智能船舶集成设计技术

针对符合CCS《智能船舶规范》入级符号的船舶设计开发,研究分析智能船舶集成设计技术的设计思想、设计要素、设计框架和关键技术,设计目标船解决方案,并讨论了未来需要突破技术方向。     

船型参数对骑浪/横甩薄弱性衡准影响研究

骑浪/横甩是IMO船舶第二代完整稳性的五种失效模式之一,是一种基于概率的稳性衡准,制定规范的目的是更有效地保障船舶在实海域中的航行安全,确保不发生稳性失效情况.本研究中,以IMO有关成员国提出的最新版骑浪/横甩薄弱性衡准草案为基础,基于自主开发的骑浪/横甩薄弱性衡准校核软件,针对围网渔船开展了样船计算和比较分析,研究IMO正在制定的骑浪/横甩薄弱性衡准方法对该类船型的适用情况,分析船型参数对骑浪/横甩薄弱性衡准的影响,为我国参与国际法规制定,提出针对骑浪/横甩薄弱性衡准的提案提供技术支撑和依据.     

Hardware-in-the-loop testbed for evaluating connected vehicle applications

Connected vehicle environment provides the groundwork of future road transportation. Researches in this area are gaining a lot of attention to improve not only traffic mobility and safety, but also vehicles’ fuel consumption and emissions. Energy optimization methods that combine traffic information are proposed, but actual testing in the field proves to be rather challenging largely due to safety and technical issues. In light of this, a Hardware-in-the-Loop-System (HiLS) testbed to evaluate the performance of connected vehicle applications is proposed. A laboratory powertrain research platform, which consists of a real engine, an engine-loading device (hydrostatic dynamometer) and a virtual powertrain model to represent a vehicle, is connected remotely to a microscopic traffic simulator (VISSIM). Vehicle dynamics and road conditions of a target vehicle in the VISSIM simulation are transmitted to the powertrain research platform through the internet, where the power demand can then be calculated. The engine then operates through an engine optimization procedure to minimize fuel consumption, while the dynamometer tracks the desired engine load based on the target vehicle information. Test results show fast data transfer at every 200 ms and good tracking of the optimized engine operating points and the desired vehicle speed. Actual fuel and emissions measurements, which otherwise could not be calculated precisely by fuel and emission maps in simulations, are achieved by the testbed. In addition, VISSIM simulation can be implemented remotely while connected to the powertrain research platform through the internet, allowing easy access to the laboratory setup.     

快速路可变限速与匝道控制协同优化策略

可变限速控制和匝道控制是快速路交通控制的主要手段,本文对两者的协同优化策略进行了研究.借助智能车路协同系统强大的信息感知能力,通过引入微观交通流信息,对经典METANET模型进行了改造,构建了可变限速控制影响下的微观METANET模型,实现了一种新的可变限速控制策略,同时,采用ALINEA算法,对入口匝道进行了优化控制,实现了两者的协同优化.最后,基于实际道路和交通流数据搭建了仿真平台,对微观METANET模型和协同优化策略的有效性进行了验证.仿真结果表明,微观METANET模型具有良好的交通流预测效果,协同优化策略能有效地改善快速路交通流状态.     

How do economies of density in container handling operations affect ships’ time and emissions in port? Evidence from Norwegian container terminals

Efficient port services are prerequisites for competitive and sustainable maritime transports. This paper makes advances in studying the determinants of the time that ships spend in port and the associated emissions to air. We estimate a production model for cargo handling based on a unique dataset containing each port of call at the largest container terminals in Norway in 2014. In turn, we use auxiliary engine emission factors to estimate particulate matter and nitrogen oxide emissions from ships at berth, to determine how the corresponding damage costs of air pollution vary with container throughput, location, and terminal investments. We find that Norwegian container terminals operate under increasing returns to density. Small ships that unload few containers are far from reaping economies of density, leading to high marginal time requirements for container handling and consequently high marginal external costs. From a Pigouvian taxation perspective, port charges should therefore be regressive in the number of containers handled. Moreover, we find that the external costs of maritime transports are severely understated when port operations are ignored. Our model allows determining the marginal productivities of port facilities. Thereby, it is instrumental in designing port charges that are diversified according to the quantity of containers handled and the service quality (i.e., the speed of handling operations). Regarding contextual factors, we find that establishing high-frequent liner services improves the ship working rate, while simultaneous calls at a terminal impede productivity. The type of container (loading/unloading; empty/laden) also appears to influence the duration of ship working.     

基于规范方法的小水线面双体船疲劳强度研究

论文介绍了船舶结构疲劳强度评估基本原理,并对一条2200t级小水线面双体船进行规范法疲劳强度评估。针对小水线面双体船结构特点,采用规范进行疲劳载荷计算；结合全船有限元计算结果进行疲劳部位筛选；采用有限元法提取疲劳部位的热点应力,并计算疲劳部位的累积损伤度。分析计算结果,提出疲劳部位优化方案。     

船舶轴系校中计算中优化算法的应用

本文以常见船舶轴系布置为基础,建立轴系校中计算数学模型,采用智能微群优化算法数值求解该数学模型。并对某3000吨级海监船进行轴系校中计算,结果表明智能微群优化算法求解出的轴系校中参数满足中国船级社相关规定的要求,该方法可以在轴系校中计算中推广使用。     

谈港口国船舶污染物接收设施问题报告的处置

文中探讨了一起国际航行船舶关于港口国船舶污染物接收设施问题报告的调查情况,介绍了此次船舶污染物接收设施问题报告的原因分析及采取的措施,并向接收设施的提供者和使用者给出了优化建议,明确了各有关部门在港口国船舶污染物接收设施履约工作上的重点。     

带扰动观测器的船舶轨迹跟踪自适应动态面滑模控制

针对遭受未知外部环境扰动的三自由度全驱动船舶轨迹跟踪控制问题,设计一种带扰动观测器的自适应动态面滑模控制方法。该方法构造扰动观测器估计未知扰动,并对控制量进行前馈补偿,采用σ修正泄漏项的自适应律估计扰动观测误差的界以提高控制精度,结合动态面技术解决传统反演法的微分爆炸问题,并选取李雅普诺夫函数证明该控制器可保证闭环系统内所有信号的一致最终有界性。基于一艘供给船舶进行仿真试验,结果表明,所设计的控制器输出合理有效且跟踪精度高,在工程实际中具有一定的参考价值。     

Full six degrees of freedom coupled dynamic simulation of ship collision and grounding accidents

By taking advantage of the user-defined load subroutine (loadud) and the user common subroutine (usercomm) in LS-DYNA, the authors proposed a new coupled approach for simultaneously calculating structural damage and the planar 3DOF ship motions in ship collisions. The coupled procedure aimed at predicting the detailed structural damage together with reasonable global ship motions. This paper extends the method to consider the full 6DOF ship motions; thus, ship collision as well as grounding accidents can be properly handled. This method is particularly useful for design purposes because the detailed ship hull profile is not needed.A traditional ship maneuvering model is used for the in-plane surge, sway and yaw degrees of freedom with a series of nondimensional coefficients determined from experiments. It is assumed that the out-of-plane degrees of freedom are not coupled with the in-plane ship motions, and there is no coupling among roll, pitch and heave motions. The implementation is verified through free decay tests, and the obtained natural periods show good agreement with theoretical results.Several collision and grounding cases are simulated in which a supply vessel crashes into rigid plates with different orientations. The effects of the roll motion, the heave and pitch motions and the full 6DOF motions are studied. The results are compared with those from a 6DOF decoupled method. Ship motions through the proposed method compare reasonably well with SIMO results. It is found that several consecutive impacts may occur in the simulation of one collision case due to the periodic motions. This is not taken into account in the decoupled method, which makes this method unconservative.