A Numerical Model for Multiple Phase Transformations in Steels during Thermal Processes

IntroductionltiswellknownthatmetallmpicalstrUcforeofsteelsandheattransferarefullycouPled.PhasechangesdependontemPertheeevoluton,whereastemPertheeisinfluencedbycontrastsofmaterialcharacteristicsbetWeenphasesandlatenheateffects.AlotofworkhasbeenpefformedonthssubeCt,andclassicalmodelsarenowwidelyimPlementedintofiniteelementcomPutercodes[l][2][31[4][5][61.Thesemodelsaregenerallybasedonf.AVramityPekinetics[7][8]l9]Whnthephasechangeisgovernedbydiffusion,.TheKoistinen-Marburgerlaw[l0]fOrmfornsi…     

船舶传染病隔离舱空调系统设计的探讨

介绍了船舶传染病隔离负压舱的空调系统设计的特点和思路,结合一典型传染病舱模型进行空调系统设计,对舱内污染控制分区进行了分区设置,对换气次数、负压值、空调负荷、空气处理等主要技术指标进行了计算和结果分析。结合舱内空调负荷介绍了通风换气设备与节能措施,根据传染病隔离负压舱空调系统的特点选取了相应的热回收装置,并描述了其工作原理和特点。     

热扰动对冻土区片块石路基热状态变化特性的影响研究

随着我国现阶段的公路建设里程不断增长,相较于常规平原地区,高寒冻土区公路建设过程要克服冻土路基带来的各类不良影响。针对热扰动对冻土区片块石路基带来的影响进行深入研究,在分析该区域高等级公路路基状态的过程中,采集片块石路基的温度状态、吸放热状态和冻融循环状态等方面数据,探讨了其热状态变化的整体规律。研究结果显示:片块石路基在冻土区有着很好的热稳定性作用,可实现主动冷却作用;片块石路基能通过加快温差空气间的流通速度,避免热扰动对路基温度产生过于明显的影响,从而减少热扰动所带来的各类路基病害;片块石路基正下方的最大融化深度正逐步提高;片块石路基的阴阳面存在吸放热不平衡的情况,阳面路肩吸放热量达到阴面路肩吸放热量的2.7倍,阳面坡脚吸放热量达到阴面坡脚吸放热量的2.3倍;随着片块石路基阴阳面吸放热不平衡的发展,其对应的阴面冻土升温速度小于阳面冻土,阴面冻土上限发展程度同样小于阳面冻土。     

Mitigating the effect of impact loading on a vehicle using an essentially nonlinear absorber

The aim of this study is to investigate the ability of an essentially nonlinear vibration absorber to mitigate the large accelerations transmitted to a passenger compartment of a vehicle which is subjected to shock-type transient loading at the chassis. For such problems, the induced vibration typically attains its maximum value shortly after the application of the loading; thus, it may be impossible to dissipate a major portion of the input energy prior to the occurrence of the peak response. Here, a class of absorbers possessing a form of discontinuous essential stiffness nonlinearity is employed to achieve the desired mitigation. In this paper, we apply a single vibro-impact (VI) absorber to the chassis and examine whether the resulting energy transfer mechanism is an effective way to reduce the peak value of the inertial force measured at the passenger compartment. The influence of the absorber parameters is first studied based on a practical impulsive force, and the optimal design of the absorber is then obtained. Next, an asymmetric clearance arrangement of the absorber is suggested to facilitate the mitigation. Finally, an impulsive acceleration excitation is applied to the system to examine the robustness and efficacy of the optimised absorber. Results of numerical simulations demonstrate that a properly designed VI absorber can significantly decrease the maximum inertial force at the passenger compartment, generated by external impulsive excitations.     

液态硫磺运输船热煤油加热系统及罐体保温研究

针对液态硫磺的物理特性及运输条件,使用热煤油加热系统对液态硫磺进行保温、加热.对液态硫磺船加热系统中的硫磺罐保温层、热煤油加热系统做了分析,提出硫磺热煤油加热系统的可行性设计方法、经济保温层的计算公式,阐述了硫磺罐加热盘管设计应注意的问题.     

台北捷运办理路线、场、站土地开发之检讨及执行成效

台北都会区大众捷运系统为顺利取得捷运系统用地充分土地利用,以捷运土地开发方式提供民众在征收以外之一项选择,从而减少政府财政负担,增加财务效益。并导入以大众运输为导向发之土地开发(Transit Oriented Development TOD)规划理念,同时强化土地开发使用的强度增加使用诱因;规划健全捷运转乘需求,以达到运具整合之功能,并纳入公共元素,进行整体开发。为了捷运土地开发能更顺利、公平、效率的推动,藉本文将施行成效及与相关捷运场、站共同开发之案例进行检讨,提供其他类似开发案参考。     

基于故障树的船用核动力装置维修性建模研究

结合船用核动力装置的特点,阐述了建立基于故障树维修性模型的方法和流程.以建立故障树为基础,建立了关于船用堆余热排出系统基于故障树的维修性模型,对其进行定量分析得到系统修复性维修时间.该方法直接利用可靠性分析中的故障树建立模型,节省了建模强度,计算结果由可靠性数据支持,克服了以往定量分析中维修性数据不足的缺点.     

北京地铁新线100km/h车辆热容量问题分析

对北京地铁新线100 km/h车辆热容量问题进行了分析,对4种基础制动装置的配置方案进行了探讨。     

垃圾转运车上翻式后门装置

介绍了某垃圾转运车的后门装置,该后门装置在液压缸的驱动下,可上翻至垃圾箱的顶部,从而方便垃圾从箱体后门尾部装入。     

How well a single-track linear model captures the lateral dynamics of long combination vehicles

ABSTRACT

The effect of centre-of-gravity heights on the high-speed performance measures of long combination vehicles including truck with double centre-axle trailers, Nordic, and A-double combination vehicles is investigated. The high fidelity three-dimensional models, used in this research, are validated against physical test data. These models are often accurate in terms of the actual dynamic behaviours of the vehicle. On the other hand, the simple yaw-plane single-track models with linear tires require less number of vehicle parameters. In this paper, it is investigated how accurate the estimations of performance measures are at high forward speeds by such single-track linear (STL) models. The influence of load height is especially studied. The high-speed performance-based standard or PBS measures considered are rearward amplifications of both lateral acceleration and yaw velocity; lateral load transfer; yaw damping and high-speed transient offtracking. The results show that tire relaxation has a large effect and it is rather easy to add to an STL model, so it is assumed to be modelled in STL. With realistically high payload and a required accuracy of PBS measures of approximately 10%, only the accuracy of rearward amplification of yaw velocity calculated by the frequency response is fulfilled by the STL. With low payload, the same statement is valid, but with around 5% in required accuracy. The roll dynamics effects are more important than the tire non-linearities.