新疆公路三级区划中环境参数的提出

自然环境条件对公路工程的影响，主要体现在路线选取、路基强度和稳定性、路面稳定性和耐久性、公路主要自然病害(包括冻融、翻浆、雪害、风沙害、崩塌、滑坡和地震灾害等)、施工条件和养护运营环境等5个方面，分析自然条件和公路工程的关系，提出公路区划中地质地貌环境参数和水热状况环境参数。阐述了环境参数的提出过程，为新疆公路自然区划三级区的划分提供依据。     

浅谈FAS双中心建设及设备维护

重点分析了西安局集团公司由2K数调主系统组网更新改造为FAS双中心网络的建设方法,并根据日常维护经验,列举了调度台通道故障处理、FASB简易故障判断及计表倒换试验、FASA和FASB系统与MSC之间的业务故障处理等.     

深中通道西人工岛岛形对护面块体稳定性和堤顶越浪的影响

针对深中通道西人工岛特殊岛形,利用物理模型试验手段,验证最不利波浪作用下块体稳定性和堤顶越浪量。结果表明:入射波在内凹的岛壁弧顶迅速形成能量聚集,在岛端部外凸出转角处产生波能释放和漩涡流等复杂不利的波态;凹凸多变岛形也导致护面的扭王字块块体咬合性能减弱,多因素影响致使质量5 t设计护面块体失稳,经多次优化后,岛壁堤身段增加至8 t、端部转角特殊段须增加至14 t方能稳定;岛壁越浪规律为沿波浪入射处至端部转角段逐渐增加。将试验结果与规范公式计算结果、二维水槽断面试验结果进行对比,得到结论:受岛形影响下的稳定质量和越浪均偏大,尤其端部转角凸出的特殊区域,因此设计应给予关注,尽量遵循规范的相关规定,即"轴线向外侧拐,保证夹角大于150°以上"的要求。通过试验也再次验证了三维整体试验在稳定性、越浪量和优化设计方面的必要性。     

压载荷下骨材贯穿孔孔边应力集中模型试验

以船舶双层底结构为研究对象开展模型试验,研究板材中的开孔在承受压力载荷作用下的孔边应力分布情况,分析压力载荷下不同开孔孔型以及不同补强结构对孔边应力分布情况的影响。在此基础上,开展相关仿真分析,将试验结果与有限元仿真结果进行对比,验证有限元仿真的准确性。     

Analysis of cross effect on inherent deformation during the line heating process – Part 1 – Single crossed heating lines

This paper describes the effect of previous heating on inherent deformation by a subsequent heating line, more specifically, the case of two heating lines intersecting (crossing) each other. The paper has been divided into two parts. In the first part, the case of single crossed heating lines is studied in detail. The second part of the paper, discusses the case of more than one crossed heating lines. The novelty of the work lies in revealing the cross effect and how, factors such as, for example, the heating condition and the plate geometry, influence the resulting inherent deformation of crossed heating. In addition, relationships to easily get these influences are provided. The results are suitable for a wide range of heating conditions and plate thickness.     

Estimation of extreme significant wave heights and the associated uncertainties: A case study using NORA10 hindcast data for the Barents Sea

The reliability of an offshore structure is dependent on its response to the extreme wave climate; therefore, an adequate knowledge of the wave climate at a location is a prerequisite during design as well as in marine operations. This study aims to contribute to the knowledge of the extreme wave climate in the Norwegian Sector of the Barents Sea, using wave hindcast datasets from the Norwegian Reanalysis 10 km (NORA10) database for four locations.We have considered three commonly used methods for the estimation of extreme wave heights, that is, the initial distribution method, the peak over threshold method, and the annual maxima method. The parametric bootstrap concept is considered in the estimation of the epistemic uncertainty related to sample size. The estimated 100-year significant wave heights obtained from the three methods differ, and the degree of variability in the estimates varies, depending on the dataset. The epistemic uncertainty due to sample size is wider when considering the annual maxima method.The estimates obtained from the three methods show the importance of considering different methods and their associated uncertainties when estimating extreme wave values for design. While it is difficult to single out the best method among the three, the estimated values give knowledge of the possible range of the extreme significant wave heights at the locations. Generally, the datasets considered in this study suggest that the wave climate is less harsh further north compared to the southern region of the Barents Sea. The datasets do not suggest any temporal trends in the historical significant wave heights at any of the locations.     

中韩船舶油污损害赔偿制度的比较

韩国不论是从地理位置还是经济贸易往来,对于我国是很重要的邻国.由于海上运输的国际性,我国的船东有在该国卷入油污损害赔偿案件的可能,研究其油污损害赔偿制度能够更好的保护我国船东的权益,而且对于我国完善油污民事赔偿立法有一定的借鉴作用.本篇论文比较了中韩油污损害赔偿制度,并对完善我国油污损害赔偿制度提出几点建议.     

乾元公司铁路专用线场站模式探讨

目前,传统的铁路专用线建设模式是铁路专用线自接轨站接轨,通过区间正线引入厂区的建设模式,这种模式的区间正线受地形条件、厂区位置和沿线规划影响较大,这些影响将不可避免地导致铁路专用线建设工程投资的增加,如能根据运输性质考虑缩短区间正线长度,在接轨站旁边设装车作业站,将大大减少专用线工程投资.以乾元公司铁路专用线建设模式为例来研究铁路专用线场站模式,就如何在接轨站旁边设装车作业站,实现接轨站设备与铁路专用线共用进行探讨.     

A proposed vision and vehicle-to-infrastructure communication-based vehicle positioning approach

It is essential to obtain accurate location of vehicles for new applications of Intelligent Transportation Systems. To remedy the defects of present Global Positioning System and vehicle-to-infrastructure (V-I) positioning technology, a new positioning approach based on vision and V-I communication is proposed. This approach aims at lane-level positioning with lower cost than conventional ones. In this approach, the position of the vehicle is represented by its lateral position (the lane number) and longitudinal position (the distance from entrance of the road) in a course coordinate system along the road; the specific lane the vehicle is occupying (the lane number) can be judged using the information of lane lines detected by vision systems; then the distance to the vehicle is obtained by a Road Side Unit (RSU) during the V-I communication; and the longitudinal position is calculated. The error of the approach on typical operating conditions is analyzed, indicating that the new approach can achieve the accuracy of less than 0.31 m for straight road and 0.58 m for typical arc road with ultra-wideband communication and ranging technologies and rational arrangement of RSUs. The feasibility of this approach is presented.     

厦门翔安海底隧道施工防排水设计与施工

简要介绍了厦门翔安海底隧道工程、水文地质特点,重点阐述了该海底隧道施工中洞内防水设计与施工、富水砂层区段防水措施以及采用的各种排水措施,结合工程实践,提出加强初支背后注浆加固、重视抑拱以下结构的防排水设计等建议,对类似工程的设计与施工提供了有益的借鉴。