预制梁制作过程中的散喷养生及水循环利用

散喷养生及水循环利用工艺采用压力泵送原理对预制梁构件进行高质量的快速养生,并结合养生用水的收集、沉淀和净化后重复再用的工艺达到节水的目的,其结果不仅降低了工程成本,而且具有明显的环保效果。     

探讨道桥施工以及养护管理

对当今道桥的施工以及养护管理存在的问题进行了详细的分析，提出道桥施工质量控制要点，构建桥梁养护质量体系。     

高速铁路通信信号设备接口雷电防护优化设计

提出了临界防护状态的概念,分析了临界防护状态使设备损坏的原因,提出高速铁路通信信号设备接口雷电防护优化设计方法,通过有效方法掌握被防护对象的耐冲击水平值和SPD各器件的耐受值,做到量化设计,保证防护的可靠性.     

港口现有模拟化视频监控系统的数字化改造

为了提高对港口设备的监控水平，秦皇岛港口对SOLAS模拟监控系统实施了数字化改造。介绍监控技术的发展现状、设备背景和改造思路，以及改造所需的设备和改造方法。采用模拟与数字化相混合的数字监控系统，高效、安全，满足了生产需求。     

有限元分析在12m标准轨道衡承重梁设计中的应用

在12 m标准轨道衡承重梁设计过程中采用有限元分析,利用Ansys建立承重梁的几何模型和以壳单元shell63为基本单元的承重梁有限元计算模型。计算模型在不同载荷作用下的最大应力以及变形情况,提出在不改变主体结构的情况下对承重梁进行加固。此方法可为12 m标准轨道衡承重梁的结构设计和改进提供理论依据。     

The Necessity of Establishing a Regional Marine Research Program for the U.S. West Coast

The welfare of the marine environment of the U.S. West Coast of California, Oregon, and Washington is hindered by insufficient understanding of ecosystem dynamics and human pressures. Greater coordination, integration, and support of mutually identified research priorities across research organizations on the West Coast are necessary. This level of collaboration is essential to responding to regional ecosystem threats, such as the impacts of human occupation of coastal areas, over-harvesting of marine resources, and climate change. To address this need for collaboration and build on the accomplishments of existing research organizations, this article advocates the establishment of a West Coast regional marine research program (RMRP).     

Lead emission rates from gasoline engines—a legislative and in‐use emission rate study of U.K. and U.S. to 1990

Concern for reduction in air‐borne lead emission from passenger cars is focussed on both the legislative and practical steps in reducing lead in gasoline. The historical trends and projections to 1990 of present U.S. and U.K. policies are examined in terms of a baseline passenger car lead emission rate, g.km^‐1. It is likely that should the U.K. adopt a lead‐free petrol the decrease in lead emissions will only partially parallel the present U.S. experience from a start‐up date typically post 1990. The U.S. gasoline pool philosophy has permitted lead levels in gasoline to remain high; a pitfall which the U.K./EEC should avoid.     

The design of a terminal for dangerous goods

This paper aims at examining the possibility of setting up a model terminal for the transportation of dangerous goods. It should be designed in such a manner that its use would be possible for any kind of transportation.

This consideration has been prompted by the interface between transportation planning and technology, as well as by the tendency for harmonizing international recommendations pertaining to the transportation and handling of dangerous goods, especially during the last decades where unified transport has gained ground due to the advantages provided for the safe consignment of dangerous cargoes.

Since the large increase in terminal productivity is due to the heavy investments that were effected in terminal installations and to the modernization of the administration‐management of terminals, a mathematical simulation has been adopted to assist the determination of the capacity of a terminal for dangerous goods.

It is evident that different criteria and various assumptions have been taken into account in order to facilitate a deeper analysis, without ignoring the contribution of dangerous goods to the socio‐economic development.

From the outset of the study, it was already clear that the said process will make it possible to present—as a model—a simple but well defined situation for the purpose of drawing useful conclusions.     

Estimating travel time functions for urban roads: options and issues

Travel time functions specify the relationship between the travel time on a road and the volume of traffic on the road. Until recently, the parameters of travel time functions were rarely estimated in practice; however, a compelling case can be made for the empirical examination of these functions. This paper reviews, and qualitatively evaluates, a range of options for developing a set of travel time functions. A hierarchy of travel time functions is defined based on four levels of network detail: area, corridor, route and link. This hierarchy is illustrated by considering the development of travel time functions for Adelaide. Alternative sources of data for estimating travel time functions are identified.

In general, the costs and benefits increase as the travel time functions are estimated at finer levels of network detail. The costs of developing travel time functions include data acquisition costs and analysis costs. The benefits include the potential for reducing prediction errors, the degree of application flexibility and the policy sensitivity of the travel time functions.     

桥梁结构耐久性分析

文章在分析影响桥梁结构耐久性主要病因基础上,针对桥梁结构使用、施工与设计中的问题进行了分析,同时就如何提高结构耐久性提出建议,具有一定的借鉴意义。