Experimental study on a model azimuthing podded propulsor in ice

The objective of this study was to investigate the performance of a model azimuthing podded propulsor in ice-covered water. Model tests were carried out with two different depths of cut into the ice (15 and 35 mm), two different ice conditions (presawn and pack ice conditions), and four different azimuthing angles. The depth of cut is the maximum penetration depth of the propeller blade into the ice block. The 0.3-m-diameter model propeller was operated in a continuous ice milling condition. Ice loads were measured by several sensors which were installed in various positions on the model. Six one-axis pancake-style load cells on the top of the model measured the global loads and two six-component dynamometers were installed on the shaft to measure the shaft loads. One six-component dynamometer was attached to the one of the propeller blades inside the hub to measure the blade loads. The pod unit and propeller performance in ice are presented. Ice-related loads, which were obtained when the blade was inside the ice block, are introduced and discussed. During the propeller–ice interaction, a blade can experience the path generated by the previous blade, which is called the shadowing effect. The effects of shadowing, depth of cut, azimuthing angle, and advance coefficient on propulsor performance are presented and discussed.     

Ergonomic and biomechnical analysis of automotive general assembly using XML and digital human models

Automotive general assembly requires many manual assembly operations to be carried out by human workers. Ergonomic analysis is an important part of the design and evaluation of products, jobs, tools, machines and environments for safe, comfortable and effective human functioning. Most recent researches have involved the evaluation of working conditions to prevent work-related musculoskeletal disorders. The majority of previous research on automotive companies has mainly considered the results of ergonomic analyses such as RULA (Rapid Upper Limb Assessment), REBA (Rapid Entire Body Assessment) and OWAS (Ovako Working Posture Analysis System). Analysis of static posture including reachability, clearances for arm, hand and tool has also been used to evaluate working conditions. However, in addition to static posture analysis, a biomechanical analysis in dynamic conditions should also be conducted. There are no integrated frameworks or standard schema for ergonomic analysis using digital human models in digital environments. The purpose of this paper is to propose a new framework for the evaluation of working conditions by ergonomic and biomechanical analysis using digital models based on XML standard schema, including: products, processes, manufacturing resources and human workers. This paper presents the analysis results using the proposed framework for automotive general assembly operations. We propose a new framework for the evaluation of the assembly operations and their environments. Then we apply a digital human model to the dynamic simulation of general automotive assembly operations based on standard schemas in XML and PPRH (Product, Process, Resource and Human). Using PPRH information based on a standard XML schema to analyze the ergonomic and biomechanical results, the engineer can visualize, analyze and improve assembly operations and working environments in automotive general assembly shops using digital models.     

Fatigue life prediction of a rubber material based on dynamic crack growth considering shear effect

This paper suggests a fatigue life calculation method (A fatigue life calculation method is suggested) for rubber components based on the dynamic crack growth considering shear effect. Dynamic tearing tests were carried out, and the crack length was measured using an optical microscope to calculate the dynamic crack growth rate which characterizes and determines the fatigue life. The algorithm was numerically implemented in finite element code, ABAQUS standard, by using the user subroutine and applied to several rubber components. In the finite element analysis, deformation mode of an element was classified into tension and shear, and a weighting factor was multiplied to a strain energy density according to the degree of shear strain. Tension and compression of an elliptic dumbbell specimen was simulated in order to verify the material parameters of the suggested fatigue life prediction equation and to enhance the reliability of the algorithm. Finally, the fatigue life of a vehicle suspension bushing was calculated and compared with test. There were good agreements in the failure location and the magnitude of the fatigue life.     

Port economic impact model (PIM) and its planning applications

The provision of adequate port capacity has been essential for Korean economic development, as its foreign trade has been predominantly seaborne. In this respect, efforts have been directed to the development of seaports in order to provide a sufficient level of service for greater national control of foreign trade. The port planning and development process in Korea, however, has not been a total success. This is underlined by the fact that the seaport industry in Korea has not coped with the increased demand, and total seaport capacity has lagged behind need. This paper examines the validity of the port input-output model (PIM) as predictive tool to future planning. Further the value of the PIM as a forecasting tool to the port transport industry in Korea is identified.     

Optimal Design for the Rear-Glass Joint of an Automobile for Squeak and Rattle Noise Reduction

Ever since vehicle noise, vibration, and harshness (NVH) reduction technology made dramatic improvements, vehicle interior noises represented by Squeak and Rattle (S/R) becomes an ever more important factor to improve the emotional quality of vehicles. Generally, people detect S/R noises on automotive interior parts, brake system, suspension, Body in White (BIW), etc. Among them, the rear-glass joint is a major source for vehicle interior noise, and can cause S/R noises under a variety of environmental and driving conditions. This study uses, two approaches, experimental and numerical approaches, to define the cause of S/R noise at the rear-glass section. Based on these two approaches, this study confirms that S/R noises generate through the contact between bottom side of molding and BIW. The sealant penetration length, panelmolding distance, and sealant width are the parameters affecting noise generation. In addition, this study created an optimal design with Design of Experiments (DOE) of the rear-glass joint. The design maximized the sealant penetration length, which is a parameter that majorly affects noise. The optimal design comprises of two steps: sealant injections shape optimization and rear-glass joint parameter optimization. Each step is carried out with FEA and validated by sealant penetration experiments. Through these optimizations, this study obtained an optimum combination of design parameters and fignificantly reduced the noise generated by rear-glass section.     

Requirement-based testing of an automotive ECU considering the behavior of the vehicle

HILS (Hardware In the Loop Simulation) and RBT (Requirement-Based Testing) are widely used to evaluate the performance and reliability of automotive ECUs (Electronic Control Units). The HILS method is used to predict the behavior of ECU-installed vehicles and to evaluate the performance of ECU controllers. RBT evaluates whether the embedded system satisfies the pre-defined requirements. In this study, the behavior of a vehicle is regarded as a system requirement, and an embedded system test procedure that evaluates the system requirement is proposed. In particular, a new method is introduced, which integrates HILS with RBT. Using the proposed method, the behavior of an articulated vehicle equipped with an AWS (All Wheel Steering) ECU is evaluated with RBT software.     

The impact of port operations on efficient ship operation from both economic and environmental perspectives

Recently, shipping lines have focused on efficient ship operation, which relates to energy efficiency issues in shipping and, particularly, to operational issues such that the minimisation of fuel consumption and resulting greenhouse gas emissions. Efficient ship operation in container lines is closely related to the ship’s time at sea and ship’s time in port. Reduction in port time, thanks to high-quality port operations, allows improvement in the operational efficiency of a liner service by reducing the fuel consumption of a ship at sea and its resulting CO₂ emissions. The main goal of this article is to investigate how time in port affects efficient ship operation in terms of operating costs, CO₂ emissions and externalities. For this, as a methodology, a simulation based upon system dynamics is introduced. Major finding is that less time in port resulting from the improvement of port operations contributes to efficient ship operation in terms of operating costs, amount of CO₂ emissions and external effects in the liner shipping industry. In particular, a sensitivity analysis on efficient ship operation vis-à-vis the quality of port operation shows that bigger ships need to select highly productive calling ports that provide less time in port.     

A combined tramp ship routing,fleet deployment,and network design problem

In this paper, a tramp ship routing model of fleet deployment in a hub-and-spoke network is presented. This model simultaneously determines the selection of hubs, the assignment of spokes to hubs, the deployment of feeder-containerships as well as containership routing between spokes and spokes, hubs and spokes, and hubs and hubs. Even though some parts have been studied, this complex combination of shipping problems has never been addressed. Because the problem is NP-hard, a genetic algorithm (GA) with local search is proposed. In the algorithm, a cut-off procedure is applied to fleet deployment in a sub-route strategy. A number of randomly generated problem instances are solved by both a mathematical program and the GA with local search. A simple but realistic heuristic algorithm is also developed. Both the GA with local search and the heuristic algorithm are used to solve a number of real case instances. A comparison of the results shows the efficiency of the GA with local search. The developed model can be used as a route-decision support tool for shipping companies that provide long-haul shipping services in a hub-and-spoke network.     

Land use around suburban transit stations

Land use change in some form is cited by both supporters and critics of rapid transit deployment. This paper examines and categorizes land use around twenty stations located in suburban Washington, D.C. and San Francisco/Oakland through the use of aerial photographs and field investigations. As a case study of local economic development, it documents the land use pattern associated with two modern heavy rail, rapid transit networks — BART and METRO.Both BART and METRO impact land use around suburban stations. The primary contributors to station area development are residential and commercial developers in addition to the transportation providers themselves. The trend toward more intense development away from the regional CBD toward suburban station areas indicates a wave of influence moving into the hinterland via transit lines. While trends of land use are apparent, individual station areas seem to be dictated by local conditions such as markets, land use restrictions, accessibility, population, and physical geography.