城轨通信网的可靠性设计

城轨通信网对可靠性的要求越来越高,通过对系统的网络各层次的可靠性分析,提出解决城轨通信网可靠性设计的方法。     

轨道交通供电系统功率因数分析及补偿方案研究

研究目的:近年来我国轨道交通建设事业迅猛发展,但功率因数问题一直是困扰轨道交通供电系统的重要问题,常常导致电力部门的高额罚款。为提高功率因数,需对无功补偿方案进行研究。在分析国内城市轨道交通供电系统无功补偿现状的基础上,通过对整个供电系统综合功率因数的分析计算,研究几种无功补偿方案,并最终确定一种新的综合无功补偿方案。研究结论:城市轨道交通线路的无功补偿方案应根据自身供电系统的实际情况,并通过综合功率因数分析计算或实测分析,来综合考虑采用高压、低压侧相结合的无功补偿方案;在条件允许时,建议采用主所设SVG+各车站变电所0.4 kV侧设APF的综合补偿方案。     

高雄捷运红橘线安全管理系统

讨论轨道交通系统的安全问题。在规划台湾高雄捷运红橘线时,就已考虑在整个生命周期内建立安全管理系统,符合EN50126的标准;在制定兴建运营合约时,就要求在高雄捷运红橘线兴建及运营期间必须实行安全管理,并且在合约内制定安全风险标准(包括可忍受及不可忍受的安全风险水平、执行安全管理过程所需程序等),以确保风险降为"低到合理且实际可行"的情况。重点介绍安全管理系统中的安全管理过程,包括危害辨识、危害分析、风险分析与评估、风险处理等过程,并说明高雄捷运红橘线的安全管理过程。     

混合动力--未来城市公交的明星动力

本文阐述了目前国内外混合动力总成常用的几种方案,介绍了一种适合康明斯发动机的混合动力方案,展望了该动力总成的开发前景。     

城市公交客车发展趋势

本文从未来十年城市社会经济和文化发展的角度分析了公交客车发展的趋势:即动力设计环保化、形体设计大型化、技术配置多样化、性能选择人本化、信息沟通智能化、外观设计艺术化、操作系统自动化、应急设置可靠化、总成寿命同步缩短化、车身结构轻型化。     

CM模式在我国城市轨道交通项目管理中的应用

为探索城市轨道交通建设项目管理模式,本文在揭示了目前城市轨道工程特点及存在主要矛盾的基础上,介绍了新型CM建设管理模式的特征和优点;分析了在我国城市轨道交通建设领域采用CM模式的必要性和可行性,提出了推行CM模式的相应方案和步骤。     

Mathematically calculating the transit time of cargo through a liner shipping network with various trans-shipment policies

This paper derives the mathematical expressions for the transit time of cargo through a liner shipping network. Main efforts are devoted to deriving the calculation expressions of the connection time of cargo during trans-shipment. For the forward and many-to-one trans-shipment policies, we conduct a minor correction towards the expressions in existing studies to improve the completeness. Meanwhile, we propose an alternative but more straightforward calculation method for connection time which bypasses the complicated inductive argument in existing studies. Then we introduce two new trans-shipment policies: backward trans-shipment and one-to-many trans-shipment, and mathematically calculate the corresponding connection times. Numerical experiments also deliver some managerial insights into the effectiveness of backward trans-shipment in transit time control.     

Experimental evaluation of Heavy Duty Vehicle speed patterns in urban and port areas and estimation of their fuel consumption and exhaust emissions

Exhaust emissions and fuel consumption of Heavy Duty Vehicles (HDVs) in urban and port areas were evaluated through a dedicated investigation. The HDV fleet composition and traffic driving from highways to the maritime port of Genoa and crossing the city were analysed. Typical urban trips linking highway exits to port gates and HDV mission profiles within the port area were defined. A validation was performed through on-board instrumentation to record HDV instantaneous speeds in urban and port zones. A statistical procedure enabled the building-up of representative speed patterns. High contrasts and specific driving conditions were observed in the port area. Representative speed profiles were then used to simulate fuel consumption and emissions for HDVs, using the Passenger car and Heavy duty Emission Model (PHEM). Complementary estimations were derived from Copert and HBEFA methodologies, allowing the comparison of different calculation approaches and scales. Finally, PHEM was implemented to assess the performances of EGR or SCR systems for NO_X reduction in urban driving and at very low speeds.The method and results of the investigation are presented. Fuel consumption and pollutant emission estimation through different methodologies are discussed, as well as the necessity of characterizing very local driving conditions for appropriate assessment.     

Hierarchal assessment of noise pollution in urban areas – A case study

Noise pollution in urban areas has many harmful effects on the citizens. There are varieties of noise generation sources of which the traffic noise could be a major source. The point which is perhaps less noticed is that sound level is not the only parameter to indicate the extent and intensity of noise pollution. Situation of urban land uses, distribution of population centers and types of passages can deeply affect the concern on this environmental issue but not with a similar ratio. This article presents an overlaying technique to define noise prone areas using all different factors involved. A case study was carried out in the District 14 of Tehran Metropolitan City where there are busy streets and highways. For this purpose, the share of each criterion in noise pollution intensity was determined using Analytical Hierarchy Process (AHP). Afterwards, the map layers were overlaid based upon the relative importance of the criteria to get the final map on which the noise prone areas are specified. The developed method could be used as a tool for indirect estimation of noise pollution by which instead of direct measurement of the equivalent sound level, it would be possible to predict noise susceptible areas considering the most important influential factors.     

Analytical and simulation approaches to understand combined effects of transit signal priority and road-space priority measures

Transit signal priority (TSP) may be combined with road-space priority (RSP) measures to increase its effectiveness. Previous studies have investigated the combination of TSP and RSP measures, such as TSP with dedicated bus lanes (DBLs) and TSP with queue jump lanes (QJLs). However, in these studies, combined effects are usually not compared with separate effects of each measure. In addition, there is no comprehensive study dedicated to understanding combined effects of TSP and RSP measures. It remains unclear whether combining TSP and RSP measures creates an additive effect where the combined effect of TSP and RSP measures is equal to the sum of their separate effects. The existence of such an additive effect would suggest considerable benefits from combining TSP and RSP measures. This paper explores combined effects of TSP and RSP measures, including TSP with DBLs and TSP with QJLs. Analytical results based on time-space diagrams indicate that at an intersection level, the combined effect on bus delay savings is smaller than the additive effect if there is no nearside bus stop and the traffic condition in the base case is under-saturated or near-saturated. With a near-side bus stop, the combined effect on bus delay savings at an intersection level can be better than the additive effect (or over-additive effect), depending on dwell time, distance from the bus stop to the stop line, traffic demand, and cycle length. In addition, analytical results suggest that at an arterial level, the combined effect on bus delay savings can be the over-additive effect with suitable signal offsets. These results are confirmed by a micro-simulation case study. Combined effects on arterial and side-street traffic delays are also discussed.