Cyclone Mitigation Perspectives in the Islands of Bangladesh: A Case of Sandwip and Hatia Islands

Most coastal areas of the world are now at risk from natural hazards such as cyclones, storm surges, beach erosions, tsunamis, sea level rises, and so on, resulting from geological and meteorological disturbances. In Bangladesh, during premonsoon and post-monsoon periods cyclone and tidal surges are considered the most catastrophic phenomena in coastal regions, including islands. Most coastal island residents of Bangladesh have been facing cyclones for centuries. The present study establishes a comparison between two neighboring islands, Sandwip and Hatia, of the Meghna estuary with respect to disaster reaction and management. Based on a questionnaire survey and observations, the study shows that the inhabitants of Hatia are more aware of and confident in disaster management than the inhabitants of Sandwip. Residents of both islands in the Meghna estuary have established trust in the warning signals following the heavy devastation of great cyclones of 1970, 1985, 1991, and 1997. The residents of Hatia have been facing cyclones and tidal surges more frequently than the residents of Sandwip due to the island's geographical location. In addition, shelter management and relief management are better developed in Hatia than Sandwip.     

A mechanism to enhance bicycle conspicuity and visibility and increase detection distances: New insights into bicycle safety

Poor sensory conspicuity and poor visibility of bicycles are key factors that correlate strongly with bicycle-vehicle accidents. Although researchers have explored how to improve detection distances, i.e., the distances from which bicycles can be recognized by other road users, there is a dearth of research on ways to signal bicyclists' presence on the road. This study investigates how to enhance, at minimum cost, the level of visibility and sensory conspicuity of bicycles; it also considers ways to signal their presence to other road users, without necessitating any active behavior by bicyclists themselves. In the first study, the level of visibility of 6 rear-end components of bicycles was analyzed according to Adrian's model; the sensory conspicuity of these same components was analyzed via respondent perceptions in conditions of sunlight, twilight with no car headlights, twilight with car headlights, and night with car headlights. The level of visibility and sensory conspicuity of the 6 rear-end components were compared with considering angular size of the components under 4 lighting conditions. The level of visibility of the rear fender was good under sunlight and night-time conditions; in other conditions, the level of visibility was directly affected by painting the fender a silver color with reflectivity and also by the fender's angular size. However, the rear tire, among the 6 components tested, had a higher visible area when used with a short fender; it also produced rotational effects during riding conditions with no extra effort by the cyclists. In the second study, adhesive tape with specific patterns and 6 different color combinations were applied to the rear tire of a bicycle under the same lighting conditions, with the aim of creating a strong signal of the bicycle's presence for other road users. Among the 6 combinations, white stripes overlaid on the color red provide an optimal combination in terms of detection distance. The mean detection distance of white stripes on red in sunlight was 138.67 m, 94.67 m in twilight without car headlights, 94 m in twilight with car headlights, and 53.67 m at night with car headlights. In addition, this combination strongly signals the presence of the bicycle to other road users with no extra effort by the cyclists, thereby reducing the likelihood of drivers looking but failing to see bicycles. In sum, the study recommends that bicyclists install white stripes overlaid on red, in order to increase visibility and conspicuity and signal the presence of their bicycles, thereby reducing the likelihood of cyclist-vehicle collisions.     

Two-phase evaporative battery thermal management technology for EVs/HEVs

Electric vehicle’s motor draws power from battery to meet its power demand in different road profiles. Battery high discharged currents are causes of warming battery’s cells. The temperature of 40 ºC and above reduces battery life span. The rationale of fuzzy controlled evaporative battery thermal management system (EC-BThMS) development from this study is to control the battery temperature in the range of 20 ~ 40 ºC both in charging/discharging modes. The proposed system has been developed with estimating the total cooling loads and thermal behavior of the battery cells. A fuzzy controlling system has been introduced with the EC-BThMS to control the electro-compressor and the expansion valve based on the response of battery temperature sensors.A battery pack of 8.6 kWh equipped EV has been operated with 60 km/h on 0 % gradient and 40 km/h on 5 % gradient in IIUM campus while 130 km/h on 0 % gradient and 50 km/h on 3.67 % gradient in Malaysia International Formula circuit to study the battery temperature profile and percentage of battery power saving. Comparison has been made on the performance of EC-BThMS with air cooling battery thermal management system (AC-BThMS) by using same vehicle. Result shows that EC-BThMS can save energy 17.69 % more than AC-BThM 1 and 23 % more than AC-BThM 2.     

Performance measurements of a tracked vehicle system

To improve crossing ability, the most important performance factor for tracked vehicle systems operating on low-bearing capacity peats, and to minimize income losses that result from downtime and maintenance costs, a vehicle was designed in order to adapt to operating condition changes. This article describes the mobile performance of a novel vehicle with segmented rubber tracks on a low-bearing capacity peat. At an equivalent travelling speed, the novel vehicle’s tractive performance in a variable operating environment caused by changes in terrain cohesiveness and hydrodynamic responses was superior to that of the previous model. The new vehicle, which could be operated on the Sepang peat, showed a tractive effort of 42.2% of the gross vehicle weight in field experiments; the recommended minimum tractive effort is between 30 and 36% of the gross vehicle weight.     

����ģ���߼��Ľ�ͨ�źſ��Ʒ�����������ɳ�ذ�������Ӧ��ǰ��

模糊控制器的应用于1977年首次在文献中提出,其中指出对于有简单绿灯延时控制的单车道交叉口,模糊控制器比车辆感应式控制器更具优势。此后,模糊控制器有了进一步发展,关于交通信号控制的模糊逻辑方法的研究也进一步深入,该方法被陆续应用于无转向车流的双车道交叉口、无限制的单车道交叉口、多交叉口、相位顺序和相位时长控制、拥挤交叉口和路网等等,尤其在高负荷和不均衡交通流条件下表现出优于传统交通信号控制方法的特性。模糊逻辑方法可以改善自适应交通信号控制,改变自适应控制器和TMS的整个决策过程,很大程度上改善未来的交通需求管理方法,然而这类交通信号控制和交通需求管理方法的实际应用并不多见。在诸如沙特阿拉伯这样的发展中国家,学者应根据本国的特有情况研究基于模糊逻辑的交通信号控制与TMS的发展潜力,从而减少拥挤导致的各种损失。     

Examining determinants of rail ridership: a case study of the Orlando SunRail system

The current study contributes to the literature on transit ridership by considering daily boarding and alighting data from a recently launched commuter rail system in Orlando, Florida – SunRail. The analysis is conducted based on daily boarding and alighting data for 10 months for the year 2015. With the availability of repeated observations for every station, the potential impact of common unobserved factors affecting ridership variables are considered. The current study develops an estimation framework, for boarding and alighting separately, that accounts for these unobserved effects at multiple levels – station, station-week and station-day. In addition, the study examines the impact of various observed exogenous factors such as station level, transportation infrastructure, transit infrastructure, land use, built environment, sociodemographic and weather variables on ridership. The model system developed will allow us to predict ridership for existing stations in the future as well as potential ridership for future expansion sites.     

Fuzzy expert system for controlling swamp terrain intelligent air-cushion tracked vehicle

A fuzzy expert system was used in this study to control an intelligent air-cushion tracked vehicle (IACTV) as it operated in a swamp peat terrain. The system was effective in controlling the intelligent air-cushion vehicle while measuring the vehicle traction (TE), motion resistance (MR), power consumption (PC), cushion clearance height (CCH) and cushion pressure (CP). An ultrasonic displacement sensor, pull-in solenoid electromagnetic switch, pressure-control sensor, microcontroller, and battery pH sensor were incorporated into the fuzzy expert system (FES) to experimentally determine the TE, MR, PC, CCH, and CP. In this study, we provide an illustration of how an FES might play an important role in the prediction of the power consumption of the vehicle’s intelligent air-cushion system. The mean relative error in the actual and predicted values from the FES model with respect to tractive effort, total motion resistance and total power consumption were found to be 5.58 %, 6.78 % and 10.63 %, respectively. For all parameters, the relative error in the predicted values was found to be less than the acceptable limit (10%), except for the total power consumption. Furthermore, the goodness of fit of the predicted values was found to be close to 1.0 as expected and, hence, indicates the good performance of the developed system.     

桑塔纳2000GLi型轿车喷油系统故障检修

以桑塔纳2000GLi型轿车喷油系统故障为例,在深入分析喷油系统工作原理的基础上,提出发动机ECU检修的思路,从而确定了产生故障的原因是喷油芯片30373损坏。     

Investigating characteristics of cellphone distraction with significance tests and association rule mining

Due to the escalating usage of cellphones, cellphone distracted driving remains one of the fastest-growing traffic safety problems. Two basic types of cellphone distractions are – talking (handheld or hands-free) and manipulating (texting, internet browsing, using apps for social networking, navigation, entertainment, etc.). To explore the association between the cellphone distraction type and characteristics of a driver, roadway, and vehicle, we used Fisher's exact test and association rule mining to analyze the data from ten different hour-long observation sessions performed both at intersections and on straight continuous segments. Among 3727 drivers observed, 22.1% were found distracted by cellphones. More drivers were involved in manipulating (12.8%) than talking on the phone (9.3%). The Fisher's exact test results show that intersections and the presence of passengers may be significantly associated with driver distraction type. This study makes a novel attempt to utilize association rule mining in cellphone distraction observation. A set of generated rules and their network visualization demonstrated how a specific group of characteristics can be related to cellphone conversation or manipulation through the measures of support, confidence, and lift. 'Peak hour', 'Absence of passengers', and 'Urban setting' are more likely to be associated with distracted driving than other characteristics. The results from association rules revealed that male drivers were found to be predominantly involved in cellphone manipulation during peak hours on urban segments than female drivers, and they were also largely involved in cellphone conversation during peak hours on the rural segment. Female drivers engaged in manipulating cellphones at the urban intersection during both peak and off-peak hours. In the rural area during peak hours, female drivers were manipulating at the intersection and were talking while driving on the continuous segment. Drivers aged '30–60 years' were found to be more associated with cellphone use compared to '<30 years' and '>60 years' age group. 'Passenger car drivers during peak hours' were more associated with manipulating cellphones than expected compared to any other collective group, whereas 'female passenger car drivers driving on continuous segment' were strongly associated with cellphone conversation. The detailed discussion of the findings from association rule mining will be useful for targeting a specific group of relevant characteristics in potential cellphone distraction reduction strategies.     

Physical characteristics of paratransit in developing countries of Asia

Paratransit modes play a significant role in the urban transport sectors of developing countries since in many cities more than half of the total public transport demand are carried by them. Rapid increase in urban population, per capita income, along with inadequate existing transport infrastructures have stimulated their usage as cheap and convenient public transport modes. This paper examines their present role and physical characteristics in a comparative form to provide a basic data for discussion of urban transport issues in developing cities.