基于期权理论的铁路货运定价模型

为了规避铁路运输企业和协议客户在市场价格波动情况下所面临的风险,在铁路货运的定价过程中引入期权的概念,利用二叉树模型为期权定价,在此基础上构建了基于铁路运输企业和协议客户收益最大条件下的铁路货运定价模型。研究结果表明:通过铁路运输企业和协议客户的最优定价决策可以求得铁路运输企业制定的协议价格和协议客户的期权购买量;协议价格与现货市场价格正相关,与铁路运输企业的长期准备成本正相关、短期准备成本负相关;随着期权价格和期权执行价格的升高,协议客户在契约市场所购买的期权数量逐渐减少。     

AMT换挡品质的研究

电控机械式自动变速器（AMT）具有传动效率高、结构紧凑及工作可靠等优点。介绍了AMT换挡品质的定义及其影响因素，分析了几种影响因素之间的内在关系，并在此理论基础上寻求一种可获得最佳AMT换挡品质的方法。AMT按照其对发动机控制方式的不同，可分为柔性控制和刚性控制结构。     

Introduction: Habitual travel choice

In this introduction to the special issue on habitual travel choice, we provide a brief account of the role of habit in travel behaviour, discuss more generally what habitual choice is, and briefly review the issues addressed in the solicited papers. These issues include how habitual travel behaviour should be measured, how to model the learning process that makes travel choice habitual, and how to break and replace car-use habits.     

Bus Priority Using pre-signals

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling.     

大连新建地铁对公交出行选择的影响

为了分析城市新建地铁项目对居民公共交通出行的影响，改善公交服务水平，提高公共交 通的分担率，针对大连市新建地铁线路展开研究。以大连市地铁1 号线沿线站点作为研究区域， 采用SP （Stated Preference） 调查方法，收集了300 名地铁沿线居民对常规公交以及新建地铁两种 出行方式的选择数据。通过建立二项Logit 模型，分析出行成本、换乘时间等选择方案特性变 量，出行特性变量以及出行者特性变量对于居民出行方式选择行为的影响，并计算弹性值及模型 精度。结果表明，通过调整出行成本及换乘时间可有效提高地铁分担率。由此提出相关政策建 议：对于出行成本，可从出行者年龄及出行次数两方面制定不同的优惠政策；对于换乘时间，可 从提高可达性、完善购票系统以及调整发班频率三方面进行改善。     

Risk assessment framework for exposure of cargo and ports to natural hazards and climate extremes

There is an increase in risks and catastrophic losses in maritime transport including ports and cargo. Significant losses have been associated with large scale natural hazards, such as earthquakes, tsunami, cyclones, and other extreme weather events. This paper identifies the main gaps in understanding maritime risks in transportation research. The gaps are attributed to insufficient empirical work available from the maritime transport and logistics research community to guide multi-risk and natural hazards impact assessment on seaport and cargo. In addition, disaster studies communities have barely made adequate efforts to understand and assess port and cargo risks arising from multi-hazards and disaster events. This paper examines existing conceptual frameworks concerning exposure and risk assessments of natural catastrophe’s impacts. Furthermore, the paper identifies trends and gaps in risk assessment frameworks in the field of disaster studies that can be beneficial for maritime risk research. The authors propose a new risk assessment framework that can guide future research and multi-hazard risk assessment processes at different scales of maritime risks.     

Using GPS-data to determine optimum electric vehicle ranges: A Michigan case study

Fuel-switching personal transportation from gasoline to electricity offers many advantages, including lower noise, zero local air pollution, and petroleum-independence. But alleviations of greenhouse gas (GHG) emissions are more nuanced, due to many factors, including the car’s battery range. We use GPS-based trip data to determine use type-specific, GHG-optimized ranges. The dataset comprises 412 cars and 384,869 individual trips in Ann Arbor, Michigan, USA. We use previously developed algorithms to determine driver types, such as using the car to commute or not. Calibrating an existing life cycle GHG model to a forecast, low-carbon grid for Ann Arbor, we find that the optimum range varies not only with the drive train architecture (plugin-hybrid versus battery-only) and charging technology (fast versus slow) but also with the driver type. Across the 108 scenarios we investigated, the range that yields lowest GHG varies from 65 km (55+ year old drivers, ultrafast charging, plugin-hybrid) to 158 km (16–34 year old drivers, overnight charging, battery-only). The optimum GHG reduction that electric cars offer – here conservatively measured versus gasoline-only hybrid cars – is fairly stable, between 29% (16–34 year old drivers, overnight charging, battery-only) and 46% (commuters, ultrafast charging, plugin-hybrid). The electrification of total distances is between 66% and 86%. However, if cars do not have the optimum range, these metrics drop substantially. We conclude that matching the range to drivers’ typical trip distances, charging technology, and drivetrain is a crucial pre-requisite for electric vehicles to achieve their highest potential to reduce GHG emissions in personal transportation.     

Environmental impacts of public transport systems using real-time control method

Public Transport (PT) systems rely more and more on online information extracted from both operator’s intelligent equipment and user’s smartphone applications. This allows for a better fit between supply and demand of the multimodal PT system, especially through the use of PT real-time control actions/tactics. In doing so there is also an opportunity to consider environmental-related issues to approach energy saving and reduced pollution. This study investigates and analyses the benefits of using real-time PT operational tactics in reducing the undesirable environmental impacts. A tactic-based control (TBC) optimization model is used to minimize total passenger travel time and maximize direct transfers (without waiting). The model consists of a control policy built upon a combination of three tactics: holding, skip-stops, and boarding limit. The environmental-related measure is the global warming potential (GWP) using the life cycle assessment technique. The methodology developed is applied to a real life case study in Auckland, New Zealand. Results show that TBC could reduce the GWP by means of reduction of total passenger travel times and vehicle travel cycle time. That is, the TBC model results in a 5.6% reduction in total GWP per day compared with an existing no-tactic scenario. This study supports the use of real-time control actions to maintain a reliable PT service, reducing greenhouse gas emissions and subsequently moving towards greener PT systems.     

The desulphurisation of shipping: Past,present and the future under a global cap

As from January 2020, the International Maritime Organization (IMO) is implementing a global 0.5% limit on the sulphur content of fuel, commonly known as the global sulphur cap. This limit is the latest policy in the efforts to reduce sulphur emissions from shipping, following the designation of emission control areas (ECAs) and other regional regulations. In this paper, a literature review is conducted of academic studies that have dealt with issues relating to the reduction of maritime sulphur emissions. Various recurring research themes are identified, spanning the areas of operations research, maritime economics and transport policy. The effects and implications of available compliance options are then analyzed from the perspectives of ship operators, shippers and consumers. Using lessons learned from the enforcement of ECA regulations, this is followed by an appraisal of various potential issues related to the enforcement of these new global regulations. It is found that a homogeneous enforcement regime is required to ensure a level playing field amongst ship operators and that the global sulphur cap may lead to serious market distortion, due to the potential short term rise of fuel prices. The paper concludes with a set of recommendations for future research on sulphur emissions from shipping in the aftermath of the global cap and, looking forward, to its relationship to the IMO strategy on the reduction of greenhouse gas (GHG) shipping emissions.     

Solving the gate assignment problem through the Fuzzy Bee Colony Optimization

In the field of Swarm Intelligence, the Bee Colony Optimization (BCO) has proven to be capable of solving high-level combinatorial problems, like the Flight-Gate Assignment Problem (FGAP), with fast convergence performances. However, given that the FGAP can be often affected by uncertainty or approximation in data, in this paper we develop a new metaheuristic algorithm, based on the Fuzzy Bee Colony Optimization (FBCO), which integrates the concepts of BCO with a Fuzzy Inference System. The proposed method assigns, through the multicriteria analysis, airport gates to scheduled flights based on both passengers’ total walking distance and use of remote gates, to find an optimal flight-to-gate assignment for a given schedule. Comparison of the results with the schedules of real airports has allowed us to show the characteristics of the proposed concepts and, at the same time, it stressed the effectiveness of the proposed method.