Organic carbon budget for the Gulf of Bothnia

We calculated input of organic carbon to the unproductive, brackish water basin of the Gulf of Bothnia from rivers, point sources and the atmosphere. We also calculated the net exchange of organic carbon between the Gulf of Bothnia and the adjacent marine system, the Baltic Proper. We compared the input with sinks for organic carbon; permanent incorporation in sediments and mineralization and subsequent evasion of CO₂ to the atmosphere. The major fluxes were riverine input (1500 Gg C year^− 1), exchange with the Baltic Proper (depending on which of several possible DOC concentration differences between the basins that was used in the calculation, the flux varied between an outflow of 466 and an input of 950 Gg C year^− 1), sediment burial (1100 Gg C year^− 1) and evasion to the atmosphere (3610 Gg C year^− 1). The largest single net flux was the emission of CO₂ to the atmosphere, mainly caused by bacterial mineralization of organic carbon. Input and output did not match in our budget which we ascribe uncertainties in the calculation of the exchange of organic carbon between the Gulf of Bothnia and the Baltic Proper, and the fact that CO₂ emission, which in our calculation represented 1 year (2002) may have been overestimated in comparison with long-term means. We conclude that net heterotrophy of the Gulf of Bothnia was due to input of organic carbon from both the catchment and from the Baltic Proper and that the future degree of net heterotrophy will be sensible to both catchment export of organic carbon and to the ongoing eutrophication of the Baltic Proper.     

Influence of AC system design on the realisation of tractive efforts by high adhesion locomotives

The main task for heavy haul railway operators is to reduce the cost of exported minerals and enhance the long-term viability of rail transport operations through increasing productivity by running longer and heavier trains. The common opinion is that this is achievable by means of implementation of high adhesion locomotives with advanced AC traction technologies. Modern AC high adhesion locomotives are very complex mechatronic systems and can be designed with two alternative traction topologies of either bogie or individual axle controls. This paper describes a modelling approach for these two types of AC traction systems with the application of an advanced co-simulation methodology, where an electrical system and a traction algorithm are modelled in Matlab/Simulink, and a mechanical system is modelled in a multibody software package. Although the paper concentrates on the analysis of the functioning for these two types of traction control systems, the choice of reference slip values also has an influence on the performance of both systems. All these design variations and issues have been simulated for various adhesion conditions at the wheel–rail interface and their influence on the high traction performance of a locomotive equipped with two three-axle bogies has been discussed.     

The design of liner shipping serives: the problem of feeder services versus multi-port-calls

In this paper, the authors outline the structure of liner shipping systems with special emphasis on the question of whether feeder services are superior in economic terms to the more traditional and commonly-used multi-port-calling system. They describe the theoretical advantages of the former over the latter, and develop a model by which the optimal conditions both operate in may be determined. This model is then applied to a real situation to ascertain whether the theory works in practice. They conclude that the shuuttle/feeder system is worthwhile only in exceptional circumstances when specific route characteristics—low trade density; hinterland generated cargo; inland position of port; and heavy congestion—coexist. Despite the expense of multi-port-calling, it remains the most practical solution to the thin trade problem.     

Inhalable railroad particles at ground level and subterranean stations - Physical and chemical properties and relation to train traffic

The paper compares PM10 concentrations in railroad environments with EU air quality standards and characterizes particle concentrations and particle properties in relation to train traffic. The results show that PM10 concentrations in ground-level railroad environments do not exceed the EU directive 24-h limit value, while on the platforms of the two subterranean stations PM10 concentrations were far above the outdoor limit value. Diurnal and weekly patterns in PM10 concentration could be identified, co-varying with train traffic intensity. The particle mass size distribution peaked at around 2-6 μm. The elemental composition of PM10 at the subterranean stations was dominated by Fe.     

Risk and reward in public transportation contracting

The workshop discusses and documents a number of countries’ experiences regarding risk and reward in the delivery of public transport and determines the way in which competitive pressures actually work (or not) to deliver efficient and effective services. Papers are grouped into three main themes, i.e., public versus private management; negotiated versus competitively tendered contracts; and measures to improve performance. This chapter begins with a brief overview of each of the eight papers. This is followed by a section that out the discussions that emanated from the papers. Finally, the main policy and research recommendations are presented.     

Trends in vehicle motion control for automated driving on public roads

ABSTRACT

In this paper, we describe how vehicle systems and the vehicle motion control are affected by automated driving on public roads. We describe the redundancy needed for a road vehicle to meet certain safety goals. The concept of system safety as well as system solutions to fault tolerant actuation of steering and braking and the associated fault tolerant power supply is described. Notably restriction of the operational domain in case of reduced capability of the driving automation system is discussed. Further we consider path tracking, state estimation of vehicle motion control required for automated driving as well as an example of a minimum risk manoeuver and redundant steering by means of differential braking. The steering by differential braking could offer heterogeneous or dissimilar redundancy that complements the redundancy of described fault tolerant steering systems for driving automation equipped vehicles. Finally, the important topic of verification of driving automation systems is addressed.     

Cultural heritage connectivity. A tool for EIA in transportation infrastructure planning

The paper is concerned incorporating landscapes’ ecological and cultural values in infrastructure planning. We focus on cultural heritage connectivity in the context of environmental impact statements in transportation infrastructure planning. Using a case study from south-central Sweden cultural heritage indicators from maps were defined, and a GIS-based automated search tool is developed for analysing cultural heritage connectivity from an antiquarian perspective. Analyses of cultural heritage connectivity can inform about the historical and/or present function of the landscape and its social and economic conditions. While this type of connectivity can be searched out using information from maps, a difficulty lies in communicating the knowledge in an interesting way to non-experts.     

Rail infrastructure charging EU-directive,Swedish concerns and theory

The first railway package is being recast by the legislative bodies of the European Union. One point of departure in this paper is how Swedish agencies treat issues concerning marginal cost based charges, financing charges and allocation of scarce capacity and it discusses these issues from a welfare point of view, partly by use of theoretical modelling. It is seen here that the Swedish infrastructure manager (the Swedish Transport Administration) so far has no method for calculation of marginal costs as a base for charging, especially for costs of scarce capacity, and that the infrastructure manager is applying or discussing various methods for allocations of scarce track capacity. The EU-recast gives no guidance on principles for calculation of charges for scarce capacity, so we recommend the Swedish Transport Administration to develop such charges. The Administration seems to ignore important externalities that should be taken into consideration from a welfare point of view, with respect both to efficient charging and to allocation of scarce capacity. The analytical modelling part of the paper aims to derive these charges in principle, taking these externalities into account. If financing charges exceeding social marginal costs are applied, the model shows how to minimise the welfare loss of these increases. It also shows that financing charges should primarily be applied to market segments that cause large external costs from the operation of the train, where its customers have low valuation of wait time and delay time, where customers of other segments have high valuations of delay and where increased profits for other operators are induced.     

An algorithm for combining autonomous vehicles and controlled events in driving simulator experiments

Autonomous vehicles can be used to create realistic simulations of surrounding vehicles in driving simulators. However, the use of autonomous vehicles makes it difficult to ensure reproducibility between subjects. In this paper, an effort is made to solve the problem by combining autonomous vehicles and controlled events. A controlled event can be compared to a theatre play. The aim is to achieve the same initial play conditions for each subject, which can be problematic since the traffic situation around the subject will be dependent upon each subject’s actions while driving in autonomous traffic. This paper presents an algorithm that achieves the transition from autonomous traffic to a predefined start condition for a play. The algorithm has been tested in the Swedish National Road and Transport Research Institute (VTI) driving simulator III with promising results. In most of the cases we examined the algorithm could reconstruct the specified start condition and conduct the transition from autonomous to controlled mode in a inconspicuous way. Some problems were observed regarding moving unwanted vehicles away from the closest area around the simulator vehicle, and this part of the algorithm has to be enhanced. The experiment also showed that the subjects drove faster in the presence of controlled everyday life traffic normally used in the VTI driving simulator than in autonomous traffic.     

Public transport policy for central-city travel in the light of recent experiences of congestion charging

Excellent public transport which makes the private car a minority mode of central-city travel is a necessary condition for a political process towards the introduction of congestion charges. However, the charging system costs in London and Stockholm have proved to be unexpectedly high. Therefore, before these costs come down to an affordable level, zero-fares for central-city travel and stricter parking policy would be a first-best combination in many cities, always provided that the public transport is really competitive. A bold venture in public transport development is consequently the top priority irrespective of the transport pricing policy direction.