考虑空车调配协调的货物列车开行方案优化研究

为实现空车调配与货物列车开行方案协调优化，结合基本运行图架构与车流径路，构建货运时空服务拓展网络。考虑配空与装卸取送、集编发等环节的时间接续要求，节点与区段不对流空车要求，以重车流全程运送与空车配送等广义总费用最少为目标，建立整数规划弧路模型。针对既有算法设计局限性，结合重车或空车配空的时间接续要求，提出将不同的 k 短路重车流方案与空车配空方案相关联的改进可行解构造方法，设计混合差分进化求解算法。实例研究表明，考虑空车调配进行重车、空车流组织协调优化，能够减少空车走行费用，及时满足装车需求，有效保证作业车流配合中转车流集结编组及时挂线，提高方案可实施性。     

A flexible traffic stream model and its three representations of traffic flow

To connect microscopic driving behaviors with the macro-correspondence (i.e., the fundamental diagram), this study proposes a flexible traffic stream model, which is derived from a novel car-following model under steady-state conditions. Its four driving behavior-related parameters, i.e., reaction time, calmness parameter, speed- and spacing-related sensitivities, have an apparent effect in shaping the fundamental diagram. Its boundary conditions and homogenous case are also analyzed in detail and compared with other two models (i.e., Longitudinal Control Model and Intelligent Driver Model). Especially, these model formulations and properties under Lagrangian coordinates provide a new perspective to revisit the traffic flow and complement with those under Eulerian coordinate. One calibration methodology that incorporates the monkey algorithm with dynamic adaptation is employed to calibrate this model, based on real-field data from a wide range of locations. Results show that this model exhibits the well flexibility to fit these traffic data and performs better than other nine models. Finally, a concrete example of transportation application is designed, in which the impact of three critical parameters on vehicle trajectories and shock waves with three representations (i.e., respectively defined in x-t, n-t and x-n coordinates) is tested, and macro- and micro-solutions on shock waves well agree with each other. In summary, this traffic stream model with the advantages of flexibility and efficiency has the good potential in level of service analysis and transportation planning.     

HXD1型机车自动驾驶系统设计与应用

主要介绍HXD1型交流传动电力机车的自动驾驶系统方案设计与应用情况,以机车改动最小、成本最低为原则,通过加装自动驾驶系统设备、通信及供电线缆实现自动驾驶功能。通过机车自动系统的成功运用,降低了人工劳动强度,杜绝了人为失误因素,提升了机车操纵水平和操纵一致性。     

Modeling the impacts of mandatory and discretionary lane-changing maneuvers

In this paper, a novel mesoscopic multilane model is proposed to enable simultaneous simulation of mandatory and discretionary lane-changing behaviors to realistically capture multilane traffic dynamics. The model considers lane specific fundamental diagrams to simulate dynamic heterogeneous lane flow distributions on expressways. Moreover, different priority levels are identified according to different lane-changing motivations and the corresponding levels of urgency. Then, an algorithm is proposed to estimate the dynamic mandatory and discretionary lane-changing demands. Finally, the lane flow propagation is defined by the reaction law of the demand–supply functions, which can be regarded as an extension of the Incremental-Transfer and/or Priority Incremental-Transfer principles. The proposed mesoscopic multilane cell transmission model is calibrated and validated on a complex weaving section of the State Route 241 freeway in Orange County, California, showing both the positive and negative impact of lane changing maneuvers, e.g., balancing effect and capacity drop, respectively. Moreover, the empirical study verifies that the model requires no additional data other than the cell transmission model does. Thus, the proposed model can be deployed as a simple simulation tool for accessing dynamic mesoscopic multilane traffic state from data available to most management centers, and also the potential application in predicting the impact of traffic incident or lane control strategy.     

内河船舶波浪载荷研究

利用内河波浪散布图和修订波浪谱对内河系列船舶进行了波浪载荷的计算预报,首次分析了内河船舶波浪载荷的规律和特点,并与俄罗斯内河登记局(RRR)和法国-德国船级社(B-G)的内河规范载荷对应的等效模数要求进行了比较分析。结合实船测试结果表明：波浪载荷变化规律与国外同类规范一致,预报波浪载荷水平与测试结果及国外同类规范要求相当。内河船舶波浪载荷预报应考虑航速和水深的影响,载荷预报结果可以作为制定内河波浪载荷公式的基础。     

地铁与市郊铁路过轨运营下列车开行方案研究

在分析地铁与市郊铁路过轨运营特点的基础上,以乘客节省的总旅行时间最大化和地铁运营企业增加的总费用最小化为目标函数,建立了过轨运营下列车开行方案双目标规划模型,并设计了基于模糊数学规划的求解算法.以某两条轨道交通线路为算例,研究过轨运营开行方案并对相关参数进行灵敏度分析.研究结果表明,地铁与市郊铁路过轨运营既可节省乘客总旅行时间又可增加运营企业收益,且过轨客流需求越大、过轨站换乘时间越长、过轨方缴纳的过轨费用越少、过轨列车运营组织方案越合理,过轨运营效果越显著.     

Genetics of traffic assignment models for strategic transport planning

This paper presents a review and classification of traffic assignment models for strategic transport planning purposes by using concepts analogous to genetics in biology. Traffic assignment models share the same theoretical framework (DNA), but differ in capability (genes). We argue that all traffic assignment models can be described by three genes. The first gene determines the spatial capability (unrestricted, capacity restrained, capacity constrained, and capacity and storage constrained) described by four spatial assumptions (shape of the fundamental diagram, capacity constraints, storage constraints, and turn flow restrictions). The second gene determines the temporal capability (static, semi-dynamic, and dynamic) described by three temporal assumptions (wave speeds, vehicle propagation speeds, and residual traffic transfer). The third gene determines the behavioural capability (all-or-nothing, one shot, and equilibrium) described by two behavioural assumptions (decision-making and travel time consideration). This classification provides a deeper understanding of the often implicit assumptions made in traffic assignment models described in the literature. It further allows for comparing different models in terms of functionality, and paves the way for developing novel traffic assignment models.     

LED灯具在高速列车照明系统中的应用

随着我国高速铁路事业的发展,旅客对车内照明环境品质的要求越来越高,在我国高速列车照明设计中广泛采用LED灯具作为光源。通过对高速动车组车载灯具与25T型列车传统车载灯具的测试对比,总结出LED灯具在发光效率等方面相对于传统灯具的优势,为高速动车组室内照明设计提供依据。     

城市轨道交通列车控制仿真模型研究

列车运行控制系统的应用,有效地提高了城市轨道交通的运行效率.由于缺乏相关的技术参数,应用传统牵引计算理论方法的列车运行控制仿真系统,若未充分考虑系统控车的特性,在工程应用中控制的精度将无法保证.本文着重考虑信号系统工程设计的限制条件,将列车的加减速性能和速度控制策略作为主要研究对象,构建基于能量守恒原理和信号控制条件的列车速度控制仿真模型.在此基础上设计仿真模型,实现所需要的系统功能结构和仿真流程,并开发形成软件系统.在实际运行线路案例研究中,与采用通用列车运行仿真系统获得的结果比较,验证本文所建仿真模型的精度和工程适用性.     

Modelling,simulation and applications of longitudinal train dynamics

ABSTRACT

Significant developments in longitudinal train simulation and an overview of the approaches to train models and modelling vehicle force inputs are firstly presented. The most important modelling task, that of the wagon connection, consisting of energy absorption devices such as draft gears and buffers, draw gear stiffness, coupler slack and structural stiffness is then presented. Detailed attention is given to the modelling approaches for friction wedge damped and polymer draft gears. A significant issue in longitudinal train dynamics is the modelling and calculation of the input forces – the co-dimensional problem. The need to push traction performances higher has led to research and improvement in the accuracy of traction modelling which is discussed. A co-simulation method that combines longitudinal train simulation, locomotive traction control and locomotive vehicle dynamics is presented. The modelling of other forces, braking propulsion resistance, curve drag and grade forces are also discussed. As extensions to conventional longitudinal train dynamics, lateral forces and coupler impacts are examined in regards to interaction with wagon lateral and vertical dynamics. Various applications of longitudinal train dynamics are then presented. As an alternative to the tradition single wagon mass approach to longitudinal train dynamics, an example incorporating fully detailed wagon dynamics is presented for a crash analysis problem. Further applications of starting traction, air braking, distributed power, energy analysis and tippler operation are also presented.