Norwegian North Sea action programme: Analysis of measures to reduce nutrient inputs

According to the terms of the Ministerial Declaration on the Protection of the North Sea, input of the nutrients phosphorus (P) and nitrogen (N) to the coast from the Norwegian‐Swedish border to Lindesnes should be reduced by about 50% between 1985 and 1995. The State Pollution Control Authority (SFT) has analyzed how Norway can achieve this reduction in the most cost‐effective way and at the same time achieve the greatest possible improvement in water quality along the Norwegian coast and in its watercourses.

Two alternative sets of measures were analyzed, both of which would meet the requirements of the Declaration. The lowest‐cost alternative would have average annual costs of about NKr 930 million (U.S.S150 million), and investments of about NKr 4000 million (U.S. $643 million). However, this set of measures would not take account of local water quality, and measures would therefore not always be introduced where the need is most pressing. SFT proposed that an alternative set of measures be implemented, almost all of which would also help to achieve local goals for water quality. This alternative will have annual costs of about NKr 980 million (U.S.$158 million), and investments of about NKr 4100 million (U.S.$659 million).     

Dynamics of a railway vehicle on a laterally disturbed track

In this article a theoretical investigation of the dynamics of a railway bogie running on a tangent track with a periodic disturbance of the lateral track geometry is presented. The dynamics is computed for two values of the speed of the vehicle in combination with different values of the wavelength and amplitude of the disturbance. Depending on the combinations of the speed, the wavelength and the amplitude, straight line forward motion, different modes of symmetric or asymmetric periodic oscillations or aperiodic motions, which are presumably chaotic, are found. Statistical methods are applied for the investigation. In the case of sinusoidal oscillations they provide information about the phase shift between the different variables and the amplitudes of the oscillations. In the case of an aperiodic motion the statistical measures indicate some non-smooth transitions.     

Service network design with asset management: Formulations and comparative analyses

In this paper, we address the service network design with asset management problem, which integrates asset management considerations into service network design models for consolidation-based freight carriers. We propose model formulations based on arc variables for both flow and design, as well as formulations with path flow variables and new cycle design variables. Problem instances reflecting actual planning problems are used in the computational study to analyze the strengths and weaknesses of the various model formulations and the impact of asset management considerations on the transportation plan and the computational effort. Experimental results indicate that formulations based on cycle variables outperform traditional arc-based formulations, and that considering asset management issues may significantly impact the outcome of service planning models.     

Material transport from the nearshore to the basinal environment in the southern Baltic Sea: I. Processes and mass estimates

Processes involved in erosion, transport and deposition of cohesive materials are studied in a transect from shallow (16 m) to deep (47 m) water of the SW Baltic Sea. The wave- and current-induced energy input to the seabed in shallow water is high with strong variability and suspended matter concentrations may double within a few hours. Primary settling fluxes (from sedimentation traps) are less than 10 g m⁻² day⁻¹, whereas resuspension fluxes (evaluated from sedimentation flux gradients) are 15–20 times higher and the residence time for suspended matter in the water column is 1–2 days. Settling velocities of aggregates are on average six times higher than for individual particles resulting in an enhanced downward transport of organic matter. Wave-induced resuspension (four to six times per month) takes place with higher shear stresses on the bottom than current-induced resuspension (three to five times per month). The short residence time in the water column and the frequent resuspension events provide a fast operating benthic–pelagic coupling. Due to the high-energy input, the shallow water areas are nondepositional on time scales longer than 1–2 weeks. The sediment is sand partly covered by a thin fluff layer during low-energy periods. The presence of the fluff layer keeps the resuspension threshold very low (<0.023 N m⁻²) throughout the year. Evaluated from 3-D sediment transport modeling, transport from shallow to deep water is episodic. The net main directions are towards the Arkona Basin (5.5×10⁵ t per year) and the Bornholm Basin (3.7×10⁵ t per year). Energy input to the bottom in deep water is low and takes place much less frequently. Wave-induced resuspension occurs on average once per month. Residence time of particles (based on radioactive isotopes) in the water column is half a year and the sediment accumulation rate is 2.2 mm year⁻¹ in the Arkona Basin.     

Atmospheric emissions of European SECA shipping: long-term projections

We modeled the projections of the major atmospheric emissions from shipping of the European sulphur emission control area that includes the Baltic Sea, the North Sea, and the English Channel until 2040. Emission projections were calculated separately for every ship on annual basis, and the model took into account traffic growth, fleet renewal, and the forthcoming regulations. The regulation on sulfur content of ship fuels will drastically decrease the emissions of sulfur oxides and particulate matter (PM_2.5). As the regulation on nitrogen oxides (NO _x ) only affects the new diesel engines, the decrease in emissions will be seen parallel with the fleet renewal. Globally internalized limits will turn NO _x emissions to decrease with moderate traffic growth. However, by designating the Baltic Sea and the North Sea as NO _x emission control areas, more drastic decrease would occur. CO₂ emissions will stay almost constant through the studied timeline. Results show that European Commission's CO₂ target for 2050 will not be reached without implementation of market based measures among the North Sea and the Baltic Sea fleets. Results present new information for decision makers to further develop international regulations of shipping especially in the Baltic Sea and the North Sea.     

Climate change projections for variables affecting road networks in Europe

Global climate change will affect road networks during this century. The effects will be different in various parts of the world due to differences in local climate change and in the structure and properties of roads. In this paper, climate change projections are presented for climate variables that are most likely to affect the long-term performance of road networks in Europe. We apply four regional climate simulations up to the year 2100 using two plausible future emission scenarios. The results show that the changing climate will require significant adaptation measures in the near future in order to maintain the operability of the European road network.     

Brake Valve Timing and Fuel Injection: a Unified Engine Torque Actuator for Heavy-Duty Vehicles

A unified engine torque actuator for heavy-duty vehicles is developed in this paper. Based on averaging and identification of the instantaneous torque response for changes in brake valve timing and fuel flow, we derive a control oriented engine model of a six cylinder, 350 Hp turbocharged diesel engine, equipped with a compression brake. This work bridges the gap between the detailed compression crank angle based models developed in the engine design community, and the first order lag representation of diesel engine torque response used in the vehicle dynamics community. Moreover, we integrate the compression brake actuator with the service brakes and design a PI-controller that emulates the driver's actions during long descends on grades. The controller simply uses the engine speed measurement to activate the service brakes only when needed.