船体三维网格的自动生成算法及其图形用户界面的设计

本文介绍的三维湿表面网格的自动生成算法,不但可完成型值表各站型线的等弧长插值拟合,而且能够在沿船长方向的任意位置上进行站的加密和插值,从而自动生成三维湿表面网格。该算法的实现依赖于一套完整的图、形用户界面。此界面用Ｕｎｉｘ平台的Ｍｏｔｉｆ、Ｃ和ＧＬ编制,友好灵活,方便易用。     

Fault tolerant nonlinear control with applications to an automated transit bus

This paper presents an integrated structure for a passive and active fault tolerant control (FTC) design approach in the framework of a robust nonlinear control technique called Dynamic Surface Control (DSC). As motivated by the automated vehicle application, we consider two categories of possible faults: pre-specified (a priori) and non-specified faults. It is first shown that DSC can be considered as a passive FTC approach in the sense that it gives simultaneous robust stability to a set of nonlinear systems even in the presence of model uncertainties and the pre-specified faults. Then, the non-specified fault is classified depending on the fault’s impact on the closed-loop system and isolatability from a fault detection and diagnosis (FDD) system. If a fault is both intolerable and isolatable, an active FTC approach is taken which includes FDD and controller reconfiguration. More specifically, trajectory reconfiguration is considered to accommodate the actuator fault, i.e., to compensate for the performance loss due to the fault within the framework of a switched hierarchical structure. Finally, the integrated structure for the longitudinal control of an automated transit bus is designed through the proposed method. Simulation results of the fault tolerant controller are shown for both single and multiple multiplicative faults. This controller was implemented on the California PATH transit buses in a demonstration of automated public transportation technology in San Diego, California in August of 2003.     

高速公路面层出现裂缝的原因与预防措施

通过对河北省高速公路路面屡次出现裂缝的现象进行调查分析,并结合秦皇岛市京沈高速公路大修工程的实践,综合分析了路面产生裂缝的主要原因,并提出有效防治裂缝产生的措施和建议.     

中职普通车工实训课程项目化教学的实践探索

为了充分发挥出中职院校的作用,推动当地经济水平的提升,中职院校在进行人才培养工作时,应该培养更多实践能力较强的人才。项目化教学的教学效果较为明显。本篇文章简要分析了中职院校普通车工实训教学中出现的不足,提升了中职普通车工实训课程项目化教学实践措施,探究了项目化教学获得的成绩,希望能够为中职院校普通车工实训课程的顺利开展提供支持。     

沥青混凝土热铺层厚度测量仪设计

针对在公路养护与沥青混凝土路面摊铺过程中,沥青混凝土的厚度控制对施工成本、路面平整度、路面质量及验收结果的影响,设计了一种能够精确测量沥青混凝土热铺层厚度的实用新型厚度测量仪,克服了目前公路工程施工中沥青混凝土热铺层厚度测量技术中的缺点与不足     

长雁8号工程船15 kN液压容缆绞车排绳装置故障分析和改进设计

文章分析了长雁8号工程船15 kN液压容缆绞车排绳装置在使用过程中发生故障的原因,提出了改进设计方法,可供同行参考.     

基于遗传算法优化模糊控制器的船舶航向控制

针对模糊控制器中的量化因子、比例因子、积分系数、模糊规则之间互相耦合，人工整定困难的问题，提出了一种基于遗传优化的船舶航向模糊PID自动控制算法。仿真对比试验表明，经遗传优化后的船舶航向模糊PID控制性能得到了极大的提高，系统无超调，上升快，工作稳定，具有较强的鲁棒性。     

高速公路加铺热拌超薄磨耗层级配设计研究

热拌超薄磨耗层是公路预防性养护的有效技术之一，基于某高速超薄磨耗层预防性养护工程，对不同级配进行路用性能试验研究。结果表明，不同级配混合料孔隙率随着2.36 mm筛孔通过率的增加而降低，细集料和矿粉均会填充混合料孔隙而且矿粉的填充效果为细集料的3倍。随着超薄磨耗层级配由粗变密，混合料马歇尔稳定度增加，肯塔堡飞散损失降低，疲劳寿命下降，采用矿粉作为填料的混合料性能显著优于细集料。相关性分析结果表明，超薄磨耗层混合料马歇尔稳定度，飞散损失以及疲劳性能与孔隙率存在较好的相关性，TSR结果与沥青膜厚度存在较好的相关性。超薄磨耗层的设计需要充分考虑孔隙率与沥青膜厚度指标。     

Assessment of the volume of fluid method for free-surface wave flow

This study was concerned with the free-surface wave flow around a surface-piercing foil. The volume of fluid method implemented in a Navier–Stokes computational fluid dynamics code was employed. Three widely used discretization schemes for the volume of fluid method were assessed for a test case that involved general ship waves, spilling breaking waves in front of the leading edge, and bubbly free surfaces in separated regions. A single computational approach was selected for the comparison, and a grid-dependence study was carried out. The computational results were validated against existing experimental data, showing good agreement. The validation results suggest that all three discretization schemes perform well, but the best and most efficient results were obtained using the high-resolution interface capturing scheme.     

Analysis on Ground Surface Deformation and Influence of Construction Parameters Caused by Two Different Shield Machines in Double-tube Tunnelling北大核心CSCD

Based on a shield-driven running tunnel project of Hangzhou Metro Line 2, this paper carries out field measuring of the ground surface deformation caused by two different shield machines in double-tube tunnelling in soft soil areas, obtains the laws of the surface deformation caused by shield-driven double-tube tunnelling and verifies the applicability of the modified Peck formula to double-tube tunnelling. The results show that in soft soil areas the impacts on ground surface deformation caused by different shield construction parameters in the previously and subsequently excavated tunnels are different, while the surface deformation changes sharply before and after the shield machine passing through the cutting face, and a rebound phenomenon occurs when the shield tail passes through the cutting face due to the influence of the grouting; The cutterhead torque of the shield machine in soft soil areas can be composed of five calculation factors, and the calculation results are in good agreement with the measured values. The larger the opening rate of the shield cutterhead is, the larger the average torque value will be, the higher the percentage of large ground loss rate will be, and the larger the maximum ground surface settlement will be; The ratio of cutterhead torque T to mucking volume per ring Q is used as the control parameter for analyzing the ground surface settlement, and a certain positive correlation between the ratio and the surface settlement value is determined, the smaller the cutterhead opening rate is, the more accurate the fitting results will be. © 2022, Editorial Office of "Modern Tunnelling Technology". All right reserved.