BIM技术在深圳机场三跑道填海工程设计中的应用

针对BIM技术在填海工程设计中的应用,深圳机场三跑道填海工程设计中采用AUTODESK平台,以基于云端的协同平台进行协同设计,将各专业更加紧密地联系在一起,解决了传统设计的沟通、协调难题,且根据勘察资料创建三维地质模型,并采用Civil 3D软件进行基槽和海堤施工图设计,提高设计效率及精度,为BIM技术在水运行业的推广及应用提供借鉴。     

Validating and improving public transport origin–destination estimation algorithm using smart card fare data

Smart card data are increasingly used for transit network planning, passengers’ behaviour analysis and network demand forecasting. Public transport origin–destination (O–D) estimation is a significant product of processing smart card data. In recent years, various O–D estimation methods using the trip-chaining approach have attracted much attention from both researchers and practitioners. However, the validity of these estimation methods has not been extensively investigated. This is mainly because these datasets usually lack data about passengers’ alighting, as passengers are often required to tap their smart cards only when boarding a public transport service. Thus, this paper has two main objectives. First, the paper reports on the implementation and validation of the existing O–D estimation method using the unique smart card dataset of the South-East Queensland public transport network which includes data on both boarding stops and alighting stops. Second, the paper improves the O–D estimation algorithm and empirically examines these improvements, relying on this unique dataset. The evaluation of the last destination assumption of the trip-chaining method shows a significant negative impact on the matching results of the differences between actual boarding/alighting times and the public transport schedules. The proposed changes to the algorithm improve the average distance between the actual and estimated alighting stops, as this distance is reduced from 806 m using the original algorithm to 530 m after applying the suggested improvements.     

BIM技术在大型集装箱码头工程设计中的应用

上海国际航运中心洋山深水港四期工程是国内首个全自动化集装箱码头,以此为依托,针对BIM技术在集装箱码头工程设计中应用的问题进行总图、水工、机械等相关专业BIM技术应用的研究,将BIM技术与传统二维设计模式相融合,采用欧特克BIM系列软件以及探索者BIM协同平台,得出全自动化集装箱码头BIM总体设计技术路线,重点对BIM协同设计平台的应用流程以及设计相关专业的BIM应用方法进行探讨,为全自动化集装箱码头从传统二维设计向基于BIM技术全生命周期设计应用的转变提供参考。     

三维地面模型测量技术在水运工程中的应用

码头、航道等水运工程的三维设计、BIM设计需要更精细的、直观的、全覆盖的三维地面模型。利用多波束测深技术、无人机航测技术和三维激光扫描技术采集高精度的测量点云数据,基于AutoCAD、Civil 3D等软件平台,建立高精度、直观的三维地面模型的技术方案,结合工程实例进行论证分析。结果表明,从陆域到水域再到局部重点建构筑物三维测量内外业技术解决方案合理、效果显著,能较好地满足三维设计、BIM设计等要求,具有较高的应用和参考价值。     

新型混凝土单元块D型软体排结构计算及稳定性分析

针对长江中下游航道整治水下沉排工程中软体排结构的不足,提出一种新型混凝土单元块D型软体排结构,建立悬链线模型,分析排体的受力特点,计算排体的抗倾、抗滑和抗漂浮稳定性,并对比分析排体对地形的适应性。结果表明,新型混凝土单元块D型软体排结构明显提高了水下沉排的安全性和对复杂地形的适应性,为复杂条件下的水下沉排工程提供理论支撑。     

基于FLAC3D的高填方路堤通道涵洞受力特性数值分析

文章以厦蓉高速公路广西境内灌阳至全州段K13＋710通道涵洞为工程实例,利用FLAC3D（快速拉格朗日分析）软件对高填方路堤中的顶板通道进行数值仿真分析,总结了高填方路堤通道涵洞的受力特性,并提出了通道涵洞设计施工中应注意的问题。     

浅埋顶管沉井周边土体的三维破坏形状及沉降研究

为研究顶管沉井及周边土体在顶进力作用下的形变范围与大小，以加固旋喷桩作为沉井周围加固体建立ABAQUS软件计算模型，并将模拟结果与工程实例、PLAXIS 3D软件所得结果进行对比分析。同时，采用广州地区花岗岩残积土进行室内沉井模型试验，并通过试验结果对数值模拟结论进行验证，得出结论如下： 1）在开挖基坑前达到设计强度的旋喷桩能有效减小基坑周边土体塌陷变形、坑底隆起。2）在施加工作顶推力下，前侧主动区首先出现贯通裂缝，竖向位移斜率增大出现明显拐点；继续增大顶推力，土体位移会急剧增大导致地表沉降严重。3）对于后背土体，在顶推力作用下，地表破裂线的切线角度从0°逐渐增大至45°+φ/2，导致破裂范围也不断扩大；达到45°+φ/2处后，继续施加顶推力会导致短轴方向破坏范围扩大的速度较长轴方向的速度更快；三维空间中被动区破坏土体在地表处产生形状为椭圆的破坏面，椭圆长轴方向为顶推轴线方向，被动破坏体呈现为牛角状椭圆楔体。     

The Bid-rent Land Use Model of the simple,efficient, elegant,and effective model of land use and transportation

Integrated land use/transportation forecasting models add significant policy and infrastructure alternatives analysis capabilities to the urban planning process. The financial, time, and staff requirements to develop these models has put them beyond the reach of most small to medium sized urban areas. This paper presents the land use allocation submodel of the Simple, Efficient, Elegant, and Effective model of land use and transportation (SE³M), an integrated land use and transportation forecasting model founded upon Economic Base Theory and Bid-rent Theory. The Bid-rent Land Use Model (BLUM) is an agent based, spatial competition model utilizing unique utility curves for willingness to pay and incomes for budget constrained abilities to pay for each agent. The model structure, estimation, calibration, implementation, and validation are presented. With a single year of land use data available, the validation approach used the Kappa Index of Agreement to spatially check model outputs against base year control data while controlling for agreement by chance. The U.S. territory of Guam is used as the case study/proof of concept implementation for this model framework. Once calibrated, BLUM could solve the spatial competition problem on Guam in less than two minutes of processing time with over 90% accuracy.     

三维水弹性软件并行化的初步实现

为了满足超大型浮体尺寸巨大、结构复杂的分析需求,以及三维水弹性软件商用化的快速计算要求,文章通过对已有三维水弹性程序的分析,设计并实现了多参数并行化快速计算,为超大型浮体进一步水弹性分析奠定了良好基础。文中以常规船舶和超大型浮式平台为例,测试了并行化软件的正确性与快速性。结果表明,并行化改造达到了快速计算的效果。     

ω-3多不饱和脂肪酸对人胃腺癌细胞系AGS的作用

目的探讨ω-3多不饱和脂肪酸对人胃腺癌AGS细胞生长增殖的作用和可能的机制。方法以不同浓度梯度的DHA、EPA作用于体外培养的AGS细胞和人微血管内皮细胞HMEC-1,采用四甲基偶氮唑蓝(MTT)观察细胞增殖抑制率,使用流式细胞仪检测细胞周期变化,采用Western blot分析细胞线粒体呼吸链膜蛋白复合体Ⅰ、Ⅱ、Ⅴ表达变化。结果 DHA和EPA对胃腺癌AGS细胞增殖具有明显抑制作用,该抑制作用呈现明显的剂量时间依赖效应的特点(P<0.05),在相同的浓度梯度下,DHA的抑制作用强于EPA(P<0.05)。倒置显微镜下DHA作用后观察到AGS细胞明显皱缩,细胞的贴壁能力明显减弱。流式细胞仪检测显示,DHA、EPA干预后AGS细胞的DNA合成前期(G0/G1期)细胞分布比例明显增加,DNA合成期(S期)细胞分布比例明显减少(P<0.05)。Western blot分析可见,DHA干预AGS细胞24h和48h后,与对照组比较,AGS线粒体呼吸链膜蛋白复合体Ⅰ、Ⅱ、Ⅴ表达灰度值显著下降,而且随着作用时间延长,复合体表达灰度值下降愈明显(P<0.05)。DHA对人微血管内皮细胞的生长增殖、细胞形态和线粒体呼吸链膜蛋白复合体无明显影响(P>0.05)。结论ω-3多不饱和脂肪酸可选择性有效地抑制人胃腺癌AGS细胞的生长增殖。该作用可能是通过阻滞AGS细胞于G0/G1期和抑制AGS细胞能量代谢来实现的。