Fuzzy Control of Clutch Engagement for Automated Manual Transmission

This paper presents a fuzzy control system for the clutch engagement of an automated manual transmission. The servomechanism is assembled with a three-port pneumatic pressure-proportional valve and a position-sensing cylinder which control the release-lever displacement of 25 mm within the position preciseness of 0.1 mm against maximum spring load of 2kN. The fuzzy system is skillful to estimate the driver's will from the accelerator pedal operation. The servomechanism is mounted on a commercial vehicle with 4-ton pay-load. The system parameters are set up by bond graphs simulation and empirical performance tests are carried by using an oil-hydraulically operated engine-vehicle testing rig with a maximum torque capacity of 400 Nm.     

Experimental study on elastic behaviors of two tandem risers in constant flow

Journal of Marine Science and Technology - Multiple pipes bundled with a certain distance are used for deep ocean development for such as lifting seafloor massive sulfides (SMS), pumping up a large...     

A methodology to increase driver trust in rear-obstacle warning systems with imperfect sensing results — Proposal for a warning system using sensor reliability information

Driver's workload tends to be increased during driving under complicated traffic environments like lane-changing operation. In such cases, rear collision warning is effective for reduction of cognitive workload. On the other hand, it is pointed out that false alarm or missing alarm caused by sensor errors leads to decrease of driver trust in the warning system and it can result in low efficiency of the system. Suppose that sensor reliability information is provided in real-time. In this paper, we propose a novel warning method to increase driver trust in the system even with low sensor reliability by utilizing sensor reliability information. We investigate the effectiveness of the warning methods in high and low workload situations by driving simulator experiments.     

波浪中船体梁后极限强度特性的实验评估(英文)

Experimental investigations into the collapse behavior of a box-shape hull girder subjected to extreme wave-induced loads are presented.The experiment was performed using a scaled model in a tank.In the middle of the scaled model,sacrificial specimens with circular pillar and trough shapes which respectively show different bending moment-displacement characteristics were mounted to compare the dynamic collapse characteristics of the hull girder in waves.The specimens were designed by using finite element(FE)-analysis.Prior to the tank tests,static four-point-bending tests were conducted to detect the load-carrying capacity of the hull girder.It was shown that the load-carrying capacity of a ship including reduction of the capacity after the ultimate strength can be reproduced experimentally by employing the trough type specimens.Tank tests using these specimens were performed under a focused wave in which the hull girder collapses under once and repetitive focused waves.It was shown from the multiple collapse tests that the increase rate of collapse becomes higher once the load-carrying capacity enters the reduction path while the increase rate is lower before reaching the ultimate strength.     

Verification process and its application to network traffic simulation models

This paper summarizes a standardized verification process for network traffic simulation models. After the general introduction of philosophy of verification, we explain detailed processes of the verification and its application to several well‐known simulation models. “Verification” here means several examination tests of simulation models using virtual data on a simple network so as to confirm their fundamental functions. In the course of model development, the developers have to examine whether the model performance is consistent with the specifications that they intend and also with the well‐authorized traffic engineering theory. Because of several constraints in putting the model specifications into the computer programming such as discretizing of time and space and simplifying vehicle behaviors to some degree, the intended model specifications may not be fully achieved in a computer. Therefore, we strongly recommend the verification before applying the models to a real network.     

Outline of scientific ocean drilling and specifications of riser drilling vessel Chikyu

 The Japan Marine Science and Technology Center (JAMSTEC) has been, and is now promoting the “OD21” program (i.e., “Ocean drilling in the 21st century”). This is the first plan in the world to utilize deep-water riser-drilling technologies for scientific drilling. One of the important factors for the success of this program is the development of a high-performance drilling vessel. Since 1990, JAMSTEC has been continuing a technological study of a riser-drilling vessel for scientific studies with an operational capability in waters up to 4000 m deep. It was decided to start the construction with a two-phase plan: a vessel with a riser operation for waters up to 2500 m deep will be constructed in the initial stage, and then the vessel will be modified to a 4000-m depth capability. In the development process of the vessel, named Chikyu, many new technical developments have taken place, such as drilling/coring equipment, a dynamic positioning system, etc. Thus, the Chikyu is expected to contribute to ocean engineering and other work, in addition to scientific advances. Received: June 15, 2002 / Accepted: November 11, 2002 Address correspondence to: Y. Yano (e-mail: yanoy@jamstec.go.jp)