国内外混合动力客车动力总成方案此较研究

简要介绍混合动力客车动力总成方案分类，重点介绍国内、外典型的混合动力客车动力总成方案；通过对国内、外方案动力总成方案的比较，提出推广我国混合动力客车的建议。     

工程机械与电气故障检修方法分析

文章介绍了机械设备发生故障后,电气故障的查找与分析方法,对分析故障原因的状态分析法、图形分析法、单元分析法、回路分析法等方法以及故障点查找的手段和方法进行了分析和阐述,对工程机械常见机械和电气设备故障的检查与排除提供了经验。     

Simulation study on the operating characteristics of a hybrid hydraulic passenger car with a power split transmission

In this paper, a hybrid hydraulic passenger car (HHPC) coupled with a power split continuously variable transmission (P-CVT) is proposed. This P-CVT is capable of splitting the power from the internal combustion engine into mechanical and hydraulic power flows. By adjusting the ratio of the mechanical power to hydraulic power, the P-CVT enables the transmission ratio to be changed continuously. Meanwhile, the P-CVT system can capture the braking energy and store it in the hydraulic accumulator for the next assistant driving. In order to quantitatively investigate the effect of applying P-CVT on improving the fuel economy and operating performance for the HHPC, a numerical simulation is conducted under typical city driving conditions. The simulation results demonstrate that, the P-CVT permits the engine to be run under a more efficient operating range. The total fuel consumption of the HHPC is reduced by 16.4% under the test conditions, compared with that of the original car.     

混合励磁电机的常见结构及原理

阐述了混合励磁电机的基本概念及分类,介绍了混合励磁电机的常见结构及原理。     

曹妃甸通岛路引堤工程地震液化可能性的原位测试判别分析

通过对3孔标准贯入试验和30孔静力触探试验结果的分析,表明以粉细砂吹填而成的曹妃甸通岛路工程在采取了相应的工程措施后,从总体上消除了地震液化的可能性。对用粉细砂填筑工程地震液化可能性的工程改善和判别具有可借鉴的价值。     

ISG hybrid powertrain: a rule-based driver model incorporating look-ahead information

According to European regulations, if the amount of regenerative braking is determined by the travel of the brake pedal, more stringent standards must be applied, otherwise it may adversely affect the existing vehicle safety system. The use of engine or vehicle speed to derive regenerative braking is one way to avoid strict design standards, but this introduces discontinuity in powertrain torque when the driver releases the acceleration pedal or applies the brake pedal. This is shown to cause oscillations in the pedal input and powertrain torque when a conventional driver model is adopted. Look-ahead information, together with other predicted vehicle states, are adopted to control the vehicle speed, in particular, during deceleration, and to improve the driver model so that oscillations can be avoided. The improved driver model makes analysis and validation of the control strategy for an integrated starter generator (ISG) hybrid powertrain possible.     

三种特殊情况6‰下坡道电路设计

针对信号设计工作中所遇到一些具有6‰下坡道的站场,而站场布置较为特殊的情况,介绍如何进行6‰下坡道电路设计的电路处理方法。     

Study on driver model for hybrid truck based on driving simulator experimental results

In this paper, a proposed car-following driver model taking into account some features of both the compensatory and anticipatory model representing the human pedal operation has been verified by driving simulator experiments with several real drivers. The comparison between computer simulations performed by determined model parameters with the experimental results confirm the correctness of this mathematical driver model and identified model parameters. Then the driver model is joined to a hybrid vehicle dynamics model and the moderate car following maneuver simulations with various driver parameters are conducted to investigate influences of driver parameters on vehicle dynamics response and fuel economy. Finally, major driver parameters involved in the longitudinal control of drivers are clarified.     

路网车流径路选择随机相关机会规划模型及其混合遗传算法

研究随机环境下车流径路的选择问题,首先给出路网车流径路方案可靠性的定义,并在此基础上建立随机环境下车流径路选择问题的随机相关机会多目标规划模型。模型考虑了车流具有不同权重的情况,目标为极大化车流径路方案的可靠性及极小化期望总费用。用C＋＋语言编写K短路算法,并在Visual Studio 6.0上基于该算法开发了软件,用于计算网络上任意两点之间的K短路。以该软件计算出的K短路作为节点间的可选径路集,提出一种基于随机模拟的混合遗传算法。算例表明,在不同交叉和变异概率的条件下算法均可在给定进化代数内收敛至相同的最优解,有较强的适应性。     

激光电弧复合焊焊接工艺在邮轮上的应用研究

激光电弧复合焊克服了传统电弧焊和激光焊的缺点,其良好的焊接特性及可控的焊接成本,使其完全满足邮轮上层建筑建造的技术要求,即：焊后上层建筑外板平整、线型流畅和焊缝成形美观等,且焊接成本应在可控范围。由于目前船级社规范以及国内相关标准尚未制定出可执行的激光电弧复合焊焊接工艺认可的技术要求,制约了激光电弧复合焊在我国邮轮建造领域的应用。为了获得科学合理的激光电弧复合焊焊接工艺认可的工艺技术参数,通过焊接工艺试验,就激光电弧复合焊的特性、焊接设备的选配、试验所用的钢板和焊接材料进行了详细介绍;经对焊接工艺试验数据的分析研究,获得并建立了激光电弧复合焊焊接工艺认可所需的最佳可控的焊接工艺技术参数。这些工艺技术参数不仅能帮助船厂顺利完成激光电弧复合焊焊接工艺计划书等焊接工艺文件的编制、焊接工艺试验的实施及其认可,也能为完善规范提供参考,同时还为激光电弧复合焊在我国建造的邮轮上得以顺利实施提供技术支持。