基于无人机的高层住宅最后“一百米”配送优化

针对城市高层住宅顾客对上门配送服务的需求，借助无人机停放平台，考虑包裹异质性以及无人机在不同配送阶段的精确能耗，构建以无人机飞行成本和能耗成本最小为目标，以无人机容量、电池组容量等为约束的高层住宅无人机上门配送模型，解决“垂直位置最后一百米配送”问题。基于此模型，设计带变邻域下降(VND)搜索的混合蚁群算法(HACO-VND)，引入4个算子进行变邻域下降搜索，为了提高算法的求解性能，提出两种局部搜索算子组合，根据顾客点数量使用不同的算子组合。实验结果表明，HACO-VND算法较CPLEX在求解精度与求解时间方面更优，特别是在大中型算例中表现出较佳性能。参数分析表明，高层住宅楼层数越多，无人机单次 飞行的能耗利用率越大，无人机容量与电池组容量共同对配送方案产生影响。为以后无人机送货上门服务方面的研究提供参考和思路。     

编队飞行中基于危险区域的后机最优位置研究

编队飞行是实现民航绿色发展的重要措施之一。在前机尾涡危险区域分析的基础上，科学确定后机最优位置是编队飞行的关键。首先，以随机两阶段尾涡消散模型为基础，利用Hallock-Burnham涡模型和诱导滚转力矩系数模型分析后机诱导滚转力矩系数的演变规律。然后，基于设定的安全阈值，给出前机尾涡危险区域，并考虑飞行高度、速度和风对危险区域的影响。最后，基于后机不同位置处的燃油流量减少率，得出编队飞行中后机最优位置。研究结果表明：后机诱导滚转力矩系数随着前、后机之间横向距离的增加，呈先增后减再增的趋势；随纵向距离的增加，呈先缓慢减小后快速减小的趋势；高度越高、速度越小，诱导滚转力矩系数的峰值越高。飞行高度越高、速度越小，前机初始尾涡的危险区域越大；随着纵向距离的增加，危险区域不断减小，并随涡核的下沉不断下降。侧风使危险区域发生偏离，侧风越大，偏离程度越大。顺风会增加危险区域的纵向距离，顶风则与之相反。两架B737-800飞机在12000 m高度以0.78马赫数进行编队飞行时，前、后机纵向距离3000m处，无风情况下后机最优位置为横向距离30 m 或-30 m、垂直距离29 m，此时燃油流量减少率为7.01%。相较于无风，左侧风20 m·s -1 下，燃油流量减少率和垂直距离不变，横向距离增加；顺风20 m·s -1 下，燃油流量减少率增加，横向距离不变，垂直距离减少；顶风20 m·s -1 下，燃油流量减少率减小，横向距离不变，垂直距离增加。     

Dynamic response of stiffened plate under internal blast: Experimental and numerical investigation

Stiffened plates are the basic units of ships, aircraft and other structures. The purpose of this paper is to investigate the dynamic response of stiffened plates under internal blast loading. A combined experimental and numerical investigation was carried out on the cabin structures with unstiffened, single-stiffened and double-stiffened plates. The characteristics of internal blast wave, the effects of stand-off distance and the stiffener position on the deflection and failure modes of stiffened plates were sequentially analyzed. It was interestingly found that the deflection first decreased and then increased with the increase of stand-off distance. Additionally, despite of the reinforcement on the deformation resistance, the stiffeners tended to reduce the damage tolerance of the target plates. This research provides the basic data and theoretical support for the blast resistance design of ships, aircraft and other structures.     

聚焦“专业岗位职务能力”背景下的课程改革与实践——以“建筑结构基础与钢筋算量”课程为例

建筑结构识图和钢筋算量是高职土建类专业学生的核心技能之一。通过聚焦"专业岗位职务能力",对课程重新定位,结合工作岗位任务进行教学内容选取并实施综合考核方式,使学生的知识技能更加贴合专业岗位需求,并实现学生学习热情的长效性,让学生更加适应市场需求,取得了较好的教学效果。     

动车组位置追踪系统常见问题影响分析及解决方法

从动车组位置追踪系统的系统原理、系统接口等方面出发,分析了系统日常应用过程中常见问题的影响,并给出了相应的解决方法,为动车段/所位置追踪系统的设计、应用和维护提供了积极的思路。     

基于装配序列分析的船体结构焊接位置仿真算法

为合理计算焊接工时,在普适的船舶结构装配原则基础上,根据最小装配、相邻装配、同分支非相邻装配,不同分支装配的焊接阶段、装配基面朝向判定方法、以及焊接位置简化计算原则,构建船体结构焊缝装配仿真算法,通过由装配基面方向进一步计算得到焊接轴线和焊接体朝向,结合中国船级社相关规范确定焊接位置,在Smart3D?软件三维空间中实现了船舶结构装配焊接位置的仿真计算,计算结果准确,过程高效。     

新建本科院校市场营销专业模块化教学改革——基于岗位和能力导向的应用技术人才培养

通过行业论证和企业调查,明确市场营销职业岗位类别设置及特征,掌握这些职业岗位对应用技术性本科学生知识、能力和素质等方面的现实需求,通过问卷调查本校市场营销专业学生对专业教学的现状及建议,参考广东部分新建本科院校的做法,建立市场营销专业的岗位需求、工作内容、职业能力、模块教学和任务学习为一体的教学模式。     

A survey on modeling and control of thruster-assisted position mooring systems

This review presents a systematic summary of the state-of-the-art development of technological solutions, modeling, and control strategies of thruster-assisted position mooring (TAPM) systems. The survey serves as a starting point for exploring automatic control and real-time monitoring solutions proposed for TAPM systems. A brief historical background of the mooring systems is given. The kinematics and a simplified kinetic control-design model of a TAPM system are derived in accordance with established control methods, including a quasistatic linearized model for the restoring and damping forces based on low-frequency horizontal motions of the vessel. In addition, another two mooring line models, i.e., the catenary equation and the finite element method model, are presented for the purpose of higher-fidelity simulations. The basic TAPM control strategies are reviewed, including heading control, surge-sway damping, roll–pitch damping (for semisubmersibles), and line break detection and compensation. Details on the concepts of setpoint chasing for optimal positioning of a vessel at the equilibrium position are discussed based on balancing the mooring forces with the environmental loads and avoiding mooring line failure modes. One method for setpoint chasing is the use of a structural reliability index, accounting for both mean mooring line tensions and dynamic effects. Another method is the use of a lowpass filter on the position of the vessel itself, to provide a reference position. The most advanced method seems to be the use of a fault-tolerant control framework that, in addition to direct fault detection and isolation in the mooring system, incorporates minimization of either the low-frequency tensions in the mooring lines or minimization of the reliability indices for the mooring lines to select the optimal directions for the setpoint to move. A hybrid (or supervisory switching) control method is also presented, where a best-fit control law and observer law are automatically selected among a bank of control and observer algorithms based on the supervision of the sea-state and automatic switching logic.     

喷孔位置对船用天然气发动机燃烧及排放影响的模拟研究

为了探究天然气与柴油喷孔位置对天然气发动机燃烧和排放的影响,基于L23/30天然气发动机,建立了柴油引燃天然气的发动机模型,利用CONVERGE软件对燃烧过程和排放进行模拟分析。模拟结果表明：由于天然气与柴油喷孔位置变化的影响,会导致柴油引燃天然气在空间的变化,因此对发动机的燃烧和排放造成了影响,通过对比不同喷嘴间的距离和不同喷嘴分布的设计方案得出,采用中心对称设计时获得了较好的燃烧和排放性能。     

激光复合焊工艺参数选择

针对激光复合焊首次应用于船舶制造,参数众多,缺少针对性试验的问题,进行多参数调整、多次对比试验,分析各项参数对激光复合焊质量的影响,结合试验数据提出各项参数的合理范围,确定的重要参数有激光功率、激光吸收率、焦点位置及光丝间距,与电弧相关的参数有焊接速度、送丝速度,以及过渡形式,各项参数的参数调整会直接影响到复合效果,进而影响焊接质量。