单斜岩质地层重式挡墙抗滑移合理性设计

基于西南山地较为常见的单斜岩质地层上修建重力式挡墙的情况,通过对水平基底、倾斜基底、锚杆基础、台阶基础、加大埋置深度、台阶和锚杆联合基础六种基础处理方式进行经济技术对比,分析各种方案的优缺点,提出了合理化的基础抗滑移设计方案.     

基于桥梁单元刚度损伤识别的新型间接量测方法研究

基于移动车辆在桥梁上运行来测试桥梁基频的间接量测法已经获得实桥的验证，提出一种新型间接量测法，该方法有别于牵引车拖动测试车辆一直运行并同步采集信号的传统间接量测方式，需牵引车同时拖动固定间距的前、后2辆测试车辆前行，并在固定点静止采集少许时间后，继续重复操作至测试车辆通行整跨桥梁，利用测试车辆上采集的信号，计算整跨桥梁的传递率矩阵，然后利用奇异值分解识别出桥梁的第1阶模态，进而利用改进的直接刚度法计算桥梁单元弯曲刚度，并进行损伤识别。首先从理论上说明该方法的可行性，然后在各类影响因素下进行数值模拟分析，最后通过某实桥试验进行初步验证。研究结果表明：相比于常规在桥梁上直接测试的方法，提出方法耗时短，机动性好，适用于大面积大区域桥梁集群快速测试；相比于传统间接量测方式，提出方法通行时间虽有少量增加，但能较好解决桥梁阻尼比、测试车阻尼、外激励变化、噪音、桥面粗糙度等传统间接量测方法中存在的问题。     

A note on the use of correlation coefficients for assessing goodness-of-fit in spatial interaction models

The use of correlation coefficients to evaluate the accuracy of spatial interaction models is inappropriate unless such models have been fitted using least squares techniques. In other cases the correlation involves an implicit intercept value and a regression coefficient that may significantly modify the interaction model's estimates. Researchers have not acknowledged the role of these two parameters when the correlation is used. A generalized root mean square error is proposed as an alternative indicator of accuracy that may be used with any model.     

The dynamic response of rail support

This research reviews principles behind the dynamic response of rail supports, and introduces a method of analysis to find the maximum response in a realistic setting. Assuming a time-dependent, moving mass with massive wheels is essential, because the ratio of the moving mass to the rail mass is significant. However, the dynamic response of the track is not affected by dynamic properties of the train other than its unsprung mass, because the natural frequencies of the train suspension and track are significantly different. A numerical method is developed to model the dynamic response based on these principles, and applied to the Korean urban transit. The dynamic response includes multiple peaks with a large amplitude range, creating noise while the wheel passes the support. The dynamic impact factor (DIF) for the rail support depends mainly on the stiffness and damping of the rail support. The DIF for the rail moment is below the code value, whether this value is based on numerical analysis or on-site measurements. However, our numerical analysis results in a DIF for support settlement that is greater than the code value, if the damping is less than 3%.     

Flexural gravity wave generation by initial disturbances in the presence of current

The effect of uniform current on the generation of flexural gravity waves resulting from initial disturbances at a point was analyzed in two dimensions. The problem was formulated as an initial boundary value problem under the assumptions of the linearized theory of water waves. By direct application of the Laplace transform and then the Fourier transform, explicit expressions for the velocity potential and free surface elevation were obtained in integral forms; these were evaluated asymptotically for large distances and times by the application of the method of the stationary phase to obtain the far field behavior of the surface elevations in specific cases. Simple numerical computations were performed to illustrate the effect of uniform current on the surface elevation, wavelength, phase velocity, and group velocity of the flexural gravity waves and on the far field behavior of the progressive waves in two different cases, namely, when there is an initial depression concentrated at the origin and an initial impulse concentrated at the origin.     

铁路大跨度连续梁拱组合桥结构参数研究

为了解结构设计参数对铁路大跨度连续梁-拱组合桥受力特性的影响,进而对今后同类桥梁设计提供引导作用,以兰渝线广元嘉陵江特大桥为工程背景,研究矢跨比、拱轴线形状、拱梁刚度比这3个设计参数对桥梁结构力学特性的影响。分析结果表明:矢跨比对拱肋轴力和拱脚、主梁中跨弯矩影响显著,取值在1/4~1/5时较为合理;1.6次抛物线、2.4次抛物线及圆弧线作为拱轴线时,拱脚截面弯矩过大,2次抛物线或悬链线作为此类桥型的拱轴线较为合理;拱梁刚度比对结构轴力影响较小,对拱肋弯矩影响较大,随拱梁刚度比的增大,拱肋分担的弯矩显著提高。     

提速车辆转向架橡胶球铰刚度分析

根据提速客车转向架橡胶球铰的结构特点，结合橡胶的本构模型及相关系数，利用ABAQUS软件对其径向刚度、轴向刚度、偏转刚度和扭转刚度进行了分析，并将计算结果和试验结果进行了比较。结果表明：计算结果和试验结果具有较好的一致性，利用有限元分析能指导橡胶球铰及同类产品的结构设计。     

由圆环板正交连接的双层变厚度带肋圆柱壳整体结构矩阵分析

利用圆环板与内、外圆柱壳正交连接的变形协调条件，把每跨双层壳作为整体，建立双层 圆柱壳段的平衡方程，并叠加环肋骨、中间支骨、纵筋的刚度。运用相关矩阵分析手段和相邻 壳段的连续条件，将壳段平衡方程组集成待定参数的总体方程。该方法可以准确求解双层圆 柱壳结构任何部位、构件的挠度和应力     

改进型保温挠性软管在某重型卡车上的应用

某国六重型卡车排气系统应用单层波纹管+伸缩管的保温软管结构,该结构在整车可靠性试验过程中,两款车型多次出现波纹管断裂问题。经对其结构分析,知现用保温挠性软管刚度过小,在整车运行过程中会发生运动失稳引起波纹管断裂,同时挠性软管两端应力集中引起端边波纹断裂,且波纹管波峰圆角过小(近似尖波)易造成波纹管断裂,故开发改进型保温挠性软管,即双层波纹管(大圆角)、变刚度结构,优化现用保温挠性软管结构,解决波纹管断裂问题。     

结构振动模型和刚度矩阵对地震响应影响研究

对平面钢框架算例模型分别采用质点系、双翼鱼刺型和杆系振动模型输入天然和人工地震波进行地震响应时程分析.在分析中,与质点系振动模型相关的结构侧移刚度矩阵由反弯点法、D值法、非线性静力分析法以及柔度法确定;与双翼鱼刺型振动模型相关的结构侧移刚度矩阵由双鱼刺法确定;与杆系振动模型相关的结构侧移刚度矩阵由矩阵位移法确定.通过算例讨论了采用上述不同方法确定的结构侧移刚度对结构地震响应影响.