二维波浪数学模型的验证与应用

根据水深修正的二维非线性Boussinesq方程,建立波浪数学模型,通过模拟单突堤绕射及圆形浅滩折射现象,证明该模型是可行的,在科美纳河口的波浪变形计算中得到应用,效果较好.     

Fault tolerant nonlinear control with applications to an automated transit bus

This paper presents an integrated structure for a passive and active fault tolerant control (FTC) design approach in the framework of a robust nonlinear control technique called Dynamic Surface Control (DSC). As motivated by the automated vehicle application, we consider two categories of possible faults: pre-specified (a priori) and non-specified faults. It is first shown that DSC can be considered as a passive FTC approach in the sense that it gives simultaneous robust stability to a set of nonlinear systems even in the presence of model uncertainties and the pre-specified faults. Then, the non-specified fault is classified depending on the fault’s impact on the closed-loop system and isolatability from a fault detection and diagnosis (FDD) system. If a fault is both intolerable and isolatable, an active FTC approach is taken which includes FDD and controller reconfiguration. More specifically, trajectory reconfiguration is considered to accommodate the actuator fault, i.e., to compensate for the performance loss due to the fault within the framework of a switched hierarchical structure. Finally, the integrated structure for the longitudinal control of an automated transit bus is designed through the proposed method. Simulation results of the fault tolerant controller are shown for both single and multiple multiplicative faults. This controller was implemented on the California PATH transit buses in a demonstration of automated public transportation technology in San Diego, California in August of 2003.     

高速公路面层出现裂缝的原因与预防措施

通过对河北省高速公路路面屡次出现裂缝的现象进行调查分析,并结合秦皇岛市京沈高速公路大修工程的实践,综合分析了路面产生裂缝的主要原因,并提出有效防治裂缝产生的措施和建议.     

沥青混凝土热铺层厚度测量仪设计

针对在公路养护与沥青混凝土路面摊铺过程中,沥青混凝土的厚度控制对施工成本、路面平整度、路面质量及验收结果的影响,设计了一种能够精确测量沥青混凝土热铺层厚度的实用新型厚度测量仪,克服了目前公路工程施工中沥青混凝土热铺层厚度测量技术中的缺点与不足     

天然气爆炸对盾构隧道的作用机制及工后修复

为了使爆炸灾害后的盾构管片得到合理的修复方案,以某地铁盾构施工过程中挖破天然气管道导致爆炸事故为背景,通过介绍爆炸的基本特性、冲击波的传播特点及火焰波的伴生关系,归纳在天然气爆炸过程中,爆炸火焰和冲击波是决定事故危害程度的2个主要因素,同时这些因素中最危险、破坏力最强、破坏区域最大的是冲击波的破坏效应。通过计算隧道内满布天然气时的TNT当量,以及采用拟静力法模拟管片内部的超压分布并计算得到管片的变形,与第三方检测数据中的管片变形指标进行耦合,证明模拟的准确性,为提出合理的区间修复方案提供依据,同时也为类似工程事故的处理和预案提供经验。     

Assessment of the volume of fluid method for free-surface wave flow

This study was concerned with the free-surface wave flow around a surface-piercing foil. The volume of fluid method implemented in a Navier–Stokes computational fluid dynamics code was employed. Three widely used discretization schemes for the volume of fluid method were assessed for a test case that involved general ship waves, spilling breaking waves in front of the leading edge, and bubbly free surfaces in separated regions. A single computational approach was selected for the comparison, and a grid-dependence study was carried out. The computational results were validated against existing experimental data, showing good agreement. The validation results suggest that all three discretization schemes perform well, but the best and most efficient results were obtained using the high-resolution interface capturing scheme.     

Analysis on Ground Surface Deformation and Influence of Construction Parameters Caused by Two Different Shield Machines in Double-tube Tunnelling北大核心CSCD

Based on a shield-driven running tunnel project of Hangzhou Metro Line 2, this paper carries out field measuring of the ground surface deformation caused by two different shield machines in double-tube tunnelling in soft soil areas, obtains the laws of the surface deformation caused by shield-driven double-tube tunnelling and verifies the applicability of the modified Peck formula to double-tube tunnelling. The results show that in soft soil areas the impacts on ground surface deformation caused by different shield construction parameters in the previously and subsequently excavated tunnels are different, while the surface deformation changes sharply before and after the shield machine passing through the cutting face, and a rebound phenomenon occurs when the shield tail passes through the cutting face due to the influence of the grouting; The cutterhead torque of the shield machine in soft soil areas can be composed of five calculation factors, and the calculation results are in good agreement with the measured values. The larger the opening rate of the shield cutterhead is, the larger the average torque value will be, the higher the percentage of large ground loss rate will be, and the larger the maximum ground surface settlement will be; The ratio of cutterhead torque T to mucking volume per ring Q is used as the control parameter for analyzing the ground surface settlement, and a certain positive correlation between the ratio and the surface settlement value is determined, the smaller the cutterhead opening rate is, the more accurate the fitting results will be. © 2022, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

路网环境下考虑大型车混入率的事故疏散诱导模型

大型车的混入对高速公路交通流产生了较大的影响，尤其是在交通事故情景下。为了引导事故条件下驾驶人和组织者做出高效准确的决断，将考虑了大型车混入率的动态空间占有率模型引入到交通波模型，构建干涉与非干涉情景下的交通事故影响模型。以郑尧高速为例，对模型的准确性和可行性进行了验证，分别对干涉情景下的疏散时间、疏散量以及事故发生的位置，车辆数等指标与事故影响程度的指标（包含事故最远排队长度，事故持续时间）关系进行分析。研究结果表明：疏散时间与事故影响程度成正相关关系，疏散量与事故影响程度成负相关关系，而事故发生点与上游匝道之间的距离与其关系不大；道路服务水平为0.456，车辆数为1 321 veh·h^-1时，为了使得分合流区不受影响，在不采取任何措施的情景下，应将大型车混入率控制在50.1%以下，使得最远排队长度在10 km内；当大型车混入率大于58%时，将很难通过干涉引导避免对上游分合流区产生影响；在35 min以内采取干涉措施的效果最为明显，而大于35 min时，事故持续时间会发生一个急剧的增加，不利于路网恢复，之后事故恢复时间将趋于平稳；对道路交通量进行模拟可知交通量每增加50 veh，疏散时间和距离增加的范围为[1.5 min，3.6 min]和[1.209 km，1.543 km]。研究结果可为高速公路事故诱导策略制定和疏散效果提升提供参考。     

隧道下穿运营机场跑道的爆破振动安全判据研究

以我国第一座采用钻爆法下穿运营机场跑道的隧道恩施金凤大道许家坪隧道工程为依托,开展对机场跑道的爆破动力安全判据的研究。首先基于应力波传播理论及极限拉应力准则,对爆炸应力波传播至机场跑道上表面(即自由面)处发生的反射进行理论分析,建立基于混凝土跑道结构安全的爆破振动速度判据模型,并提出跑道的爆破振动速度安全阈值;同时,基于数值模拟,从统计角度建立拉应力峰值与质点振动速度峰值之间的函数关系,求解得到机场跑道的爆破振动速度安全阈值。最后,将理论分析结果、数值计算分析与《爆破安全规程》进行对比分析,最终确定机场跑道的爆破振动速度安全判据,为在隧道下穿机场跑道爆破施工提供了依据。