Skyhook and H8 Control of Semi-active Suspensions: Some Practical Aspects

Summary This paper deals with single-wheel suspension car model. We aim to prove the benefits of controlled semi-active suspensions compared to passive ones. The contribution relies on H 8 control design to improve comfort and road holding of the car under industrial specifications, and on control validation through simulation on an exact nonlinear model of the suspension. Note that we define semi-active suspensions as control systems incorporating a parallel spring and an electronically controlled damper. However, the type of damper used in automotive industry can only dissipate energy. No additional force can be generated using external energy. The control issue is then to change, in an accurate way, the damping (friction) coefficient in real-time. This is what we call semi-active suspension. For this purpose, two control methodologies, H 8 and Skyhook control approaches, are developed, using a linear model of the suspension, and compared in terms of performances using industrial specifications. The performance analysis is done using the control-oriented linear model first, and then using an exact nonlinear model of the suspension incorporating the nonlinear characteristics of the suspension spring and damper.     

Impact of biometric and anthropometric characteristics of passengers on aircraft safety and performance

Demand for commercial air travel has been increasing over the years and recent forecasts indicate similar future trends. New aircraft with enhanced design features are being built and entering the airline service globally. These enhancements aim to ensure continued safety, efficiency, performance and prolonged life serviceability. However, these new enhancements often neglect the impact of the changing anthropometric characteristics of the passenger. Past studies have identified increasing trends in the average weight, height and other anthropometrical and biometrical measures of people at a global scale. However, many are limited to only exploring the ramifications primarily from the perspective of passenger experience. This paper highlights the importance of considering passengers’ anthropometric characteristics from a holistic perspective and identifies gaps for future research.     

Slam events of high-speed catamarans in irregular waves

Slam events experienced by high-speed catamarans in irregular waves were characterised through experiments using a hydroelastic segmented model. The model was designed to represent the dynamic behaviour of the full-scale Incat 112 m vessel and to allow the measurement of the slam load on the centrebow and wet deck. It was tested in irregular head seas at two speeds relating to Froude numbers of 0.32 and 0.60. Nearly 300 slams were identified in the test data and analysed with respect to kinematic parameters. Slams were found to have a large range of magnitudes, with the largest equivalent to 1785 tonnes full scale (approximately 70% of vessel displacement); however, the majority of events were of relatively low severity. Differences in slam characteristics were found for the two model speeds tested; slams at the slower speed generally occurred further forward on the hull, prior to the wave crest and with a bow down pitch angle. Immersion of the centrebow to the two-dimensional filling height of the cross-section between the centrebow and demihulls is shown to be a better indicator of slam occurrence than immersion to the top of the archway.     

Vehicle Handling Improvement by Active Steering

Summary This paper first analyses some stability aspects of vehicle lateral motion, then a coprime factors and linear fractional transformations (LFT) based feedforward and feedback H 8 control for vehicle handling improvement is presented. The control synthesis procedure uses a linear vehicle model which includes the yaw motion and disturbance input with speed and road adhesion variations. The synthesis procedure allows the separate processing of the driver reference signal and robust stabilization problem or disturbance rejection. The control action is applied as an additional steering angle, by combination of the driver input and feedback of the yaw rate. The synthesized controller is tested for different speeds and road conditions on a nonlinear model in both disturbance rejection and driver imposed yaw reference tracking maneuvers.     

Customization of Automatic Incident Detection Algorithms for Signalized Urban Arterials

Non-recurrent congestion or incidents are detrimental to the operability and efficiency of busy urban transport networks. There exist multiple automatic incident detection algorithms (AIDAs) to remotely detect the occurrence of an incident in highway or freeway scenarios; however, very little research has been performed to automatically detect incidents in signalized urban arterials. This limited research attention has mostly been focused on developing new urban arterial specific algorithms, rather than identifying alternative methods to synthesize existing freeway-based algorithms for urban conditions. The main hindrance to such synthesis is that the traffic patterns on the signalized urban arterials are significantly different from the same on highways/freeways due to the presence of traffic intersections. This article introduces a new strategy of customizing the existing AIDAs (freeway based or otherwise) to significantly improve their adaptability to signalized urban arterial transport networks. The new strategy focuses on preprocessing the traffic information before being used as input to a freeway/highway-based AIDA to lessen the effect of traffic signals and to imitate the input patterns in highway/freeway-based incident conditions. The effectiveness of this new strategy has been established with the help of four existing AIDAs. The proposed strategy is a simple solution to implement existing algorithms to signalized urban networks without any further instrumentation or operational cost.