Haptic steering support for driving near the vehicle’s handling limits; skid-pad case

Current vehicle dynamic control systems from simple yaw control to high-end active steering support systems are designed to primarily actuate on the vehicle itself, rather than stimulate the driver to adapt his/her inputs for better vehicle control. The driver though dictates the vehicle’s motion, and centralizing him/her in the control loop is hypothesized to promote safety and driving pleasure. Exploring the above statement, the goal of this study is to develop and evaluate a haptic steering support when driving near the vehicle’s handling limits (Haptic Support Near the Limits; HSNL). The support aims to promote the driver’s perception of the vehicle’s behaviour and handling capacity (the vehicle’s internal model) by providing haptic (torque) cues on the steering wheel. The HSNL has been evaluated in (a) driving simulator tests and (b) tests with a vehicle (Opel Astra G/B) equipped with a variable steering feedback torque system. Drivers attempted to achieve maximum velocity while trying to retain control in a circular skid-pad. In the simulator (a) 25 subjects drove a vehicle model parameterised as the Astra on a dry skid-pad while in (b) 17 subjects drove the real Astra on a wet skid-pad. Both the driving simulator and the real vehicle tests led to the conclusion that the HSNL assisted subjects to drive closer to the designated path while achieving effectively the same speed. With the HSNL the drivers operated the tires in smaller slip angles and hence avoided saturation of the front wheels’ lateral forces and excessive understeer. Finally, the HSNL reduced their mental and physical demand.     

Effect of handling characteristics on minimum time cornering with torque vectoring

In this paper, the effect of both passive and actively-modified vehicle handling characteristics on minimum time manoeuvring for vehicles with 4-wheel torque vectoring (TV) capability is studied. First, a baseline optimal TV strategy is sought, independent of any causal control law. An optimal control problem (OCP) is initially formulated considering 4 independent wheel torque inputs, together with the steering angle rate, as the control variables. Using this formulation, the performance benefit using TV against an electric drive train with a fixed torque distribution, is demonstrated. The sensitivity of TV-controlled manoeuvre time to the passive understeer gradient of the vehicle is then studied. A second formulation of the OCP is introduced where a closed-loop TV controller is incorporated into the system dynamics of the OCP. This formulation allows the effect of actively modifying a vehicle's handling characteristic via TV on its minimum time cornering performance of the vehicle to be assessed. In particular, the effect of the target understeer gradient as the key tuning parameter of the literature-standard steady-state linear single-track model yaw rate reference is analysed.     

Wheel slip control with torque blending using linear and nonlinear model predictive control

Modern hybrid electric vehicles employ electric braking to recuperate energy during deceleration. However, currently anti-lock braking system (ABS) functionality is delivered solely by friction brakes. Hence regenerative braking is typically deactivated at a low deceleration threshold in case high slip develops at the wheels and ABS activation is required. If blending of friction and electric braking can be achieved during ABS events, there would be no need to impose conservative thresholds for deactivation of regenerative braking and the recuperation capacity of the vehicle would increase significantly. In addition, electric actuators are typically significantly faster responding and would deliver better control of wheel slip than friction brakes. In this work we present a control strategy for ABS on a fully electric vehicle with each wheel independently driven by an electric machine and friction brake independently applied at each wheel. In particular we develop linear and nonlinear model predictive control strategies for optimal performance and enforcement of critical control and state constraints. The capability for real-time implementation of these controllers is assessed and their performance is validated in high fidelity simulation.     

Feedback brake distribution control for minimum pitch

The distribution of brake forces between front and rear axles of a vehicle is typically specified such that the same level of brake force coefficient is imposed at both front and rear wheels. This condition is known as ‘ideal’ distribution and it is required to deliver the maximum vehicle deceleration and minimum braking distance. For subcritical braking conditions, the deceleration demand may be delivered by different distributions between front and rear braking forces. In this research we show how to obtain the optimal distribution which minimises the pitch angle of a vehicle and hence enhances driver subjective feel during braking. A vehicle model including suspension geometry features is adopted. The problem of the minimum pitch brake distribution for a varying deceleration level demand is solved by means of a model predictive control (MPC) technique. To address the problem of the undesirable pitch rebound caused by a full-stop of the vehicle, a second controller is designed and implemented independently from the braking distribution in use. An extended Kalman filter is designed for state estimation and implemented in a high fidelity environment together with the MPC strategy. The proposed solution is compared with the reference ‘ideal’ distribution as well as another previous feed-forward solution.     

Dynamic tyre friction models for combined longitudinal and lateral vehicle motion

An extension to the LuGre dynamic friction model from longitudinal to longitudinal/lateral motion is developed in this paper. Application of this model to a tyre yields a pair of partial differential equations that model the tyre-road contact forces and aligning moment. A comparison of the steady-state behaviour of the dynamic model with existing static tyre friction models is presented. This comparison allows one to determine realistic values of the parameters for the new dynamic model. Via the introduction of a set of mean states we reduce the partial differential equations to a lumped model governed by a set of three ordinary differential equations. Such a lumped form describes the aggregate effect of the friction forces and moments and it can be useful for control design and online estimation. A method to incorporate wheel rim rotation is also proposed. The proposed model is evaluated by comparing both its steady-state as well as its dynamic characteristics via numerical simulations. The results of the simulations corroborate steady-state and dynamic/transient tyre characteristics found in the literature.     

Dynamic Friction Models for Road/Tire Longitudinal Interaction

Summary In this paper we derive a new dynamic friction force model for the longitudinal road/tire interaction for wheeled ground vehicles. The model is based on a dynamic friction model developed previously for contact-point friction problems, called the LuGre model. By assuming a contact patch between the tire and the ground we develop a partial differential equation for the distribution of the friction force along the patch. An ordinary differential equation (the lumped model) for the friction force is developed, based on the patch boundary conditions and the normal force distribution along the contact patch. This lumped model is derived to approximate closely the distributed friction model. Contrary to common static friction/slip maps, it is shown that this new dynamic friction model is able to capture accurately the transient behaviour of the friction force observed during transitions between braking and acceleration. A velocity-dependent, steady-state expression of the friction force versus the slip coefficient is also developed that allows easy tuning of the model parameters by comparison with steady-state experimental data. Experimental results validate the accuracy of the new tire friction model in predicting the friction force during transient vehicle motion. It is expected that this new model will be very helpful for tire friction modeling as well as for anti-lock braking (ABS) and traction control design.