Water Wave Scattering by a Nearly Circular Cylinder Submerged Beneath an Ice-cover

Assuming linear theory, the two-dimensional problem of water wave scattering by a horizontal nearly circular cylinder submerged in infinitely deep water with an ice cover modeled as a thin-elastic plat...     

双通线加热的热力学及实验分析(英文)

The present investigation deals with process analysis of oxy-acetylene flame assisted double pass line heating for varying plate thickness. oxy-acetylene flame as the heat source for multi pass line heating to achieve 3-D bending of plates with varying thicknesses was studied. The oxy-acetylene flame was modeled as the moving heat source in the FEM analysis. The transient thermal histories were predicted taking into account the temperature dependent thermo-mechanical properties. A comparative study between single pass and double pass line heating residual deformation was also carried out. The temperature distribution and residual deformations predicted by the numerical model developed in the present work compared fairly well with those of the experimental ones.     

Optimal linear phase finite impulse response band pass filter design using craziness based particle swarm optimization algorithm

An efficient method is proposed for the design of finite impulse response (FIR) filter with arbitrary pass band edge, stop band edge frequencies and transition width. The proposed FIR band stop filter is designed using craziness based particle swarm optimization (CRPSO) approach. Given the filter specifications to be realized, the CRPSO algorithm generates a set of optimal filter coefficients and tries to meet the ideal frequency response characteristics. In this paper, for the given problem, the realizations of the optimal FIR band pass filters of different orders have been performed. The simulation results have been compared with those obtained by the well accepted evolutionary algorithms, such as Parks and McClellan algorithm (PMA), genetic algorithm (GA) and classical particle swarm optimization (PSO). Several numerical design examples justify that the proposed optimal filter design approach using CRPSO outperforms PMA and PSO, not only in the accuracy of the designed filter but also in the convergence speed and solution quality.     

具有惯性表面的两层流体的柯西-泊松问题(英文)

This paper is concerned with the generation of waves due to initial disturbances at the upper surface of a two-layer fluid, as the upper layer is covered by an inertial surface and the lower layer extends infinitely downwards. The inertial surface is composed of thin but uniform distribution of non-interacting material. In the mathematical analysis, the Fourier and Laplace transform techniques have been utilized to obtain the depressions of the inertial surface and the interface in the form of infinite integrals. For initial disturbances concentrated at a point, the inertial surface depression and the interface depression are evaluated asymptotically for large time and distance by using the method of stationary phase. They are also depicted graphically for two types of initial disturbances and appropriate conclusions are made.     

12毫米厚铝合金板的搅拌摩擦焊研究(英文)

Most of the investigations regarding friction stir welding(FSW)of aluminum alloy plates have been limited to about 5 to 6mm thick plates.In prior work conducted the various aspects concerning the process parameters and the FSW tool geometry were studied utilizing friction stir welding of 12 mm thick commercial grade aluminum alloy.Two different simple-tomanufacture tool geometries were used.The effect of varying welding parameters and dwell time of FSW tool on mechanical properties and weld quality was examined.It was observed that in order to achieve a defect free welding on such thick aluminum alloy plates,tool having trapezoidal pin geometry was suitable.Adequate tensile strength and ductility can be achieved utilizing a combination of high tool rotational speed of about 2000 r/min and low speed of welding around 28 mm/min.At very low and high dwell time the ductility of welded joints are reduced significantly.     

水火弯板残余变形预报的数值和量纲分析(英文)

Line heating process is a very complex phenomenon as a variety of factors affects the amount of residual deformations. Numerical thermal and mechanical analysis of line heating for prediction of residual deformation is time consuming. In the present work dimensional analysis has been presented to obtain a new relationship between input parameters and resulting residual deformations during line heating process. The temperature distribution and residual deformations for 6 mm, 8 mm, 10 mm and 12 mm thick steel plates were numerically estimated and compared with experimental and published results. Extensive data generated through a validated FE model were used to find co-relationship between the input parameters and the resulting residual deformation by multiple regression analysis. The results obtained from the deformation equations developed in this work compared well with those of the FE analysis with a drop in the computation time in the order of 100 (computational time required for FE analysis is around 7 200 second to 9 000 seconds and where the time required for getting the residual deformation by developed equations is only 60 to 90 seconds).     

Wave scattering by undulating bed topography in a two-layer ocean

The problem of wave scattering by undulating bed topography in a two-layer ocean is investigated on the basis of linear theory. In a two-layer fluid with the upper layer having a free surface, there exist two modes of waves propagating at both the free surface of the upper layer and the interface between the two layers. Due to a wave train of a particular mode incident on an obstacle which is bottom-standing on the lower layer, reflected and transmitted waves of both modes are created by the obstacle. For small undulations on the bottom of the lower layer, a perturbation method is employed to obtain first-order reflection and transmission coefficients of both modes for incident wave trains of again both modes in terms of integrals involving the bed-shape function. For sinusoidal undulations, numerical results are presented graphically to illustrate the energy transfer between the waves of different modes by the undulating bed. U. BASU was born in 1949. She is a professor in the Department Applied Mathematics, Calcutta University, India. Her current research interests include water wave problems, continuum mechanics, etc.     

响应面法模拟轴肩和搅拌针形状对铝合金搅拌摩擦的影响(英文)

The present paper discusses the modeling of tool geometry effects on the friction stir aluminum welds using response surface methodology. The friction stir welding tools were designed with different shoulder and tool probe geometries based on a design matrix. The matrix for the tool designing was made for three types of tools, based on three types of probes, with three levels each for defining the shoulder surface type and probe profile geometries. Then, the effects of tool shoulder and probe geometries on friction stirred aluminum welds were experimentally investigated with respect to weld strength, weld cross section area, grain size of weld and grain size of thermo-mechanically affected zone. These effects were modeled using multiple and response surface regression analysis. The response surface regression modeling were found to be appropriate for defining the friction stir weldment characteristics.     

大型加强板结构焊接顺序的效果研究(英文)

Welding sequence has a significant effect on distortion pattern of large orthogonally stiffened panels normally used in ships and offshore structures. These deformations adversely affect the subsequent fitup and alignment of the adjacent panels. It may also result in loss of structural integrity. These panels primarily suffer from angular and buckling distortions. The extent of distortion depends on several parameters such as welding speed, plate thickness, welding current, voltage, restraints applied to the job while welding, thermal history as well as sequence of welding. Numerical modeling of welding and experimental validation of the FE model has been carried out for estimation of thermal history and resulting distortions. In the present work an FE model has been developed for studying the effect of welding sequence on the distortion pattern and its magnitude in fabrication of orthogonally stiffened plate panels.     

有限水深中垂直下潜弹性薄板的水波散射(英文)

The problem of water wave scattering by a thin vertical elastic plate submerged in uniform finite depth water is investigated here.The boundary condition on the elastic plate is derived from the Bernoulli-Euler equation of motion satisfied by the plate.Using the Green’s function technique,from this boundary condition,the normal velocity of the plate is expressed in terms of the difference between the velocity potentials(unknown)across the plate.The two ends of the plate are either clamped or free.The reflection and transmission coefficients are obtained in terms of the integrals’involving combinations of the unknown velocity potential on the two sides of the plate,which satisfy three simultaneous integral equations and are solved numerically.These coefficients are computed numerically for various values of different parameters and depicted graphically against the wave number in a number of figures.