Numerical simulation of the flow about self-propelling tanker models

A time-marching CFD simulation is performed for self-propelling ships. The flow about the hull is simulated by the finite-volume method, and the propeller action is approximated as a propeller disk for which the solution is given by a simplified propeller model. The interaction of two flow models is treated in a time-marching procedure converging towards the steady self-propelling condition. This method is applied to five tanker models, and detailed comparisons are made between the simulated results and corresponding experimental results. It is shown that the flow field in the self-propelling condition is qualitatively well reproduced in the simulation, and the estimated thrust deduction factors for the five hull forms agree well with measured ones. However, the effective wake factors are underestimated, since the Reynolds number in the simulations differs from that in the experiment.     

装配式公路钢桥承载力的有限元分析

指出装配式公路钢桥设计中所采用的简化计算方法的不足,使用大型有限元软件ANSYS对其受力情况和承载力进行了分析,并与简化计算方法作了对比,得出了一些规律性的结论,对实际应用具有指导意义。     

组合结构力法分析

本文应用集合概念，对组合结构作了形式化描述。通过矩阵分析，导出了力法方程的统一列式。给出了算法实施的流程框图和具体算例。     

B_0-B_0机车转向架直线运行横向轮/轨力和蛇行稳定性的理论研究(上)

本文根据轮/轨蠕滑理论提供了计算和分析B_0—B_0机车转向架直线运行横向轮/轨力的方法,并以SS4型电力机车作为验证实例,理论计算和实际测试的结果相接近。作者采用这种方法对轮/轨力进行可靠的分析,旨在论证我国现有电力机车转向架蛇行稳定性所要求的最佳轮对定位刚度。本文论证结果符合于作者在文献[1]中提出的轮对定位新方案,它可适用于最大运行速度为100km/h的现有SS型电力机车。     

空间复合材料加筋板流固耦合振动分析

本文用结构有限元与流体边界元方法研究了空间复合材料加筋板结构的流固耦合自由振动，推导了用于结构分析的分项插值型复合材料八节点板单元和三节点梁单元，以及用于流场分析的线性边界单元。用修正的RIRZ向量法与波前法相结合的方法求解特征值问题，避免了因附连水质量引起的结构质量矩阵为满阵的内存困难和非对称矩阵方程约化困难。算例表明，附连水质量对复合材料结构的动力特性影响要比各向同性材料严重得多。     

Finite-difference simulation of green water impact on fixed and moving bodies

A numerical method was developed to predict the water impact pressure caused by green water phenomena. The density function method was employed in the framework of a locally refined overlapping grid system. The simple problem of a rectangular body placed in regular waves was considered and the simulation results were compared with tank experiments. Good agreement with experiment was shown for wave–body interactions and for the pressure values at three different positions on the body. The case of a rectangular body with a vertical wall on the deck was also considered and the comparison showed satisfactory agreement. It was demonstrated that this method could be extended to a moving body problem, in which the body was free to undergo heave, pitch, and surge motions.     

总纵强度耦合作用下船体板架振动计算

船体在海上营运时，船体产生中拱状态弯曲和中垂状态弯曲，所以船体板架是处在复杂弯曲状态。以往船体板架振动计算都忽略了这种影响。本文讨论用有限元方法和原理应用于这类计算，推导了板架局部振动的计算方法，给出了计算实例。通过计算表明，本文方法可用于实际，为舰船振动校核计算提供了手段。     

曲线弯梁桥振动理论分析

利用广义坐标法和能量原理推导曲线梁桥的振动控制微分方程,解释曲线梁桥振动理论与直线梁振动理论的异同点,在推导质量矩阵的显式表达式过程中考虑截面扭转中心与截面形心的不一致。随后给出了曲线梁动力分析的有限元方法,并完成了相应电算程序的编制。最后通过实例分析并验证本文所提计算理论和计算方法的正确性。     

《钢结构设计规范》在起重扒杆设计中的应用

在起重船扒杆设计中，现行《船舶及海上设施起重设备规范》没有提供直接强度计算方法，容易导致强度计算缺乏统一标准和审图产生困难。作者认为，《钢结构设计规范》（GB50017）提供的有关计算会式可作为船舶工程中起重扒杆以及其它压弯构件的计算方法。     

转臂轴箱定位节点位置对机车动力学性能影响分析

利用SIMPACK建立某出口2B0机车动力学模型,分析了转臂轴箱定位节点的纵向位置对机车动力学性能的影响.研究表明节点纵向位置对机车横向稳定性有较显著影响,而对机车直线和曲线通过性能影响不大.得出了在动力学模型中,需要把转臂作为一个单独元件考虑,以减小计算误差的结论.