自升式平台升降装置设计与强度分析

针对自升式平台升降装置长期依赖进口的现状,自主设计研发了400英尺及以上作业水深的自升式平台电动齿轮齿条传动升降装置,并对其关键部件爬升齿轮进行了重点设计及强度分析。通过DNV及相关规范与有限元结果对比的方法对升降装置关键部位在风暴自存工况下进行强度校核,分析其结构强度性。根据方案设计生产升降装置样机,并对试验样机并进行了载荷试验、疲劳试验,试验结果表明,该装置符合设计和使用要求,为自升式平台升降装置设计提供指导与参考。     

舱口盖强度计算方法

在某集装箱舱口盖结构强度的有限元计算中，对舱口盖周围水平限位器和支撑块处的约束以及顶部压紧器处的关联程度进行了模拟，分别讨论了在垂向设计载荷的情况下，水平限位器、支撑块处的不同约束以及顶部压紧器的不同关联程度对舱口盖应力分布的影响，得出更符合实际情况的舱口盖结构强度计算方法。     

Analysis of cross effect on inherent deformation during the line heating process – Part 1 – Single crossed heating lines

This paper describes the effect of previous heating on inherent deformation by a subsequent heating line, more specifically, the case of two heating lines intersecting (crossing) each other. The paper has been divided into two parts. In the first part, the case of single crossed heating lines is studied in detail. The second part of the paper, discusses the case of more than one crossed heating lines. The novelty of the work lies in revealing the cross effect and how, factors such as, for example, the heating condition and the plate geometry, influence the resulting inherent deformation of crossed heating. In addition, relationships to easily get these influences are provided. The results are suitable for a wide range of heating conditions and plate thickness.     

A design method of tensile triangles and low transformation temperature weld metal for reduction of stress concentration and residual stress of welded joints

Stress concentration and residual stress have a significant influence on fatigue life of welded joints. In order to reduce the stress concentration of welded joints, a mathematical design method of tensile triangles (MTT) based on bionics was applied to weld shape design. Accordingly, the stress concentration of various weld beads in the corner boxing welded joint and the fillet welded T-joint was dissected using our in-house FEM software JWRIAN. It was found that there existed a large stress concentration in the conventional welded joints, whereas those welded joints with elongated weld bead were accompanied by a lower stress concentration, especially for elongated weld bead with MTT design. Furthermore, among the weld shapes of the corner boxing fillet welded joint, the rectangle shape of weld bead had the minimum stress concentration factor (1.05). For the fillet welded T-joint with MTT design, the stress concentration of weld toe decreased dramatically with the increase of the index of designed shape, but there was a minor difference of stress concentration at weld root between the weld beads with MTT design. In addition, application of low transformation temperature (LTT) weld metal utilizing martensitic transformation to the fillet welded T-joints can produce compressive residual stress at weld toe.     

某型气垫登陆艇燃气涡轮发电机组弹性轴断裂分析

介绍了气垫登陆艇的故障现象,通过故障现象分析,对故障进行了定位,通过对故障件进行理化分析、金相组织分析、断口分析,设计图样与实物的制造符合性分析,最后采用实例建模进行了强度校核,得出某型气垫登陆艇燃气涡轮发电机组弹性轴断裂的故障模式。     

基于规范方法的小水线面双体船疲劳强度研究

论文介绍了船舶结构疲劳强度评估基本原理,并对一条2200t级小水线面双体船进行规范法疲劳强度评估。针对小水线面双体船结构特点,采用规范进行疲劳载荷计算；结合全船有限元计算结果进行疲劳部位筛选；采用有限元法提取疲劳部位的热点应力,并计算疲劳部位的累积损伤度。分析计算结果,提出疲劳部位优化方案。     

白云岩水稳基层强度与龄期关系

在公路路面建设中,集料的化学成分对沥青混合料和水稳碎石的物理力学性质起着重要的作用。结合在草市至南杂木高速公路铺筑的白云岩试验段,对白云岩水稳基层混合料的强度与龄期的关系进行阐述。     

Assessment of fatigue strength of steel butt-welded joints in as-welded condition – Alternative approaches for curve fitting and mean stress effect analysis

Experimental fatigue data for butt-welded joints in as-welded condition and under constant amplitude tensile loading (secondary bending included) were analyzed using the nominal stress system and the notch stress system. Two approaches were used; a standard fitting procedure and minimization of the sum of squared perpendicular distances from a line with a fixed and free slope. In all cases, the latter method gave better agreement between the experimental and predicted fatigue life and fatigue strength. The analyses showed both with all broken specimen data included and with reduced data that the FAT225 curve, as recommended by IIW, might be too optimistic for the notch stress approach in the case of butt-welded joints in as-welded condition. It was also found that use of the local stress ratio instead of the applied stress ratio might explain many issues concerning current observations and apparent inconsistencies in reported literature.     

浮冰冲击作用下的乙烯运输船体 舷侧结构强度分析

对无限航区的21000m3乙烯运输船舷侧结构,分别采用纵骨架式和横骨架式冰区加强设计。根据FSICR规范要求,更新舷侧冰带区域内构件尺寸,并针对艏部冰带区域内船体结构,分别建立了原始的、纵骨架式的和横骨架式的冰带结构设计有限元模型。通过强度计算,认为艏部冰带区新结构满足规范设计载荷要求。在此基础上,单独建立艏货舱冰区舷侧外板板架有限元模型,研究两种新设计形式适用的外板在更大浮冰冲击载荷作用下塑性变形。计算结果表明:纵骨架式结构外板塑性变形明显低于横骨架式。     

悬索桥索夹的设计及验算

悬索桥主要结构由主缆、桥塔、吊索、加劲梁等组成。索夹位于每根吊索和主缆的连接节点上,是主缆和吊索的连接件。结合工程实例,对索夹布置、索夹构造的确定、索夹安全系数验算及索夹强度验算进行了详细介绍。