低排量下并联甩泵分析与对策

乌鄯原油支干线乌鲁木齐输油首站低排量下给油泵特殊工况并联运行极易出现甩泵故障,给输油生产带来困扰和设备危害。通过对几年来甩泵分析,找出原因,制定对策（提高来油温度、缩小过滤器差压报警值、流量计并行、降低外输排量等）,减少了并联运行次数,避免了并联甩泵现象的再次发生,为密闭输油生产中合理配泵提供参考。     

低温热水地板辐射采暖系统水力平衡分析

分析了地暖系统中重力循环作用压力对共用立管的影响,运用基尔霍夫定律分析了地暖系统中下分异程式双管系统和下分同程式双管系统的水力平衡状况,得出了在没有平衡调节装置的情况下,下分异程式双管系统更适用于地暖系统的结论,通过计算确定了地暖系统共用立管水力平衡的影响因素和平均比摩阻的范围.     

Historic vehicles: an overview from a transport policy perspective

Historic vehicles (HVs) are the heritage of road transport that have surprisingly received little attention in the academic literature. This study presents an overview of the literature on HVs, focusing on the three topics that dominate the policy debate on transport: environmental, safety and congestion impacts. We observed that polluting emissions of HVs are per kilometre much higher (often a factor 5 or more) than those of moderns vehicles. The annual average mileage per vehicle per year of HVs is much lower than other vehicles. The lower active and passive safety levels of HVs are compensated by the way these vehicles are driven, resulting in the risk factors per kilometre being roughly equal or lower than other vehicles. The contribution of HVs to congestion is negligible. However, the transport policy discourse is divided on the topic of HVs. More comprehensive and effective laws and regulation are needed to protect this aspect of the heritage of road transport whilst concurrently avoiding or limiting the problems caused by them.     

低质心混凝土搅拌车设计原理与结构

低质心混凝土搅拌车的主要结构和特点。针对市场上大容量混凝土搅拌车质心高的结构特点,介绍了一种能改善整车行驶稳定性的     

几种常用公路交通噪声预测模式准确性分析

根据成温邛高速公路和成绵高速公路的交通量、车型及车速等监测数据,应用美国联邦公路管理局(FHWA)噪声预测模式、JTG B03-2006推荐噪声预测模式和HJ 2.4-2009推荐噪声预测模式,分别对两条高速公路进行噪声预测,将噪声预测值与实测值进行对比,分析在相同车流量、车型及车速等条件下各预测模式预测值与实测值的差值大小,并分析其原因,得出在高速公路交通噪声预测的准确性上,HJ 2.4-2009预测模式优于FHWA预测模式和JTG B03-2006预测模式。     

城市环保型混凝土工厂设计应用研究

分析了混凝土工厂的基本构造及工作原理,阐述了环保型混凝土工厂设计的环境标准,就混凝土工厂的粉尘和噪音源进行了论述.结合实践,着重对混凝土工厂的粉尘和噪音控制方法进行了详实的分析研究.     

改变DRP控制逻辑以解决ABS阀体噪声

针对某ABS开发项目中车辆紧急制动后所产生的噪声问题进行了分析,得知是DRP控制逻辑由激活状态转变成逐渐加压状态时会产生ABS阀体噪声。修改原DRP控制逻辑后进行了试验验证。结果表明,采用修改后的DRP控制逻辑,当车辆减速度小于门槛值时,DRP将会从激活状态直接转变成关闭状态,而不再经过逐渐加压状态,使噪声问题得以解决。     

高速铁路低矮路堤灰土桩复合地基的动力特性分析

利用有限元软件MIDAS/GTS,分别建立了灰土桩复合地基和未经处理的黄土地基上铁路路基的三维有限元模型,用轨道不平顺法模拟列车荷载,分析计算了在不同速度列车荷载作用下不同路堤高度下地基土中动应力的分布,得出了桩土应力比的变化规律和地基瞬时变形规律。     

不同交联度环氧沥青混合料低温弯曲性能研究

采用交联度分别为75.3%,71.4%,67.3%和58.4%的环氧沥青混合料进行-20℃,-10℃,0℃,10℃温度下小梁三点弯曲性能试验,构建了混合料弯曲强度、弯曲模量、弯曲破坏应变及弯曲应变能密度与温度、交联度的关系方程。结果表明：不同交联度的环氧沥青混合料弯曲强度与模量随着温度的提高而降低,弯曲破坏应变与弯曲应变能密度随着温度的提高而增大;不同交联度的环氧沥青混合料弯曲强度、弯曲模量、弯曲破坏应变及弯曲应变能密度与温度关系基本一致,各弯曲性能参数的温度敏感区间基本相同;温度敏感区间弯曲性能参数变化幅度较大,低于温度敏感区间,则弯曲性能参数变化幅度较小;环氧沥青混合料低温弯曲性能参数与温度、交联度之间具有较好相关性,提出的回归方程可以用于混合料低温弯曲性能预测。     

Adhesion estimation at the wheel–rail interface using advanced model-based filtering

The railway industry in the UK is currently expanding the use of condition monitoring of railway vehicles. These systems can be used to improve maintenance procedures or could potentially be used to monitor current vehicle running conditions without the use of cost prohibitive sensors. This paper looks at a novel method for the online detection of areas of low adhesion in the wheel/rail contact that cause significant disruption to the running of a network, particularly in the autumn season. The proposed method uses a Kalman–Bucy filter to estimate the creep forces in the wheel–rail contact area; post-processing is then applied to provide information indicative of the actual adhesion level. The algorithm uses data that, in practice, would be available from a set of modest cost inertial sensors mounted on the vehicle bogie and wheel-sets. The efficacy of the approach is demonstrated using simulation data from a nonlinear dynamic model of the vehicle and its track interface.