内燃机活塞-缸套-活塞环系统工作状态的识别方法

提出了一种基于证据理论方法的内燃机活塞—缸套—活塞环系统工作状态的识别方法。通过搭建试验台架,从实车试验中获取曲轴箱压力信号和机身振动加速度信号;提取试验特征值,组建模型样本和试验样本,并运用证据理论信息融合方法对内燃机的工作状态进行识别。研究结果表明:应用证据理论信息融合方法融合曲轴箱压力信号和机身振动加速度信号,进而识别活塞—缸套—活塞环系统的工作状态这一方法有效、可行。     

一种新的沥青混合料疲劳性能评价方法

根据Lemaitre应变等效假设,定义沥青混合料疲劳损伤参量,并在分析沥青混合料疲劳损伤过程的基础上,定义新的疲劳破坏标准。然后通过三分点小梁弯曲疲劳试验建立基于损伤理论的沥青混合料疲劳性能评价方法。重合性检验表明,该损伤疲劳模型与荷载控制模式无关,从而可以更合理的评价混合料疲劳性能。     

基于专家系统和证据理论的路面破损原因评价方法研究

路面破损原因评价是一项经验性很强的工作,通过采用专家系统技术,利用路面养护专家经验和知识形成产生式规则,并对单处路面破损原因进行评价。根据对单处路面破损原因的评价结果中也包含了导致整个路段路面破损主要原因的信息这一特点,介绍了引入证据理论将这方面信息提取出来,合成得出对整个路段的主要破损原因评价的方法。     

地下连续墙作为桥梁基础在软土地区的应用

本文以上海浦东国际机场1号桥的设计为背景,介绍了地下连续墙做为桥梁基础的计算模型的建立、计算参数的取值以及构造处理措施。结果表明:当条件受限制时,地下连续墙不失为一种较好的基础型式。     

路堤荷载下管桩复合地基设计理论的试验研究

介绍了管桩复合地基在某高速公路软基试验工程中的应用,并简单分析了其加固效果,进而结合已有的研究成果,提出了一套路堤下刚性桩复合地基的设计理论。通过工程实践表明,该设计理论具有在工程实践中推广运用的价值。     

长江航道承载力概念研究

以国家号召发展长江航道为背景,在生态航道建设的基础上,首次提出以满足生态效益需求为核心,兼顾经济社会发展、长江水资源综合利用等多种目标,实现长江航道建设可持续发展的长江航道承载力概念。借鉴资源承载力理论体系,运用系统理论、协同理论等理论对航道承载力系统的结构关系进行分析,并提出航道承载力的定义、内涵、特征及航道承载力发展机制。     

小方型系数船舶的船体波浪载荷综合研究

从船级社规范对于不符合主尺度比要求的船舶船体梁波浪载荷的规定出发,采用理论预报和船模试验2种综合方式,进行了小于0.6方型系数、高航速、高海况目标船的波浪载荷研究.从规范对波浪载荷的线性理论预报值进行的非线性修正,修正后中拱和中垂波浪弯矩绝对值之和与线性理论预报极值全幅值相等出发,阐述所研究船特殊主尺度比下的模型试验结果、三维非线性水弹性理论预报结果显示出的波浪载荷非线性行为;同时综合模型试验与理论预报的共同规律,研究不同波高、航速、浪向等非常规船型船体波浪载荷的强非线性行为,从而认为规范基于的线性理论预报值进行非线性修正的统一规定太过笼统,进而建议规范对波浪载荷的非线性修正予以进一步的明确区分和规定.     

A regression and beam theory based approach for fatigue assessment of containership structures including bending and torsion contributions

Container shipping has been expanding dramatically during the last decade. Due to their special structural characteristics, such as the wide breadth and large hatch openings, horizontal bending and torsion play an important role to the fatigue safety of containerships. In this study the fatigue contributions from vertical bending, horizontal bending and torsion are investigated using full-scale measurements of strain records on two containerships. Further, these contributions are compared to results from direct calculations where a nonlinear 3D panel method is used to compute wave loads in time domain. It is concluded that both bending and torsion have significant impacts on the fatigue assessment of containerships. The stresses caused by these loads could be correctly computed by full-ship finite element analysis. However, this requires large computational effort, since for fatigue assessment purposes the FE analysis needs to be carried out for all encountered sea states and operational conditions with sufficient time steps for each condition. In this paper, a new procedure is proposed to run the structure finite element analysis under only one sea condition for only a few time steps. Then, these results are used to obtain a relationship between wave loads and structural stresses through a linear regression analysis. This relation can be further used to compute stresses for arbitrary sea states and operational conditions using the computed wave loads (bending and torsion moments) as input. Based on this proposed method for structure stress analysis, an efficient procedure is formulated and found to be in very good agreement with the full-ship finite element analysis. In addition it is several orders of magnitude more time efficient for fatigue assessment of containership structures.     

基于模糊理论的船舶复合碰撞危险度计算

基于船舶领域和动界的概念,在船舶碰撞几何原理的基础上,利用模糊规则和模糊综合评价方法,本文提出一种船舶复合碰撞危险度的计算方法.确定最近会遇距离(DCPA)、最近会遇时间(TCPA)、两船距离、相对方位、船速比5个主要因素的隶属度函数,并考虑航行区域状况、能见度情况和船舶的操纵性能等对船舶碰撞危险度的隶属度函数修正.用原始数据对3种不同会遇态势进行仿真和对3种不同碰撞危险度计算结果分析比较,结果表明该方法的有效性.     

Closed-form multiclass cell transmission model enhanced with overtaking,lane-changing,and first-in first-out properties

A novel multiclass macroscopic model is proposed in this article. In order to enhance first-in, first-out property (FIFO) and transmission function in the multiclass traffic modeling, a new multiclass cell transmission model with FIFO property (herein called FM-CTM) is extended from its prior multiclass cell transmission model (M-CTM). Also, to enhance its analytical compactness and resultant computational convenience, FM-CTM is formulated in this paper as a set of closed-form matrix equations. The objective is to improve the accuracy of traffic state estimation by enforcing FIFO property when a fast vehicle cannot overtake a slow vehicle due to a limitation of a single-lane road. Moreover, the proposed model takes into account a different priority for vehicles of each class to move forward through congested road conditions, and that makes the flow calculation independent from their free-flow speeds. Some hypothetical and real-world freeway networks with a constant or varying number of lanes are selected to verify FM-CTM by comparing with M-CTM and the conventional CTM. Observed densities of VISSIM and real-world dataset of I-80 are selected to compare with the simulated densities from the three CTMs. The numerical results show that FM-CTM outperforms the other two models by 15% of accuracy measures in most cases. Therefore, the proposed model is expected to be well applicable to the road network with a mixed traffic and varying number of lanes.