沥青路面运营初期平整度竣工验收标准研究

采用数理统计原理,运用SPSS软件对陕西省7条高速公路交-竣工平整度数据进行分析,得出了陕南、关中和陕北地区路面平整度衰变幅度均值分别为0.39m/km、0.28m/km和0.24m/km,这也将作为计算竣工验收推荐值的依据;再基于交-竣工平整度变化规律,建立了平整度竣工验收推荐值的计算公式:IRIju=IRIji+IRIs,可为今后平整度竣工验收标准提供有效的理论依据。     

提升正立式结构摩托车前减震器装配一次合格率的探讨

减震器是摩托车中仅次于发动机的关键部件，其示功特性与前弹簧共同作用直接影响摩托车的减振效果和舒适性。受国内零部件加工尺寸离散率较大的影响，导致产品装配一次合格率仅为80％左右。通过采取一系列相应措施，并对供应商进行指导和提升，确保了配套件的产品质量，逐步修订了关键尺寸的公差范围，提高了减震器的一次装配合格率。     

SAC沥青混合料设计方法

通过对河北省沿海高速公路秦皇岛段进行重载交通长寿命半刚性基层沥青路面关键技术的研究,提出优化的SAC沥青混合料设计方法,尝试在解决沥青面层的早期破坏问题的同时满足面层的功能要求,可供同行参考。     

如何提高路基分层压实系数一次验收合格率

通过包西铁路通道陕西段路基土方填筑施工过程的实践,分析总结影响路基分层压实系数一次验收合格率的多种因素,有针对性地制定相应工程措施,指导施工生产。     

直线电机车辆牵引电机恒隙控制的初步研究

直线电机轨道车辆采用直线感应电机牵引、轮轨系统支撑导向,是一种新型城市轨道交通工具。本文介绍了直线电机的原理,对加拿大、日本以及广州4号线的直线电机车辆的不同牵引电机悬挂方式进行了对比分析,提出了在牵引电机悬挂系统中采用主动控制的恒隙技术的初步设想。     

上海地区细砂路基施工控制浅析

现行规范中没有明确细砂路基施工的质量控制与验收标准,从施工角度提出了填砂路基检测和施工过程控制要点,有关经验可供类似工程参考。     

Human driving data-based design of a vehicle adaptive cruise control algorithm

This paper presents a vehicle adaptive cruise control algorithm design with human factors considerations. Adaptive cruise control (ACC) systems should be acceptable to drivers. In order to be acceptable to drivers, the ACC systems need to be designed based on the analysis of human driver driving behaviour. Manual driving characteristics are investigated using real-world driving test data. The goal of the control algorithm is to achieve naturalistic behaviour of the controlled vehicle that would feel natural to the human driver in normal driving situations and to achieve safe vehicle behaviour in severe braking situations in which large decelerations are necessary. A non-dimensional warning index and inverse time-to-collision are used to evaluate driving situations. A confusion matrix method based on natural driving data sets was used to tune control parameters in the proposed ACC system. Using a simulation and a validated vehicle simulator, vehicle following characteristics of the controlled vehicle are compared with real-world manual driving radar sensor data. It is shown that the proposed control strategy can provide with natural following performance similar to human manual driving in both high speed driving and low speed stop-and-go situations and can prevent the vehicle-to-vehicle distance from dropping to an unsafe level in a variety of driving conditions.     

高速公路左侧路肩设置必要性研究

尽管<公路工程技术标准>(JTG B01-2003)中规定八车道的高速公路应当设置2.5 m的左侧硬路肩,但国内几条刚刚改建完成的八车道高速公路中没有一条设置了左侧硬路肩,甚至没有宽于0.75 m的路缘带.研究运用可接受间隙理论计算了不同流量和车道数条件下车辆从最内侧车道穿插变道停驶到右侧路肩这一过程的概率和所需距离,并通过交通事故数据调研,分析了左侧路肩设置对提高交通安全的影响,从运行效率和交通安全两个方面定性和定量分析了左侧路肩设置的必要性.     

A measurement to driving situation awareness in signalized intersections

Drivers get involved easily in Left-Turn Across Path with Opposite Direction Traffic (LTAP-OD) conflicts at signalized intersection with unprotected left-turn phasing. This study classified the left-turn drivers’ performance into four types: (1) the correct acceptance of safe lags/gaps, (2) the correct rejection of dangerous lags/gaps, (3) the false rejection of safe lags/gaps and (4) the false acceptance of dangerous lags/gaps. Based on the high mounted video camera data, the logistic regression model was used to obtain the critical gaps for estimating whether the lags/gaps were safe or not. The results show that the cognition behavior of the left-turn drivers should be improved while the gap/lag is drawn near the critical gap. Furthermore, the conservative drivers are more likely to reject the larger lags/gaps and yield the right-of-way to the opposing vehicles. Simultaneously the poor response execution may cause drivers to have difficulties during the turning performance when the lags/gaps are large enough. These results could be used as the basis for a discussion of the right time to support the drivers.     

阀控式铅酸蓄电池充电接受能力的研究状况

充电接受能力是阀控式铅酸蓄电池一项重要性能，充电接受好可保证电池正常使用和延长电池的使用寿命。文章从板栅合金、添加剂、充电制度三方面概述VRLA电池充电接受能力的研究状况。