Casualty analysis of large tankers

This article presents detailed results of a comprehensive analysis of recorded accidents of large oil tankers (deadweight greater than 80 000 tonnes) occurring between 1978 and 2003. The analysis encompasses a thorough review of available raw accident data and their postprocessing in a way to produce appropriate statistics useful for the implementation of risk-based assessment methodologies. The processing of the captured data led to the identification of significant qualitative historical trends of tanker accidents and of quantitative characteristics of large tanker accidents, such as overall accident rates per ship-year. Data were also analyzed for all major accident categories separately, taking into account tanker ship size/type, the degree of accident severity, and the oil spill tonne rates per ship-year; this led to the identification of heavily polluted worldwide geographical areas as a result of large tanker accidents.     

河流突发性污染事故风险评价方法的探讨

通过危险源和环境因素两个方面进行河流突发性污染事故风险评价,引入加权危险河段长度和河段危害权重两个概念论述危险源风险评价,给出能够反映各河段重要性的新的危险源风险评价方法。评价了流速、降水、地形等自然环境因素对突发性水污染事故发展的影响,提出了环境因素定性评价方法。     

重油燃烧废气污染治理的研究

重油燃烧产生大气污染。针对重油燃烧的机理分析污染原因，并在生产现场进行试验和监测，提出控制烟气污染的有效途径。结果表明排烟黑度在３～５ｍｉｎ降到林格曼１级以下，正常燃烧过程中排烟黑度均达到排放标准。     

绝缘子污秽度在线监测的研究

本文介绍了一种通过测量脉冲式泄漏电流的频度和幅值来进行绝缘子污秽度在线监测的方法,提出了有源、无源两种解决方案,并阐述了运行使用中出现和应注意的问题。     

船舶压载水污染的控制和管理

压载水对现代船舶的安全航行是绝对必要的，但它对生态、经济和人类健康构成了严重威胁，排放船舶压载水被全球环境基金组织确认为危害海洋的四大威胁之一.为防止压载水带来的生物污染，除了在深海更换压载水外，IMO还提出了将来可能采用的一些方法，分析不同处理方法的经济性。     

Analysis process of a steering system using a concept model for idle vibration

This paper describes the development of an optimal design process for a steering column system and supporting system. A design guide is proposed at the initial concept stage of the development process to obtain sufficient stiffness of the steering system while reducing the idle vibration sensitivity of the system. Case studies on resonance isolation are summarized, where vibration modes among the systems are separated by applying a vibration mode map at the initial stage of the design process. This study also provides design guidelines for an optimal dynamic damper system using a CAE (computer aided engineering) analysis. The damper FE (finite element) model is added to the vehicle model to analyze the relation between the frequency and the sensitivity of the steering column system. This analysis methodology makes it possible to achieve target performance in the early design stage and reduction of damper tuning activity after the proto car test stage. Through the proposed steering column system development process, a lightweight vehicle with high stiffness is possible prior to the proto build stage. Furthermore, the improved process is expected to contribute to reducing the overall development period and the number of proto car tests necessary to achieve the desired steering system performance.     

Modeling NOx and NO2 emissions from mobile sources: A case study for Hamilton, Ontario, Canada

This study characterizes the dispersion of emissions of oxides of nitrogen and nitrogen dioxide from traffic sources in the Hamilton census metropolitan area. The Integrated Model of Urban Landuse and Transportation for Environmental Analysis software was used to estimate emissions of oxides of nitrogen from traffic sources. The Air Pollution Model, was used to simulate dispersion of the traffic emissions over the city. The models account for the two primary wind directions in this region – the prevailing southwest and a secondary northeast direction. The results show a prominent triangle of high pollution defined by major roads and highways along the periphery of the Hamilton Harbour, at peak-hour. With southwest winds, residential areas along the northern shoreline of the Harbour are affected, while the western sections of the city are affected by northeast winds. High concentrations are persistent in some areas, for both wind directions. The resulting dispersion surfaces characterize the spatial distribution of traffic emissions and thus provide a means of assessing population exposure over the Hamilton area.     

公路建设环境保护与绿色施工

对公路建设施工造成的环境污染及其危害性进行了分析,提出切实可行的文明施工、防止污染、新科技环保等综合措施,坚持可持续发展的科学发展观,发展文明施工、绿色施工。     

柴油机DOC辅助DPF再生燃油喷射规律的优化

为了有效降低柴油机颗粒捕集器(DPF)再生过程产生的二次污染物,优化了催化氧化反应器(DOC)辅助DPF再生的燃油喷射规律。采用AMESim建立了DOC和DPF模型,在Simulink中建立了发动机排放和DPF再生控制模型,将两个软件耦合搭建联合仿真平台。对模型进行了验证,提出了先缓后急的燃油喷射规律。结果表明:660是较为理想的DPF再生温度,优化后的燃油喷射规律能够大幅降低DPF再生的二次污染。     

沈局重点工业污染源确定原则和评价方法的探讨

根据沈局污染源管理的需要,对沈局污染源进行了重新评价,制定了确定重点工业污染源的3项原则:依量原则;依害原则;依位原则.遵循3项原则,我们选择了新的污染源评价方法,即对等标污染负荷法进行了加权处理.处理后的评价方法能够较为全面地反映污染源的潜在污染能力,是确定重点工业污染源的直接依据.