双层开孔斜挡板透空式防波堤消浪性能研究

针对一种新型双层开孔斜挡板透空式防波堤消浪性能问题,研究挡板开孔率和挡板倾斜角度对防波堤消浪性能的影响。采用物理模型试验方法,得出其反射和透射系数、波能分布和堤后波幅频谱特征结果。结果表明,斜挡板开孔率越大,防波堤透射系数也越大,但在试验范围内,透射系数均小于0. 5;该类型防波堤对波浪有较好的消能性,对较长周期波以反射为主,较短周期波以消浪室消能为主,整体透射系数较短周期波略大;防波堤设计斜挡板比平挡板透射系数小,具有更好的消浪性能,最小透浪仅为后者的39%。     

导电密封胶对不锈钢车体电阻点焊焊接性能影响研究

分析了电阻点焊原理,对相同的点焊搭接方式,分别采用3种工况进行焊接试验。3种工况分别采用相同焊接参数对搭接接触面涂导电密封胶和不涂导电密封胶的试件进行焊接;优化焊接参数后,对搭接接触面涂导电密封胶的试验件进行焊接。对3种工况下完成的焊接试件进行拉伸力检测试验、金相熔核尺寸检测和缺陷检测试验,对熔核直径、拉伸力、熔核内部缺陷的试验结果进行分析。试验结果表明:导电密封胶对电阻点焊的焊接性能存在影响;通过适当优化焊接参数,可以提高涂导电密封胶试件的焊接性能,焊接质量能够满足产品焊接要求。     

斜拉索-磁流变阻尼器多性能约束下的减振控制算法

提出一种极点和方差指标约束下的斜拉索-磁流变减振控制算法。基于Halmiton原理与切比雪夫级数求解方法建立斜拉索-阻尼器减振控制系统状态空间方程。以极点表达减振控制快速性和稳定性约束,以方差表达小振幅和振速约束,基于凸优化理论,给出满足相容快速性、稳定性、小振幅以及振速指标约束下的磁流变半主动减振控制算法。最后,以某斜拉桥C20号斜拉索为例进行仿真验证。结果表明,给出的减振控制算法能保证斜拉索在随机外界激励下的快速性稳定性,且有效抑制拉索的振幅,减振效果良好。     

电子车辆识别技术的性能、安全性和成本分析及应用

电子车辆识别(EVI)是利用电子信号对车辆进行自动识别和监测的技术.随着RFID技术的不断发展,EVI应用的领域和范围不断扩大,这对EVI的性能、安全性和成本提出了更高的要求.     

A Delphi analysis on green performance evaluation indices for ports in China

This study identified a set of applicable and practical green performance evaluation indices for Chinese ports using the Delphi technique. The research was conducted by targeting three representative Chinese ports in Eastern China: the Shanghai Port, Ningbo Port, and Qingdao Port. An effective expert panel was structured with direct stakeholders related to green performance, which was based on a sufficient consideration of the unique and the special decision-making system for Chinese ports. Twenty-one green performance indices in six dimensions (i.e. liquid pollution management, air pollution management, noise control, low carbon regulations and energy savings, marine biology preservation, and organization and management) were eventually identified through three rounds of iterations. The identified green performance indices for Chinese ports are highly consistent with the Chinese Government’s environmental policies. Compared with European ports, the green port performance indicators in China are not as comprehensive. The indicators that are strictly consistent with national macro policies and the factors that are more easily seen, heard, and felt were perceived to be more important. From an academic perspective, this study offers a new approach for system establishment and green practice criteria exploration and thus provides a significant basis for further green port studies.     

基于气液两相流解析模型的水冲压发动机推进特性分析

给出了喷管中气液两相流动等温正压模型的解析解。基于该解析模型以及水冲压发动机内流道几何参数,迭代求解了发动机在一系列工况下的推进特性。研究表明,水冲压发动机的推力、效率、比冲随着气相质量流量以及航速的共同提高而提高,单单增加航速或单单增加气体质量流率,都会使得比冲和效率先增后减。单单增加气体质量流率,水流流量减小,推力增加,但是耗气量显著增加。单单增加航速,水的流量增加,推力将先增后减。     

Estimation of delay variability at signalized intersections for urban arterial performance evaluation

Urban arterial performance evaluation has been broadly studied, with the major focus on average travel time estimation. However, in view of the stochastic nature of interrupted flow, the ability to capture the characteristics of travel time variability has become a critical step in determining arterial level of service (LOS). This article first presents a stochastic approach that integrates classic cumulative curves and probability theories in order to investigate delay variability at signalized intersections, as a dominant part of the link travel time variability. This serves as a basis for arterial travel time estimation, which can be obtained through a convolution of individual link travel time distributions. The proposed approach is then applied in the estimation of travel time along one arterial in Shanghai, China, with abundant automatic vehicle identification (AVI) data sources. The travel time variability is evaluated thoroughly at 30-min intervals, with promising results achieved in comparison to the field measurements. In addition, the estimated travel time distributions are utilized to illustrate the probability of multiple LOS ranges, namely, reliability LOS. The results provide insights into how we might achieve a more reliable and informative understanding of arterial performance.     

Effectiveness of travel time reliability indicators in the light of the assessment of dynamic managed lane strategy

ABSTRACT

The aim of traffic management is to ensure a high quality of service for a maximum number of users by decreasing congestion and increasing safety. Uncertainty of travel times decreases the quality of service and leads end users to modify their plans regardless of the average travel time. Indicators describing travel time reliability are being developed and should be used in the future both for the optimization and for the assessment of active traffic management operations. This article discusses the efficiency of certain reliability indicators in an ex-post assessment of a traffic management strategy. Ex-post assessment is based on an observational before–after study. As some factors other than the studied management strategy may intervene between the two periods, and as most reliability indicators require knowledge of the full travel time distribution and not only its average, a methodology is developed for the identification of the impact of these exogenous factors on the whole distribution. Many reliability indicators are split into different parts allowing the identification of the part due to the management strategy impact. The methodology is tested numerically on a managed lane operation consisting of Hard Shoulder Running (HSR) at rush hour on a section of a French motorway. The variation of some reliability indicators appears misleading, whereas the splitting of the indicators increases our understanding of the strategy and highlights its impact. The paper gives the reliability assessment of the HSR field test and discusses different reliability indicators to identify their potential performances and shortcomings.     

水泥粉煤灰碎石基层材料路用性能的研究

对水泥粉煤灰碎石基层材料的各项路用性能进行了试验研究.研究表明,水泥粉煤灰稳定碎石兼具水泥和二灰稳定材料的优点,将其作为路面基层材料是可行的.     

二灰冷再生沥青路面基层路用性能研究

通过对原路材料进行材料组成分析,并且通过对几种不同配合比的冷再生材料的无侧限抗压强度、劈裂强度、冲刷性能的初步研究,对二灰冷再生材料的性能做出了初步评价.二灰冷再生材料基本可以满足规范对沥青路面的半刚性基层的要求.