摩托车发动机凸轮测量测点布局优化设计方法

凸轮测量的目的不同,对测点间距的要求也不同;为了最大限度地减少测量工作量,把测量误差控制在允许范围之内,必须按公差要求进行凸轮测点布局;在实际测量中,应把计算出的测点间距间的角度值圆整为整数度;无论是用平面测头还是滚柱测头测量,按本文方法算出的测点间距与测量误差的平方根成正比,而与被测点的曲率半径的平方根成反比。     

基于GA和SVM的水火弯板焰道布置优化方法

水火弯板是目前船舶建造中普遍采用的曲型外板加工方法,由于机理复杂,其加工过程参数确定往往依赖于工人的加工经验,难以实现标准化和规范化。文章提出基于遗传算法(GA)和支持向量机(SVM)的水火弯板焰道布置优化方法,以成形曲面和设计曲面之间的形状误差最小为优化目标,将焰道布置优化问题分解成计算最小形状误差和搜寻最佳匹配位置两个问题,并分别运用嵌套GA和SVM来实现这两个问题的求解。实例验证表明该方法能快速高效确定最优的加热线布置方案。     

滚装甩挂运输牵引车调度优化及作业模式类比分析

针对滚装甩挂运输新船型可“直进直出”条件下的“边装边卸”作业模式，与传统船型“船艉 进出”条件下的“先卸后装”作业模式对比，建立滚装甩挂码头牵引车调度的混合整数规划模型， 并设计遗传算法求解模型。通过对比不同规模算例下CPLEX与所设计遗传算法的实验结果，验证模型的正确性和算法的有效性。结果表明：相较于传统船型“先卸后装”作业模式，新船型“边装边卸”作业模式在运营成本方面可降低约15%；当装卸任务分布密集时，卸船任务靠近船艏运营成本越高，装卸任务分布稀疏时，卸船任务远离船艏运营成本越高；总体而言，“边装边卸”作业模式的运营成本低于“先卸后装”作业模式。研究结论可为“边装边卸”作业模式下的港口滚装甩 挂作业调度提供决策支持。     

Towards data-driven car-following models

Car following models have been studied with many diverse approaches for decades. Nowadays, technological advances have significantly improved our traffic data collection capabilities. Conventional car following models rely on mathematical formulas and are derived from traffic flow theory; a property that often makes them more restrictive. On the other hand, data-driven approaches are more flexible and allow the incorporation of additional information to the model; however, they may not provide as much insight into traffic flow theory as the traditional models. In this research, an innovative methodological framework based on a data-driven approach is proposed for the estimation of car-following models, suitable for incorporation into microscopic traffic simulation models. An existing technique, i.e. locally weighted regression (loess), is defined through an optimization problem and is employed in a novel way. The proposed methodology is demonstrated using data collected from a sequence of instrumented vehicles in Naples, Italy. Gipps’ model, one of the most extensively used car-following models, is calibrated against the same data and used as a reference benchmark. Optimization issues are raised in both cases. The obtained results suggest that data-driven car-following models could be a promising research direction.     

Wheat interchanges in Europe: Transport optimization reduces emissions

Numerous Life Cycle Analysis of bread pointed out that wheat production and transportation have important impacts on the environment. But wheat is grown all around the world and it is not always consumed where it is produced. In this paper an analysis of the wheat movements around Europe is done, taking special attention on the Spanish situation. An optimization of wheat exchanges is done eliminating the import–export overlapping. This optimization entails a reduction of the number of trips by 34% and the CO₂ emissions reduction due to transportation is calculated to be 121.175 tones. Consequently less trips, fewer trucks, less traffic and lower emissions that brings economic, social and environmental benefits.     

Optimal development of alternative fuel station networks considering node capacity restrictions

A potential solution to reduce greenhouse gas (GHG) emissions in the transport sector is the use of alternative fuel vehicles (AFV). As global GHG emission standards have been in place for passenger cars for several years, infrastructure modelling for new AFV is an established topic. However, as the regulatory focus shifts towards heavy-duty vehicles (HDV), the market diffusion of AFV-HDV will increase as will planning the relevant AFV infrastructure for HDV. Existing modelling approaches need to be adapted, because the energy demand per individual refill increases significantly for HDV and there are regulatory as well as technical limitations for alternative fuel station (AFS) capacities at the same time. While the current research takes capacity restrictions for single stations into account, capacity limits for locations (i.e. nodes) – the places where refuelling stations are built such as highway entries, exits or intersections – are not yet considered. We extend existing models in this respect and introduce an optimal development for AFS considering (station) location capacity restrictions. The proposed method is applied to a case study of a potential fuel cell heavy-duty vehicle AFS network. We find that the location capacity limit has a major impact on the number of stations required, station utilization and station portfolio variety.     

基于混沌蚁群算法的最短路径选择研究

如何解决最短路径选择问题一直是城市交通流诱导系统的关键之一.基于群体仿生理论的蚁群算法是解决此问题的一种方法,针对采用蚁群算法进行最短路径选择时易出现的陷入局部最优解问题,引入混沌理论,采用混沌蚁群算法利用混沌初始化进行改善个体质量和利用混沌扰动避免在蚁群算法搜索过程中陷入局部极值,同时降低了蚁群算法的时间复杂度,从而更好的解决了最短路径选择问题.     

积分分离PID控制算法在炉温控制系统中的应用

积分分离PID控制算法是当被控量与设定值偏差较大时,取消积分作用,以提高系统的稳定性,减小系统的偏差,当被控制量接近设定值时,引入积分控制。本文以工业中常用的炉温控制系统为例进行仿真试验分析,验证积分分离PID控制算法的作用。     

C2/C3等级转换设置方案优化探讨

根据列车运行控制系统C2/C3等级转换的相关规范、RBC和ATP设备C2/C3级间转换时的处理过程,对工程实施过程中存在的C2/C3级间转换设置问题进行了分析研究,并提出相应的优化措施。     

地铁架空刚性接触网平面设计软件的优化

当前地铁设计任务的不断增加对接触网辅助设计软件提出更高的要求。介绍架空刚性接触网平面设计软件的优化内容,采用先进的编程语言实现分布式软件架构,对架空刚性接触网平面设计中的底图处理、锚段智能划分、悬挂点智能布置及冲突检测和调整、拉出值自动计算、汇流排和渡线设计、工程量统计及图幅处理等算法进行优化设计。实际应用表明,本软件提高了地铁架空刚性接触网平面设计的成图质量及设计效率,可满足高质、高效的出图需求。