跃龙门隧道多功能钢拱架安装机快速施工配套技术

隧道施工机械化是我国隧道施工的发展方向。相较于开挖、衬砌机械化的快速发展,钢拱架安装机械化水平存在不足,长期以来较多采用人工作业,施工人员多、劳动强度大、施工效率及安装精度低,同时存在很大的安全隐患。本文通过跃龙门隧道机械化配置配套应用,分析了钢拱架安装机在机械化快速施工体系中的关键作用,并详细介绍了XZGMT411多功能钢拱架安装机相关参数、施工操作要点及注意事项。多功能钢拱架安装机的使用大幅提高了隧道施工效率及施工质量,缩短了施工工期。     

A design method of tensile triangles and low transformation temperature weld metal for reduction of stress concentration and residual stress of welded joints

Stress concentration and residual stress have a significant influence on fatigue life of welded joints. In order to reduce the stress concentration of welded joints, a mathematical design method of tensile triangles (MTT) based on bionics was applied to weld shape design. Accordingly, the stress concentration of various weld beads in the corner boxing welded joint and the fillet welded T-joint was dissected using our in-house FEM software JWRIAN. It was found that there existed a large stress concentration in the conventional welded joints, whereas those welded joints with elongated weld bead were accompanied by a lower stress concentration, especially for elongated weld bead with MTT design. Furthermore, among the weld shapes of the corner boxing fillet welded joint, the rectangle shape of weld bead had the minimum stress concentration factor (1.05). For the fillet welded T-joint with MTT design, the stress concentration of weld toe decreased dramatically with the increase of the index of designed shape, but there was a minor difference of stress concentration at weld root between the weld beads with MTT design. In addition, application of low transformation temperature (LTT) weld metal utilizing martensitic transformation to the fillet welded T-joints can produce compressive residual stress at weld toe.     

舰船加筋板局部强度评估中的总纵应力折减系数研究

舰船加强筋尺寸的合理确定一直是结构设计中的热点问题。本文综合考虑总纵弯曲应力和局部载荷的相互作用,研究加强筋的许用应力折减系数(C_s)的影响因素与合理取值方法。通过分析加强筋的力学模型、对比不同规范中的C_s取值,以及用非线性有限元软件Abaqus计算一系列加筋板模型,拟合C_s曲线并与规范对比,并验证剖面对称性和局部载荷作用方向对C_s取值的影响方式,丰富了舰船局部强度校核方法的技术背景,为板架设计、舰船三维局部校核程序开发提供借鉴。     

基于概率密度演化的斜拉索多级变幅时变疲劳可靠度分析

拉索是斜拉桥的主要受力构件,在车辆、风等交变荷载作用下易发生多级变幅疲劳损伤,而经典可靠度方法预测多级变幅时变疲劳可靠度难度大且计算效率低。针对这一问题,提出一种高效的多级变幅斜拉索时变疲劳可靠度预测方法。基于Miner累积损伤理论,建立同时考虑荷载和材料随机性的变幅疲劳损伤概率演化模型;构建应力幅出现频率指标,解决多级变幅疲劳损伤演化过程中偏微分方程难以确定问题,通过概率密度演化方法精确计算多级变幅时变疲劳可靠度,并采用五级变幅材料试验数据和某桥梁斜拉索的模拟数据验证所提方法的可行性。结果表明:所提方法的计算效率远高于蒙特卡洛方法;在小概率失效时,其计算精度高于蒙特卡洛方法。     

25t轴重荷载作用下隧底脱空区域受力特性分析

为了研究在役铁路隧道在通车之后隧底脱空病害的问题,采用有限元理论,建立隧道脱空区域在围岩压力与25 t轴重列车动载作用下的数值计算模型,主要研究80 cm与40 cm脱空宽度分别距隧道中心线0,80 cm与160 cm时脱空区域的受力特性。结果表明:在围岩压力下,脱空区域中线上壁和外侧顶角混凝土中产生拉应力及内侧顶角中产生压应力,其中压应力对脱空的宽度更为敏感;同时施加列车动载作用时,脱空区域上壁出现了竖向动应力与横向拉应力,得到了脱空区域力学指标的最大响应值及其出现的具体位置,宽度的增加对脱空区上壁横向拉应力更为显著,上壁横向拉应力增幅超过200%,竖向动应力增幅达50%。因此,隧底脱空区周围应力分布复杂,拉应力与压应力在脱空区域同时存在,应力突变严重,对脱空现象应及时组织处理。     

含碎石化层的沥青加铺路面结构分析

利用ABAQUS有限元软件建立了含碎石化层的沥青加铺路面结构模型,研究土基、旧路基层与碎石化层模量以及碎石化层和加铺层厚度对含碎石化层沥青加铺层路面结构的力学响应的影响,确定碎石化模量的控制范围.结果表明,荷载作用中心点及附近一定区域,沥青加铺层层底受拉;沥青加铺层层底拉应力对土基模量、旧路基层模量、碎石化层厚度不敏感,但当碎石化层模量较小(接近300MPa)或加铺层厚(大于20cm)时层底拉应力均较大,在重载作用下更大.因此碎石化道路必须验算沥青层层底拉应力指标.为使沥青层层底拉应力峰值不至于过大甚至超过容许拉应力,使得受拉区域控制在一定范围以内,同时为降低加铺层竖向剪应力及土基顶面压应变,并达到防治反射裂缝的效果,碎石化层的模量宜控制在500～1000MPa.     

Analysis of cross effect on inherent deformation during the line heating process – Part 1 – Single crossed heating lines

This paper describes the effect of previous heating on inherent deformation by a subsequent heating line, more specifically, the case of two heating lines intersecting (crossing) each other. The paper has been divided into two parts. In the first part, the case of single crossed heating lines is studied in detail. The second part of the paper, discusses the case of more than one crossed heating lines. The novelty of the work lies in revealing the cross effect and how, factors such as, for example, the heating condition and the plate geometry, influence the resulting inherent deformation of crossed heating. In addition, relationships to easily get these influences are provided. The results are suitable for a wide range of heating conditions and plate thickness.     

横梁端部节点优化

通过有限元计算,对比几种常见的横梁端部连接方式,综合考虑结构整体强度、钢材使用量、舱室空间利用率、施工便利性等方面的影响因素,确定较优的连接过渡方式和过渡结构的参数尺寸,为船舶设计横梁端部节点形式的确定提供参考。     

单侧边载作用下黏土中单桩负摩阻力特性模型试验研究

桩基础边载作用会在桩周产生负摩阻力,进而危及软土地区高桩码头、人工岛、路基等工程的安全。通过开展黏土中单侧堆载作用下单桩室内模型试验,测定桩身应变、桩顶沉降和水平位移,研究边载作用距离和桩型对桩身轴力及弯矩的影响,探讨桩身负摩阻力、桩顶沉降和水平位移在黏土固结过程中的时间效应。结果表明:边载作用距离对桩身最大轴力和最大弯矩有较大影响;翼板桩会增加桩身最大轴力和最大弯矩;负摩阻力和有效应力系数随时间增长且增速趋缓;增加边载作用距离和添加翼板都会提升桩身中性点位置,在这两组试验中均提升了8.33%。     

PHC桩损伤处应力释放与水平受力影响分析

基于大型有限元软件ANSYS建立单桩有限元模型,以某5万DWT高桩码头为例,计算分析PHC桩在桩基完整性检测割桩处的应力释放以及损伤对水平承载的影响。结果表明:PHC桩在割桩损伤处应力释放明显,损伤区域应力变化剧烈,损伤处应力变化规律和应力集中系数与桩的预应力水平无关;水平荷载作用时PHC桩的预应力对于提高损伤桩的抗裂效果明显,损伤处受应力集中影响,预应力水平越高损伤处应力变化越大,而且最不利应力位置也下移到损伤平台内侧处。