利用Boussinesq方程对作用于大直径圆筒结构上的波浪力进行数值模拟

采用求解Beji和Nadaoka改进的Boussinesq方程,模拟了波浪在多个串连大圆筒结构前的反射,得到了作用于圆筒结构上的波浪力。空间离散采用有限元方法,可以较好地适应圆筒结构表面形成的复杂边界形状。数值模拟结果与公开发表的物理模型试验成果进行了比较,符合较好。     

Neptune轮机模拟器的功能及应用

介绍了NORCON公司研发的Neptune模拟器的主要功能及功能的设计方案,剖析了其搭建框架,分析其故障设置及评分体系的机理,从而阐述了先进模拟器的现状、发展水平及趋势。     

CCS船体结构板格屈曲强度直接计算评估方法

介绍了中国船级社(CCS)有关指南文件中船体结构屈曲强度校核的直接计算方法,并与国外船级社的计算法作了比较。另外,还介绍了开发的相应应用软件系统。     

Ramp meters on trial: Evidence from the Twin Cities metering holiday

Ramp meters in the Twin Cities have been the subject of a recent test of their effectiveness, involving turning them off for eight weeks. This paper analyzes the results with and without ramp metering for several representative freeways during the afternoon peak period. Seven performance measures: mobility, equity, productivity, consumers’ surplus, accessibility, travel time variation and travel demand responses are compared. It is found that ramp meters are particularly helpful for long trips relative to short trips. Ramp metering, while generally beneficial to freeway segments, may not improve trip travel times (including ramp delays). The reduction in travel time variation comprises another benefit from ramp meters. Non-work trips and work trips respond differently to ramp meters. The results are mixed, suggesting a more refined ramp control algorithm, which explicitly considers ramp delay, is in order.     

《钢结构设计规范》在起重扒杆设计中的应用

在起重船扒杆设计中，现行《船舶及海上设施起重设备规范》没有提供直接强度计算方法，容易导致强度计算缺乏统一标准和审图产生困难。作者认为，《钢结构设计规范》（GB50017）提供的有关计算会式可作为船舶工程中起重扒杆以及其它压弯构件的计算方法。     

膜电解法处理含镍废水的技术经济性能研究

采用单阴膜电解法对含镍废水进行处理，在理论分析的基础上研究了电解液pH值、Ni^2＋浓度、电流强度等影响因素。实验结果表明，对于pH值为0．5-1．0、Ni^2＋的平均质量浓度为1400mg／L的含镍废水，在电解电流150mA、电压5V的条件下，控制电解时间为20-24h，调节电解液初始pH值为4，采用离子交换法将Ni^2＋富集到14000mg／L时，平均电流效率可达到90．7％，镍的平均去除率为88．7％，可比普通电化学法电流效率提高30％，节能50％以上。     

Second-order perturbation added mass fluctuation on vertical vibration of tension leg platforms

Total motion in waves can be considered as a superposition of the motion of the body in still water and the forces on the restrained body. In this study the effect of added mass fluctuation on vertical vibration of tension leg platforms (TLP) in the case of vibration in still water for both free and forced vibration subjected to axial load at the top of the leg is presented. This effect is more important when the amplitude of vibration is large. Also this is important in fatigue life study of tethers. The structural model used here is very simple. Perturbation method is used to formulate and solve the problem. First- and second-order perturbations are used to solve the free and forced vibrations, respectively.     

转臂轴箱定位节点位置对机车动力学性能影响分析

利用SIMPACK建立某出口2B0机车动力学模型,分析了转臂轴箱定位节点的纵向位置对机车动力学性能的影响.研究表明节点纵向位置对机车横向稳定性有较显著影响,而对机车直线和曲线通过性能影响不大.得出了在动力学模型中,需要把转臂作为一个单独元件考虑,以减小计算误差的结论.     

浅埋大跨度隧道的合理施工工法

采用平面弹塑性有限单元法研究浅埋大跨度隧道的合理施工工法。以实际施工中拟定的双侧壁导坑加拱部跳挖法为基础,采用开挖分步相同、开挖顺序不同的三种施工工法。工法一和工法二均先开挖左侧壁导坑,再开挖右侧壁导坑,工法一先开挖两边,再开挖中间,工法二先开挖中间,再开挖两边;工法三的左、右两侧导坑同时开挖,拱部土体先开挖中间、再开挖两边。对三种施工工法产生的地面沉降、洞周塑性区及洞周变形通过有限元数值模拟对比分析,认为工法三最为不利,工法一是最优的。但考虑现有施工条件工法二为实际施工过程中拟采用的工法,该工法引起的地面沉降最大值可控制在30mm以内,满足沉降控制及对周围环境保护的要求。研究认为:若地面有建筑物需要保护,应先开挖邻近建筑物一侧的导坑,拱部也应先开挖邻近建筑物一侧的土体。     

铁路货物运输的随机过程分析和及时送达概率估计

应用随机过程理论，分析铁路运输系统中货物及时送达的概率分布，得到货物运输延续时间的平均值，为实现用户要求的运到期限提供了合理保证，并可通过评估与货主商定的运到期限与实际货物送达时间误差的概率，来找到货物及时送达过程中的关键环节，改进货物送达流程。最后举例说明它的应用。