,因此对平台动力响应特性研究是非常有必要的,而桩基模型在平台动力响应分析中发挥着关键作用。以某400英尺自升式钻井平台研究对象,基于等效建模的思想,分别建立了固支桩基、铰接桩基、线性弹簧桩基及非线性弹簧桩基四种有限元模型,并对其进行静力分析、模态分析及瞬态动力学分析,通过对比得到的振动频率、动力放大因子及波流惯性力,得出弹簧桩基模型在平台动力响应分析中的有效性及合理性结论。     

港口岸线环境补偿人工沙滩工程理论与实践

依托港口岸线建设环境补偿人工沙滩工程是践行国家生态文明建设战略,实现港、城一体化发展的有益举措。针对人工沙滩建设中的理论和关键技术问题,通过自主研发,取得以下主要创新性成果:1)发展了沙、泥并存下沙滩动力地貌学基础理论;2)形成先进的数值、物理模拟技术;3)提出适用于各种复杂泥沙环境下的人工沙滩设计原则;4)研发了人工沙滩防侵蚀、防泥化的整治与养护措施。研究成果已成功应用于不同复杂泥沙环境下的实际沙滩工程中,实现了良好的经济、社会和生态环境效益,具有广阔的推广应用前景。     

游艇码头定位桩内力分析

定位桩是游艇码头的一种重要锚碇形式,现行规范对游艇码头风荷载、波浪荷载等规定存在不详尽之处,为完善游艇码头定位桩的计算分析,采用ANSYS有限元软件对游艇码头在风荷载和波浪荷载作用下的受力情况进行分析,对游艇码头定位桩计算提出合理建议,建议游艇码头计算采用整体建模,风荷载的遮挡效应应考虑船型、受风高度、船舶间距等因素。     

Multi-criteria optimization of traffic signals: Mobility,safety, and environment

Two-dimensional multi-objective optimizations have been used for decades for the problems in traffic engineering although only few times so far in the optimization of signal timings. While the other engineering and science disciplines have utilized visualization of 3-dimensional Pareto fronts in the optimization studies, we have not seen many of those concepts applied to traffic signal optimization problems. To bridge the gap in the existing knowledge this study presents a methodology where 3-dimensional Pareto Fronts of signal timings, which are expressed through mobility, (surrogate) safety, and environmental factors, are optimized by use of an evolutionary algorithm. The study uses a segment of 5 signalized intersections in West Valley City, Utah, to test signal timings which provide a balance between mobility, safety and environment. In addition, a set of previous developed signal timing scenarios, including some of the Connected Vehicle technologies such as GLOSA, were conducted to evaluate the quality of the 3-dimensional Pareto front solutions. The results show success of 3-dimensinal Pareto fronts moving towards optimality. The resulting signal timing plans do not show large differences between themselves but all improve on the signal timings from the field, significantly. The commonly used optimization of standard single-objective functions shows robust solutions. The new set of Connected Vehicle technologies also shows promising benefits, especially in the area of reducing inter-vehicular friction. The resulting timing plans from two optimization sets (constrained and unconstrained) show that environmental and safe signal timings coincide but somewhat contradict mobility. Further research is needed to apply similar concepts on a variety of networks and traffic conditions before generalizing findings.     

基于BIM设计的道岔设备建模方法研究

为了解决站场BIM设计中道岔与岔线建模繁琐、定位捕捉困难等问题,基于最新的OpenRail软件环境,对MicroStation直接建模和道岔设备抽象化线性建模两种思路进行比较分析。经研究,线性建模方法更适合站场BIM设计。针对线性建模手段,将道岔的主要设备及尺寸信息转化为标准化道岔库元素和标记,然后按抽象化的道岔元素及标记信息进行xml文件编程,得到了较好的应用体验。     

Environmental and transport effects of warehouse relocationing: evidence from Norway

Reducing traffic volumes and CO2-emissions from freight transport has proven difficult in many countries. Although the increasing suburbanization of warehouses is seen as a relevant land use trend, comprehensive analyses of their impact remain scarce. This study uses real data in modeling transport, costs, environmental and modal effects from warehouse relocations around Oslo and Trondheim (Norway). Results indicate that for Oslo, traffic performance (ton-km), CO2-emissions, and transport costs increase following warehouse suburbanization. For Trondheim, transport performance and CO2-emissions increase less, while transport costs decrease marginally. We conclude that specific case characteristics (geography and trade patterns) are important in determining the strength and direction of effects, and expect that common concomitant developments (warehouse centralization and consolidation) would lead to more pronounced results. Our findings confirm some, but challenge other, findings from the relatively scarcely literature available. Finally, the study's more general insights and observations can help advance similar analyses beyond Norway.     

Capturing correlation with a mixed recursive logit model for activity-travel scheduling

Representing activity-travel scheduling decisions as path choices in a time–space network is an emerging approach in the literature. In this paper, we model choices of activity, location, timing and transport mode using such an approach and seek to estimate utility parameters of recursive logit models. Relaxing the independence from irrelevant alternatives (IIA) property of the logit model in this setting raises a number of challenges. First, overlap in the network may not fully characterize perceptual correlation between paths, due to their interpretation as activity schedules. Second, the large number of states that are needed to represent all possible locations, times and activity combinations imposes major computational challenges to estimate the model. We combine recent methodological developments to build on previous work by Blom Västberg et al. (2016) and allow to model complex and realistic correlation patterns in this type of network. We use sampled choices sets in order to estimate a mixed recursive logit model in reasonable time for large-scale, dense time-space networks. Importantly, the model retains the advantage of fast predictions without sampling choice sets. In addition to estimation results, we present an extensive empirical analysis which highlights the different substitution patterns when the IIA property is relaxed, and a cross-validation study which confirms improved out-of-sample fit.     

基于OpenStreetMap的城市自行车网建模与多判据路径规划

自行车交通是一种健康、绿色、环保的交通出行方式,合理地规划自行车出行路线对于满足骑行者多元化出行需求、构建安全规范的城市交通出行环境具有重要的意义.在对真实骑行者路径选择行为深入分析的基础上,提出了基于Open Street Map的城市自行车网络的构建方法及基于其上的多判据自行车路径优化的数学模型,并给出了求解该模型的一种基于聚类的最优多判据路径规划方法.实验仿真结果表明,该模型及方法能够生成满足骑行者真实需求的多判据路线方案.     

基于时延特性建模的多断面短时交通流预测

针对现有交通流预测方法未充分考虑多断面车流演变规律，提出基于时延特性建模的时空相关性计算方法. 该方法采用对不同断面、不同时刻交通流的分布相似性度量，对输入的车辆到达数据序列进行切割构建时空相似度矩阵，得到相邻断面之间的时延参数. 基于时延特性建模，将多断面之间的流量信息进行融合，使用长短时记忆(LSTM)网络进行流量预测. 通过对实际路段数据的预测和结果分析，验证所提方法的有效性和实用性.     

Simulating the air quality impacts of traffic calming schemes in a dense urban neighborhood

In this study, the effects of isolated traffic calming measures and area-wide calming schemes on air quality in a dense neighborhood were estimated using a combination of microscopic traffic simulation, emission, and dispersion modeling. Results indicated that traffic calming measures did not have as large an effect on nitrogen dioxide (NO₂) concentrations as the effect observed on nitrogen oxide (NO_x) emissions. Changes in emissions resulted in highly disproportional changes in pollutant levels due to daily meteorological conditions, road geometry and orientation with respect to the wind. Average NO₂ levels increased between 0.1% and 10% with respect to the base-case while changes in NO_x emissions varied between 5% and 160%. Moreover, higher wind speeds decreased NO₂ concentrations on both sides of the roadway. Among the traffic calming measures, speed bumps produced the highest increases in NO₂ levels.