GIS-based identification and visualization of multimodal freight transportation catchment areas

Transportation - To estimate impacts, support cost–benefit analyses, and enable project prioritization, it is necessary to identify the area of influence of a transportation infrastructure...     

安中机械(深圳)物流设备制造公司前行在汽车尾板制造业道路上

在国内尾板制造行业中,安中机械(深圳)物流设备制造公司(以下简称安中机械)称得上是元老级的企业。这个建于1965年的老厂,在2003年进行改制,可渭是“老树换新颜”,这棵经历改制之后的“老树”将如何发展?安中机械(深圳)公司总经理雷养民为记者讲述了该公司的发展足迹。     

浅谈集装箱货物发生残损、短缺的类型与责任归属

集装箱在运输装卸过程中货物时有残损、短缺发生。为了便于现场检验鉴定人员、理货人员、保险理赔人员以及收发货人判明货物的残损、短缺的类型,区分其原因,明确责任归属;同时也便于收发货人或代理人找到责任方,提出索赔、挽回损失,现就集装箱货物的残损、短缺的判别方法、类型、责任归属及其检验鉴定证书的作用作一探讨。     

On the Design and Development of a Magneto-Rheological Mount

This paper evaluates the performance of a Magneto-Rheological (MR) mount. The mount incorporates MR fluid in a conventional fluid mount to open and close an inertia track between the fluid chambers of the mount. It is shown that such switching of the inertia track improves the mount's isolation effect by eliminating the large transmissibility peak that commonly exists at frequencies larger than the notch frequency for conventional fluid mounts. The switching frequencies of the MR mount are evaluated based on the parameters of the mount. A simple control scheme for switching the mount between the open and closed states is proposed, and the performance of the controlled mount is compared with conventional mounts. A sensitivity analysis is conducted to evaluate the effect of parameter errors in estimating the switching frequencies and mount performance. The results show that the switching frequencies can be accurately determined from mount parameters that are easily measured or estimated.     

Development of railway station choice models to improve the representation of station catchments in rail demand models

ABSTRACT

This paper describes the development of railway station choice models suitable for defining probabilistic station catchments. These catchments can then be incorporated into the aggregate demand models typically used to forecast demand for new rail stations. Revealed preference passenger survey data obtained from the Welsh and Scottish Governments was used for model calibration. Techniques were developed to identify trip origins and destinations from incomplete address information and to automatically validate reported trips. A bespoke trip planner was used to derive mode-specific station access variables and train leg measures. The results from a number of multinomial logit and random parameter (mixed) logit models are presented and their predictive performance assessed. The models were found to have substantially superior predictive accuracy compared to the base model (which assumes the nearest station has a probability of one), indicating that their incorporation into passenger demand forecasting methods has the potential to significantly improve model predictive performance.     

Integrated approach to an optimal automotive timing chain system design

Ensuring engine efficiency is a crucial issue for automotive manufacturers. Several manufacturers focus on reducing the time taken to develop and introduce brand new vehicles to the market. Thus, a synergic approach including various simulations is generally adopted to achieve a development schedule and to reduce the cost of physical tests. This study involved proposing a design process that is very useful in the preliminary development stage through effective support from simulations. This type of simulation-based design process is effective in developing timing chain drives; the use of this process, based on results from multiple trials, showed improvements in performance including low friction and vibration, improved durability, and cost-effective part design when compared to conventional processes. This study proposes an integrated approach to the preliminary design of an automotive timing chain system. The approach involves structural and dynamic analyses. The details of the design process are described by using the case of a virtual engine. This study conducted and summarized a dynamic and structural analysis as well as topological optimization to describe a process to obtain optimal results. The results of this study indicated the following improvements in overall performance factors: 12.1 % improvement in transmission error, 10.1 % reduction in chain tension, 46 % reduction in tensioner arm weight, and 11 % reduction in transversal displacement.     

A product life cycle approach to urban waterfronts: The revitalization of Galveston

Abstract

Urban waterfronts are increasingly the focus of revitalization efforts designed to enhance tourism and recreation. The evolution of urban waterfronts suggests that these resources experience distinct stages of introduction, growth, maturity, decline, and sometimes revitalization. In this paper the product life cycle is broadened to describe the evolution of the waterfront district of Galveston, Texas. Implications of the product life cycle model of urban waterfront revitalization pertain to public policy formation, “product”; development, and management response to different life cycle stages.     

Pushing the CZMA Envelope: California: The First State to Litigate the New Federal Law

As noted often by the former California Coastal Commission Executive Director Peter Douglas, the history of how the California coast was saved is a great repository of untold stories. Although the Commission has had a dramatic and tangible impact on California's coastal geography, the public is largely unaware of many of its early accomplishments. This article begins to chronicle the rich stories of California's coastal legacy by telling the story of how the Commission utilized the Coastal Zone Management Act (CZMA) to prevent Southern Pacific Railroad from developing a seven-mile stretch of the Monterey Bay shoreline. In so doing, the Commission helped make possible the creation of the Monterey Peninsula Recreational Trail, a public bicycle and pedestrian path that has grown to sixteen miles in length and runs through the heart of John Steinbeck's world-famous Cannery Row. The controversy also was the subject of the first judicial challenge of a state's federal authority under the CZMA and precluded private commercial and residential development that would have dramatically altered the urban form of the Monterey Peninsula. It is important to tell the story as the Coastal Commission's role in this remarkable accomplishment has been almost completely overlooked.     

Experimental study on a model azimuthing podded propulsor in ice

The objective of this study was to investigate the performance of a model azimuthing podded propulsor in ice-covered water. Model tests were carried out with two different depths of cut into the ice (15 and 35 mm), two different ice conditions (presawn and pack ice conditions), and four different azimuthing angles. The depth of cut is the maximum penetration depth of the propeller blade into the ice block. The 0.3-m-diameter model propeller was operated in a continuous ice milling condition. Ice loads were measured by several sensors which were installed in various positions on the model. Six one-axis pancake-style load cells on the top of the model measured the global loads and two six-component dynamometers were installed on the shaft to measure the shaft loads. One six-component dynamometer was attached to the one of the propeller blades inside the hub to measure the blade loads. The pod unit and propeller performance in ice are presented. Ice-related loads, which were obtained when the blade was inside the ice block, are introduced and discussed. During the propeller–ice interaction, a blade can experience the path generated by the previous blade, which is called the shadowing effect. The effects of shadowing, depth of cut, azimuthing angle, and advance coefficient on propulsor performance are presented and discussed.