Widening the Panama Canal and U.S. ports: historical and economic impact analyses

ABSTRACT

The economic history of the U.S. illustrates how the role of many cities has been changed by being seaports or located on navigable rivers or lakes. Based on the widening of the Panama Canal in 2016, the West Coast ports that include the west coast seaports of California, Oregon, and Washington were expected to become less important, while the freight shares of the East Coast and Gulf ports would increase. By how much it has been not easy to measure or predict so far, but this study attempted to define some of the key parameters in the measurement. As well as several relevant background topics, both the demand- and supply-side versions of the National Interstate Economic Model, have been applied for the measurement of economic impacts. U.S. port authorities and policy makers at the local and national levels who respond and develop plans for coping with the new realities of the Panama Canal are able to understand the extent to which changes in shippers’ and land-mode transporters’ behaviors would undermine the logistics and the costs of their activities. Therefore, this study is important for a diverse spectrum of port development strategies in the U.S. to respond to the Canal expansion.     

Manpower and employment issues

Overmanning and restrictive labour practices are major causes of low productivity in Indian ports. Proposals are put forward for a programme of reforms to support investment in modern cargo handling systems.     

Estimation of value of travel time reliability

In mode choice decision, travelers consider not only travel time but also reliability of its modes. In this paper, reliability was expressed in terms of standard deviation and maximum delay that were measured based on triangular distribution. In order to estimate value of time and value of reliability, the Multinomial and Nested Logit models were used. The analysis results revealed that reliability is an important factor affecting mode choice decisions. Elasticity is used to estimate the impacts of the different policies and system improvements for water transportation mode. Among these policies, decision maker can assess and select the best alternative by doing the benefit and cost analysis based on a new market share, the value of time, and the value of reliability. Finally, a set of promising policies and system improvement of the water transportation were proposed.     

Total cost analysis: An alternative to benefit-cost analysis in evaluating transportation alternatives

This paper explains the theory in support of total cost analysis (TCA) to compare transportation system alternatives. The full costs of each alternative are first aggregated, including travel time costs and monetizable environmental and social costs. Many costs which are considered on the benefits side of the equation in benefit-cost analysis (BCA) as "cost savings" are brought over to the costs side. Total cost differences among alternatives are then traded off against their estimated non-monetized benefits or impacts, just as a consumer trades off product quality against cost before deciding which product he or she will buy. One advantage of TCA over traditional BCA is that the concept of "total cost" is more easily understood by the public and by political decision-makers than BCA concepts such as "net present worth", "benefit-cost ratio" and "internal rate of return". A second advantage is that there is no suggestion that all "benefits" have been considered; decision-makers are free to use their own value judgements to trade off total cost against non-monetizable social, environmental and economic impacts, just as they trade off quality and convenience against cost when purchasing goods and services in their roles as consumers. The TCA approach is demonstrated in this paper through a case study of two systemwide alternatives for the Baltimore, MD urban area.     

International Symposium on the Ice Carrying Trade at Sea

Overmanning and restrictive labour practices are major causes of low productivity in Indian ports. Proposals are put forward for a programme of reforms to support investment in modern cargo handling systems.     

Integrated approach to an optimal automotive timing chain system design

Ensuring engine efficiency is a crucial issue for automotive manufacturers. Several manufacturers focus on reducing the time taken to develop and introduce brand new vehicles to the market. Thus, a synergic approach including various simulations is generally adopted to achieve a development schedule and to reduce the cost of physical tests. This study involved proposing a design process that is very useful in the preliminary development stage through effective support from simulations. This type of simulation-based design process is effective in developing timing chain drives; the use of this process, based on results from multiple trials, showed improvements in performance including low friction and vibration, improved durability, and cost-effective part design when compared to conventional processes. This study proposes an integrated approach to the preliminary design of an automotive timing chain system. The approach involves structural and dynamic analyses. The details of the design process are described by using the case of a virtual engine. This study conducted and summarized a dynamic and structural analysis as well as topological optimization to describe a process to obtain optimal results. The results of this study indicated the following improvements in overall performance factors: 12.1 % improvement in transmission error, 10.1 % reduction in chain tension, 46 % reduction in tensioner arm weight, and 11 % reduction in transversal displacement.     

Vibration reduction of H/Shaft using an electromagnetic damper with mode change

The objective of this study is to develop a damper that can reduce the amplitude of vibration in various frequency ranges. Previous H/Shaft vibration reduction methods work in a passive way. A dynamic damper reduces the amplitude of vibration at its first mode, but vibration still appears at the second mode. A mass damper or hollow shaft can shift the natural frequency to a lower or higher region. The fixed operating frequency prevents vibration from being reduced outside the operating frequency range. The proposed damper uses electromagnets as either masses or actuators to change the damper mode between dynamic damper mode and mass damper mode. The electromagnetic damper (EMD) can change its mode to respond to the vibration excitation at both low and high frequencies. The vibration reduction performance was evaluated by FRF tests in laboratory and vehicle conditions. The results were compared with those of a dynamic damper and indicate that the amplitude of vibration is reduced by 95.6 % when the EMD is implemented on an H/Shaft, whereas only 61.9 % vibration reduction is achieved by the dynamic damper.     

A new efficient EDI system for container cargo logistics

There have been many efforts to develop a logistics information system in the Korean logistics industry. In spite of these efforts, there are many points which need improvement in the Logistics Information System, of which function is the electronic data communication without added value. This paper aims to describe some of the main problems and the successful factors which are being found in the evolution of the present EDI systems for clearing import/export container cargoes, with special reference to Singapore, Korea, and Japan. Following this, leaving legal issues aside, to suggest workable guidelines for designing a new efficient EDI system for container cargo logistics. As a result of the review, the following successful factors are drawn: (a) the planning, requirement analysis and design of EDI are critical, as it provides a framework for its implementation; (b) as the data of customs clearance are an integral part of a logistics EDI system, the inclusion of customs in the system design is essential; (c) the sharing system of cargo data as the framework of the logistics EDI is efficient for data interchange; (d) the EDI software for the user has been developed and provided by an EDI network operating company; and (e) to facilitate communication between trading partners and the transport sector, it is necessary to adopt a global message standard, such as EDIFACT.     

Neuro-Fuzzy Control of a Tracked Vehicle Featuring Semi-Active Electro-Rheological Suspension Units

This paper presents vibration control of a tracked vehicle installed with electro-rheological suspension units (ERSU). As a first step, an in-arm type ERSU is designed, and its spring and damping characteristics are evaluated with respect to the intensity of electric fields. Subsequently, a 16 degree-of-freedom model for a tracked vehicle equipped with the proposed ERSU is established followed by the formulation of a neuro-fuzzy controller. This controller takes account for both ride quality and steering stability by adopting a weighting parameter between two performance requirements. The parameter is appropriately determined by employing a fuzzy algorithm associated with two fuzzy variables: the vertical speed of the body and the rotational angular speed of the wheel. Control performances to isolate unwanted vibration from bump and random road excitations are evaluated through computer simulations. In addition, maximum speed of the vehicle with 6 Watt power absorption is investigated with respect to the road roughness.     

Optimum design of tilting bogie frame in consideration of fatigue strength and weight

This paper addresses the use of finite-element (FE) analysis to calculate the fatigue strength of a bogie frame, for the development of tilting trains in Korea. A multi-body dynamic analysis was performed to extract the load condition by tilting on curves. Using the results of the multi-body dynamic analysis and the load scenario setout in the UIC standard, FE analysis was performed to obtain the stress distribution and to calculate the fatigue strength. An attempt was made to minimize the weight of the bogie frame using a back-propagation artificial neural network (ANN). The results of this study reveal that the stresses at some nodes are near the fatigue limit in the Goodman diagram and by using back-propagation ANN, the weight of the bogie frame could be reduced by 4.7%.