3洞小净距隧道围岩压力计算方法

针对3洞小净距隧道围岩压力计算问题,基于普氏平衡拱理论,将围岩压力看作单洞隧道的基本压力与相邻隧道开挖引起的附加压力之和,提出适用于3洞小净距隧道的围岩压力计算方法;根据该计算方法研究不同岩柱厚度、开挖跨度和开挖高度对围岩压力的影响规律,并将该计算方法应用于确定八达岭长城站3洞小净距隧道围岩压力。结果表明:随着岩柱厚度的增加,围岩压力不断减小,当岩柱厚度达到某一值时,围岩压力与单洞隧道相同;岩柱厚度、边洞跨度和中洞高度变化影响整体围岩压力,中洞跨度和边洞高度仅影响各自单洞围岩压力;3洞小净距隧道的最优开挖顺序为"先边洞、后中洞",中洞围岩压力大于边洞,应力值最大点为中洞顶部。施工中应注意中洞围岩稳定,采取有效的措施对岩柱区域进行加固。     

Comparison on travel scheduling between driving and walking trips by habitual car users

Research on walking behavior has become increasingly more important in the field of transportation in the past decades. However, the study of the factors influencing the scheduling decisions related to walking trips and the exploration of the differences between travel modes has not been conducted yet. This paper presents a comparison of the scheduling and rescheduling decisions associated with car driving trips and walking trips by habitual car users using a data set collected in Valencia (Spain) in 2010. Bivariate probit models with sample selection are used to accommodate the influence of pre-planning on the decision to execute a travel as pre-planned or not. The explicative variables considered are: socio-economic characteristics of respondents, travel characteristics, and facets of the activity executed at origin and at destination including the scheduling decisions associated with them. The results demonstrate that a significant correlation exists between the choices of pre-planning and rescheduling for both types of trips. Whether for car driving or walking trips, the scheduling decisions associated with the activity at origin and at destination are the most important explicative factors of the trip scheduling and rescheduling decisions. However, the rescheduling of trips is mainly influenced by modifications in the activity at destination. Some interesting differences arise regarding the rescheduling decision processes between travel modes: if pre-planned, walking trips are less likely to be modified than car driving trips, showing a more rigid rescheduling behavior.     

An assessment of port reform in Argentina: outcomes and challenges ahead

During the 1990s Argentina engaged in a process of restructuring and deregulation of its ports. The main objective of the reform was to increase efficiency and service quality and to reduce the size and role of the public sector in ports. Overall, it was expected to allow the transport sector to adjust its capacity to demand changes and to facilitate international trade while contributing to the reduction of the fiscal burden of this sector. This paper shows that the reform caused significant efficiency gains, allowing a 50% drop in container terminal handling price within five years in the most important ports. The paper also identifies outstanding issues that could impact the long-run sustainability of the gains achieved. Among these issues, emphasis is given to recent horizontal and vertical mergers in the Port of Buenos Aires and their consequences in terms of actual competition and access regulation.     

A study of the environmental impacts of intelligent automated vehicle control at intersections via V2V and V2I communications

This article presents a novel intersection traffic management system for automated vehicles and quantifies its impact on fuel consumption and greenhouse gas emissions of CO₂ relative to traditional traffic signal and roundabout intersection control. The developed intelligent traffic management (ITM) techniques, which are based on a spatiotemporal reservation scheme, ensure that vehicles proceed through the intersection without colliding with other vehicles while at the same time reducing the intersection delay and environmental impacts. Specifically, the spatiotemporal reservation scheme provides each vehicle a collision-free path that is decomposed into a speed profile along with navigational instructions. The integration of the developed microscopic traffic simulator with instantaneous emission model, provides improved assessments of the environmental impact of traffic control strategies at intersections. The simulator architecture integrates several ITM algorithms, vehicle sensors, V2V/V2I communications, and emission and fuel consumption models. Each vehicle is modeled by an agent and each agent provides information depending on the specific vehicle sensors. The ITM system is supported by V2V and V2I communications, allowing the exchange of information among vehicles and infrastructure. The data include the estimated vehicle position and speed. Compared with traditional traffic management techniques, the simulation results prove that the proposed ITM system reduces CO₂ emissions significantly. The research also shows that these reductions are more significant when the traffic flow increases.     

The external cost of speed at sea: An analysis based on selected short sea shipping routes

According to the mid-term review of the EU White Paper on Transport, Short Sea Shipping (SSS) is expected to grow at a rate of 59% (metric tonnes) between 2000 and 2020. If we consider that the overall expected increase in both freight exchanges and volume is 50%, sea transport is one of the most feasible alternatives to reduce traffic congestion on European roads. Maritime transportation may compete with road transport as far as certain traffics are concerned, but only when assuming external costs. This paper analyzes several intermodal transport chains involving a sea leg by comparing the effect of pollutant emissions from different ship types and road transport in terms of potential external cost savings. The translation of these emissions into environmental costs shows, for certain conditions, savings in the case of sea transport that would justify the use of an environmental bonus to promote the sea option.     

基于TruckSim的客车行驶安全因素研究

一些行驶的车辆在一些紧急情况下可能会因为驾驶员对路面情况判断失误而导致交通事故的发生,客车相对于一些小型车辆来说重心高,稳定性相对较低,在路面上行驶安全性也相对较低,可能会出现侧滑、甩尾现象。文章研究客车行驶的稳定性,通过TruckSim软件对客车进行建模仿真,得到客车在不同道路条件路面上行驶时的试验性能曲线,分析影响客车的安全因素,有助于帮助驾驶员在安全地行驶速度下运行,提高客车安全性。     

Quantitative estimation of the influence of surface thermal fronts over chlorophyll concentration at the Patagonian shelf

Eighteen-year (1985–2002) mean monthly SST Pathfinder data with 9 km spatial resolution have been used to estimate surface gradients by finite differences. Then the seasonal climatological means have been calculated from the intensity of these gradients, and surface thermal fronts present in the Patagonian Continental Shelf (PCS) have been located. Moreover, 6 years (1998–2003) of SeaWiFS data with approximately 4 km spatial resolution have been used to estimate monthly composite images of surface chlorophyll concentration, after which seasonal climatological means distributions have been generated. Both seasonal distributions have been analyzed together and by combining the knowledge of oceanographic processes and phytoplankton responses to light and nutrient availability, regions where the presence of a thermal front affects photosynthetic activity have been identified. Subjective criteria have been applied to define eighteen areas where phytoplankton biomass is influenced by the presence of a thermal front. In these areas, the surface chlorophyll (spatial mean and total), its relationship with the surface chlorophyll of the whole region, and the seasonal evolution of this relationship have been calculated. All frontal areas cover less than 15% of the total surface, but they contribute with over 23% of the phytoplankton annual mean biomass. Considered as a group, during summer they show high chlorophyll values very similar to those in spring. During the cold period, when the water column is vertically mixed in practically the whole of PCS, the influence of physical fronts over the biological production is minimum. The frontal zone image remains clearly defined during summer, when approximately 85% of the area will have a determined mean chlorophyll concentration, while the other 15% has a 2.45 times larger value. While three pattern trends have been identified in the frontal areas, only two of them condition the pattern of the group, due to their horizontal extension.     

Modeling household interactions in daily in-home and out-of-home maintenance activity participation

The activity travel patterns of individuals in a household are inter-related, and the realistic modeling of activity-travel behavior requires that these interdependencies be explicitly accommodated. This paper examines household interactions impacting weekday in-home and out-of-home maintenance activity generation in active, nuclear family, households. The in-home maintenance activity generation is modeled by examining the duration invested by the male and female household heads in household chores using a seemingly unrelated regression modeling system. The out-of-home maintenance activity generation is modeled in terms of the decision of the household to undertake shopping, allocation of the task to one or both household heads, and the duration of shopping for the person(s) allocated the responsibility. A joint mixed-logit hazard-duration model structure is developed and applied to the modeling of out-of-home maintenance activity generation. The results indicate that traditional gender roles continue to exist and, in particular, non-working women are more likely to share a large burden of the household maintenance tasks. The model for out-of-home maintenance activity generation indicates that joint activity participation in the case of shopping is motivated by resource (automobiles) constraints. Finally, women who have a higher propensity to shop are also found to be inherently more efficient shoppers.     

Motorcycle fatalities in Malaysia

Malaysia has the highest road fatality risk (per 100,000 population) among the ASEAN countries and more than 50% of the road accident fatalities involve motorcyclists. This study has collected and analysed data from the police, government authorities, and national and international research institutes. Only fatality data are used due to the severe underreporting of severe injuries (up to 600%) and slight injuries (up to 1400%). The analysis reveals that the highest numbers of motorcycle fatalities occur in rural locations (61%), on primary roads (62%) and on straight road sections (66%). The majority are riders (89%), 16 to 20 years old (22.5%), and 90% of the motorcycles are privately owned. Of those involved in fatal accidents, 75% of the motorcyclists wear helmets, and 35% do not have proper licences. The highest number of fatalities by type of collision is ‘angular or side’ (27.5%). Although fatal motorcyclist crashes mostly involve ‘passenger cars’ (28%), motorcyclists are responsible for 50% of the collisions either by crashing singly (25%) or with other motorcyclists (25%). While male motorcyclists predominate (94% of fatalities), female motorcyclists aged 31 to 70, possessing ‘no licence’, not wearing helmets and travelling during the day, account for a higher percentage than male motorcyclists. Malaysia must acquire more motorcycle exposure data and establish an injury recording system and database based on hospital-records. To reduce motorcycle fatalities, it first has to understand why young male motorcyclists are prone to fatal crashes in the evenings and on weekends on rural primary roads, especially on straight road sections.