回龙观东站～立水桥站区间下穿城铁夯管施工技术

北京回龙观东站～立水桥站污水工程下穿城铁、国铁，所处位置特殊，地质条件复杂，地下水较为丰富，施工沉降要求高，难度大。采用夯管法施工后，有效的提高了施工质量和进度，保证了城铁、国铁的正常运营，创造了良好的经济效益。夯管法比暗挖法和顶管法更为简单快捷，更能保证施工安全。介绍了夯管法施工的特点和施工方法要点及施工中的关键问题（如夯管方向偏差、地表沉降、夯进停滞不前等）及其处理措施。     

复合三角Bezier曲面和平面的求交及其应用

本文提出了一种根据组成复合三角Ｂｅｚｉｅｒ曲面的各三角Ｂｅｚｉｅｒ同片与平面的相交类型，采用不同方法求取交点；通过迭代求精，求近曲面点和边界点计算，由一个初始交点顺序跟踪出整条交线的方法。这种 包括各曲面片边界点的交线计算方法可处理复合曲面与平面间形成多条交线，交线环的情况，所得到的交相应曲面片的参数值，测试显示这种交线计算简单可靠，精度高，在自由曲面数控加工编程中具有广泛的应用场合，对提高汽车等     

喷撒颗粒的增粘机理研究

本文建立了向轮轨接触间喷撒颗粒时的摩擦模型，并将此摩擦模型应用于修正的轮轨粘着理论中，对喷撒颗粒的增粘机理进行了理论研究。从理论计算结果可以看出，向轮轨接触间喷撒颗粒的增粘效果是非常明显的，且增粘效果和轮轨的表面状态、颗粒的质量和进入轮轨接触面间的颗粒数量有关。     

车身外形CAGD中磨光三角域曲面的计算和应用

三角域曲面设计一直是车身表面造型的难点。本文建立了磨光型三角域自由 曲面的计算模型，开发了软件，通过实际设计实例证明该方法光顺性好，计算稳定，效率高。     

A local model for the simulation of two–dimensional spilling breaking waves

A numerical model for the simulation of two dimensional spilling breaking waves is described. It is derived from a previous model which, in turn, takes its underlying ideas from the Cointe and Tulin theory of steady breakers. With respect to the former model, the present one is local, i.e., the inception, extension, and geometry of the breakers are determined through the local shape of the water surface. The model has been implemented in a RANSE code, which was developed for the simulation of ship flows, through a modification in the boundary conditions. This yields a simple and effective way to reproduce the breakers influence on the underlying flow. The resulting code has been used to simulate the flow past a submerged hydrofoil. The numerical results are compared with those of the previous model and with the experimental data obtained by Duncan.     

船体三维网格的自动生成算法及其图形用户界面的设计

本文介绍的三维湿表面网格的自动生成算法,不但可完成型值表各站型线的等弧长插值拟合,而且能够在沿船长方向的任意位置上进行站的加密和插值,从而自动生成三维湿表面网格。该算法的实现依赖于一套完整的图、形用户界面。此界面用Ｕｎｉｘ平台的Ｍｏｔｉｆ、Ｃ和ＧＬ编制,友好灵活,方便易用。     

Fault tolerant nonlinear control with applications to an automated transit bus

This paper presents an integrated structure for a passive and active fault tolerant control (FTC) design approach in the framework of a robust nonlinear control technique called Dynamic Surface Control (DSC). As motivated by the automated vehicle application, we consider two categories of possible faults: pre-specified (a priori) and non-specified faults. It is first shown that DSC can be considered as a passive FTC approach in the sense that it gives simultaneous robust stability to a set of nonlinear systems even in the presence of model uncertainties and the pre-specified faults. Then, the non-specified fault is classified depending on the fault’s impact on the closed-loop system and isolatability from a fault detection and diagnosis (FDD) system. If a fault is both intolerable and isolatable, an active FTC approach is taken which includes FDD and controller reconfiguration. More specifically, trajectory reconfiguration is considered to accommodate the actuator fault, i.e., to compensate for the performance loss due to the fault within the framework of a switched hierarchical structure. Finally, the integrated structure for the longitudinal control of an automated transit bus is designed through the proposed method. Simulation results of the fault tolerant controller are shown for both single and multiple multiplicative faults. This controller was implemented on the California PATH transit buses in a demonstration of automated public transportation technology in San Diego, California in August of 2003.     

高速公路面层出现裂缝的原因与预防措施

通过对河北省高速公路路面屡次出现裂缝的现象进行调查分析,并结合秦皇岛市京沈高速公路大修工程的实践,综合分析了路面产生裂缝的主要原因,并提出有效防治裂缝产生的措施和建议.     

新疆阿拉山口地区盐渍土盐胀与溶陷特性研究

以阿拉山口市—温泉县—G30公路建设项目为依托,通过控制变量法研究冻融循环次数、含盐率、含水率及荷载对盐渍土盐胀和融陷变形量的影响情况。试验结果表明:在进行盐胀试验时,盐胀性随着盐渍土含水率的增加逐渐增大;随着含盐率的增加,盐渍土盐胀特性也更明显;随着温度的降低,盐渍土盐胀量也逐渐增大,但当含盐率和含水率到达一定程度后,盐胀量则不会随着温度下降而增大;在进行溶陷试验时,在不考虑含盐量的情况下,各组土体均随着含水率增高而沉降量越大;在荷载相同的情况下,含盐量越大,沉降量越大;随着压力的增加,盐渍土仍会发生较大沉降。     

沥青混凝土热铺层厚度测量仪设计

针对在公路养护与沥青混凝土路面摊铺过程中,沥青混凝土的厚度控制对施工成本、路面平整度、路面质量及验收结果的影响,设计了一种能够精确测量沥青混凝土热铺层厚度的实用新型厚度测量仪,克服了目前公路工程施工中沥青混凝土热铺层厚度测量技术中的缺点与不足