Does the income elasticity of road traffic depend on the source of income?

An extensive body of literature addresses the income elasticity of road traffic, in which income is typically treated as a homogenous quantity. Here we report evidence of heterogeneity in cross-sectional estimates of the elasticity of vehicle-kilometres of travel (VKT) with respect to income, when household income is disaggregated on the basis of income source.The results are generally intuitive, and show that the cross-sectional income elasticity of road traffic is not homogeneous as is typically specified in transport planning models. We show that in a number of circumstances the cross-sectional elasticity with respect to aggregate household income is of the opposite sign in comparison to more refined estimates of elasticity disaggregated by income source. If further research confirms that the elasticities we report here are causal in nature, neglecting the elemental effects could result in misleading results affecting practical infrastructure-investment and policy decisions, particularly as the mix of income sources shifts (e.g. if, as society ages, pension income increases as a share of all income).These results are of interest to both researchers and forecasters of travel demand, as well as designers of future travel survey instruments; the latter group must decide how to generate data about respondents’ income. Current expert guidance is to collect a single estimate of aggregate income at the household level. Future travel survey design choices will bound the analyses that can be supported by the resulting survey data, and therefore methodological research to re-visit the trade-offs associated with such choices is warranted.     

Influence of priority taking and abstaining at single-lane roundabouts using cellular automata

Existing roundabout simulation models fail to consider all types of driver behavior which compromises their accuracy and ability to accurately evaluate roundabout performance. Further, these non-compliant driver behaviors, including priority taking and priority abstaining, are inconsistent with existing traffic flow theories. In this paper, a new cellular automata model, C.A.Rsim, is developed and calibrated with field data from five single-lane roundabouts in four northeastern states. Model results indicate that approximately 20% of the individuals in the driver population are inclined to priority taking and approximately 20% are inclined to priority abstaining behavior, though the observed levels of these types of behavior are naturally lower and vary with traffic volume. The model results also corroborate other research indicating that current models can overestimate capacity at higher circulating volumes, possibly a result of the jamming effect produced by priority taking behavior. The reduction in priority abstaining behavior, which is observed at older roundabouts, significantly reduces delay and queue length in certain traffic volumes. C.A.Rsim is also more parsimonious than many existing microsimulation models. These results provide insight on how variations in conflicting flow (i.e., traffic volume and turning movement balance) impact the amount of observed non-compliant behavior.     

Incorporating Driver Behaviors in Network Design Problems: Challenges and Opportunities

The goal of a network design problem (NDP) is to make optimal decisions to achieve a certain objective such as minimizing total travel time or maximizing tolls collected in the network. A critical component to NDP is how travelers make their route choices. Researchers in transportation have adopted human decision theories to describe more accurate route choice behaviors. In this paper, we review the NDP with various route choice models: the random utility model (RUM), random regret-minimization (RRM) model, bounded rationality (BR), cumulative prospect theory (CPT), the fuzzy logic model (FLM) and dynamic learning models. Moreover, we identify challenges in applying behavioral route choice models to NDP and opportunities for future research.     

Roads in transition: Integrated modeling of a manufacturer-traveler-infrastructure system in a mixed autonomous/human driving environment

This paper develops an integrated model to characterize the market penetration of autonomous vehicles (AVs) in urban transportation networks. The model explicitly accounts for the interplay among the AV manufacturer, travelers with heterogeneous values of travel time (VOTT), and road infrastructure capacity. By making in-vehicle time use more leisurely or productive, AVs reduce travelers’ VOTT. In addition, AVs can move closer together than human-driven vehicles because of shorter safe reaction time, which leads to increased road capacity. On the other hand, the use of AV technologies means added manufacturing cost and higher price. Thus, traveler adoption of AVs will trade VOTT savings with additional out-of-pocket cost. The model is structured as a leader (AV manufacturer)-follower (traveler) game. Given the cost of producing AVs, the AV manufacturer sets AV price to maximize profit while anticipating AV market penetration. Given an AV price, the vehicle and routing choice of heterogeneous travelers are modeled by combining a multinomial logit model with multi-modal multi-class user equilibrium (UE). The overall problem is formulated as a mathematical program with complementarity constraints (MPCC), which is challenging to solve. We propose a solution approach based on piecewise linearization of the MPCC as a mixed-integer linear program (MILP) and solving the MILP to global optimality. Non-uniform distribution of breakpoints that delimit piecewise intervals and feasibility-based domain reduction are further employed to reduce the approximation error brought by linearization. The model is implemented in a simplified Singapore network with extensive sensitivity analyses and the Sioux Falls network. Computational results demonstrate the effectiveness and efficiency of the solution approach and yield valuable insights about transportation system performance in a mixed autonomous/human driving environment.     

Estimating the bus user time benefits of implementing a median busway: Methodology and case study

This paper presents a general framework to estimate the bus user time benefits of a median busway including the effects on travel time and access time. Unlike previous models, we take into account the effects of geometry and the interaction with the demand structure. Models for predicting the bus in-vehicle time benefits of a median dual carriageway busway against mixed traffic condition on 2 and 3 lanes roads are estimated using data from a case study in Santiago (Chile), using a bus travel time model empirically estimated and considering different base case situations, including mixed traffic operations and bus lanes. Results of the application show that the expected in-vehicle time savings of a median busway might be reduced by access time losses due to increased walking distances and road crossing delays. Also, that net time benefits can vary significantly according to the base situation and the structure of demand considered. These findings point out to the need of including a wider set of impacts when studying the benefits of median busways, beyond in-vehicle time savings only. The empirical work presented here is completely based on passive data coming from GPS and smartcards, what makes easier and cheaper to conduct this type of analysis as well as to do it with a comprehensive scope at an early stage of the development of a BRT project. This framework can be extended to other types of dedicated bus lanes provided that a corresponding bus travel time savings model is available.     

Mining missing train logs from Smart Card data

This paper shows how to recover the arrival times of trains from the gate times of metro passengers from Smart Card data. Such technique is essential when a log, the set of records indicating the actual arrival and departure time of each bus or train at each station and also a critical component in reliability analysis of a transportation system, is missing partially or entirely. The procedure reconstructs each train as a sequence of the earliest exit times, called S-epochs, among its alighting passengers at each stations. The procedure first constructs a set of passengers, also known as reference passengers, whose routing choices are easily identifiable. The procedure then computes, from the exit times of the reference passengers, a set of tentative S-epochs based on a detection measure whose validity relies on an extreme-value characteristic of the platform-to-gate movement of alighting passengers. The tentative S-epochs are then finalized to be a true one, or rejected, based on their consistencies with bounds and/or interpolation from prescribed S-epochs of adjacent trains and stations. Tested on 12 daily sets of trains, with varying degrees of missing logs, from three entire metro lines, the method restored the arrival times of 95% of trains within the error of 24 s even when 100% of logs was missing. The mining procedure can also be applied to trains operating under special strategies such as short-turning and skip-stop. The recovered log seems precise enough for the current reliability analysis performed by the city of Seoul.     

A measurement to driving situation awareness in signalized intersections

Drivers get involved easily in Left-Turn Across Path with Opposite Direction Traffic (LTAP-OD) conflicts at signalized intersection with unprotected left-turn phasing. This study classified the left-turn drivers’ performance into four types: (1) the correct acceptance of safe lags/gaps, (2) the correct rejection of dangerous lags/gaps, (3) the false rejection of safe lags/gaps and (4) the false acceptance of dangerous lags/gaps. Based on the high mounted video camera data, the logistic regression model was used to obtain the critical gaps for estimating whether the lags/gaps were safe or not. The results show that the cognition behavior of the left-turn drivers should be improved while the gap/lag is drawn near the critical gap. Furthermore, the conservative drivers are more likely to reject the larger lags/gaps and yield the right-of-way to the opposing vehicles. Simultaneously the poor response execution may cause drivers to have difficulties during the turning performance when the lags/gaps are large enough. These results could be used as the basis for a discussion of the right time to support the drivers.     

Commuters’ behavior towards upgraded bus services in Greater Beirut: Implications for greenhouse gas emissions,social welfare and transport policy

Climate change is one of the most critical environmental challenges faced in the world today. The transportation sector alone contributes to 22% of carbon emissions, of which 80% are contributed by road transportation. In this paper we investigate the potential private car greenhouse gas (GHG) emissions reduction and social welfare gains resulting from upgrading the bus service in the Greater Beirut Area. To this end, a stated preference (SP) survey on mode switching from private car to bus was conducted in this area and analyzed by means of a mixed logit model. We then used the model outputs to simulate aggregate switching behavior in the study area and the attendant welfare and environmental gains and private car GHG emissions reductions under various alternative scenarios of bus service upgrade. We recommend a bundle of realistic bus service improvements in the short term that will result in a reasonable shift to buses and measurable reduction in private car emissions. We argue that such improvements will need to be comprehensive in scope and include both improvements in bus level of service attributes (access/egress time, headway, in-vehicle travel time, and number of transfers) and the provision of amenities, including air-conditioning and Wi-Fi. Moreover, such a service needs to be cheaply priced to achieve reasonably high levels of switching behavior. With a comprehensively overhauled bus service, one would expect that bus ridership would increase for commuting purposes at first, and once the habit for it is formed, for travel purposes other than commuting, hence dramatically broadening the scope of private car GHG emissions reduction. This said, this study demonstrates the limits of focused sectorial policies in targeting and reducing private car GHG emissions, and highlights the need for combining behavioral interventions with other measures, most notably technological innovations, in order for the contribution of this sector to GHG emissions mitigation to be sizable.     

The cost of equity: Assessing transit accessibility and social disparity using total travel cost

Social equity is increasingly incorporated as a long-term objective into urban transportation plans. Researchers use accessibility measures to assess equity issues, such as determining the amount of jobs reachable by marginalized groups within a defined travel time threshold and compare these measures across socioeconomic categories. However, allocating public transit resources in an equitable manner is not only related to travel time, but also related to the out-of-pocket cost of transit, which can represent a major barrier to accessibility for many disadvantaged groups. Therefore, this research proposes a set of new accessibility measures that incorporates both travel time and transit fares. It then applies those measures to determine whether people residing in socially disadvantaged neighborhoods in Montreal, Canada experience the same levels of transit accessibility as those living in other neighborhoods. Results are presented in terms of regional accessibility and trends by social indicator decile. Travel time accessibility measures estimate a higher number of jobs that can be reached compared to combined travel time and cost measures. However, the degree and impact of these measures varies across the social deciles. Compared to other groups in the region, residents of socially disadvantaged areas have more equitable accessibility to jobs using transit; this is reflected in smaller decreases in accessibility when fare costs are included. Generating new measures of accessibility combining travel time and transit fares provides more accurate measures that can be easily communicated by transportation planners and engineers to policy makers and the public since it translates accessibility measures to a dollar value.     

A model of the travel to work limits of parents

This paper considers the length of time that parents are willing to travel to an existing or new job. Using data for over 12,000 parents it finds that many characteristics were associated with being less likely to be willing to travel to work for at least an hour (roundtrip). These include: being a women, those out of work, having children under 5, being a lone parent and using formal childcare. Professionals and associate professions were more willing to travel for longer periods. In terms of location, those in accessible small towns and rural areas were willing to travel more than those in larger urban areas and those in remote rural areas willing to travel most. Policy implications are also set out.