Influence of vehicle driving parameters on the noise caused by passenger cars in urban traffic

In this work, a sample of vehicles has been instrumented to measure of variables that influence vehicle noise emissions in Madrid. A circuit reproducing a normal travel pattern in large city is traveled by a fleet of vehicle models representing the fleets of cars in a European city. A sample of drivers covers the test track under different traffic conditions. Driving parameters and noise emitted have been recorded in each test and average values have been extracted. These data have been analyzed to define the noise emissions produced by a vehicle in real driving conditions and to identify the noisiest driving behaviors.     

Seasonality of picophytoplankton chlorophyll a and biomass in the central Cantabrian Sea, southern Bay of Biscay

Seasonal changes in the abundance and biomass of cyanobacteria (Synechococcus and Prochlorococcus) and picoeukaryotes were studied by flow cytometry in the upper layers of the central Cantabrian Sea continental shelf, from April 2002 to April 2006. The study area displayed the typical hydrographic conditions of temperate coastal zones. A marked seasonality of the relative contribution of prokaryotes and eukaryotes was found. While cyanobacteria were generally more abundant for most of the year (up to 2.4 10⁵ cells mL^− 1), picoeukaryotes dominated the community (up to 10⁴ cells mL^− 1) from February to May. The disappearance of Prochlorococcus from spring through summer is likely related to shifts in the prevailing current regime. The maximum total abundance of picophytoplankton was consistently found in late summer–early autumn. Mean photic-layer picoplanktonic chlorophyll a ranged from 0.06 to 0.53 µg L^− 1 with a relatively high mean contribution to total values (33 ± 2% SE), showing maxima around autumn and minima in spring. Biomass (range 0.58–40.16 mg C m^− 3) was generally dominated by picoeukaryotes (mean ± SE, 4.28 ± 0.27 mg C m^− 3) with an average contribution of cyanobacteria of 30 ± 2%. Different seasonality of pigment and biomass values resulted in a clear temporal pattern of picophytoplanktonic carbon to chlorophyll a ratio, which ranged from 10 (winter) to 140 (summer). This study highlights the important contribution of picoplanktonic chlorophyll a and carbon biomass in this coastal ecosystem.     

Analytical model for calibrating delay at congested bus stops

Abstract

A model is proposed to calculate the overall operating and delay times spent at bus stops due to passenger boarding and alighting and the time lost to queuing caused by bus stop saturation. A formula for line demand at each stop and the interaction between the buses themselves is proposed and applied to different bus stops depending on the number of available berths. The application of this model has quantified significant operational delays suffered by users and operator due to consecutive bus arrival at stops, even with flows below bus stop capacity.     

Vulnerability of Coastal Resort Cities to Mean Sea Level Rise in the Mexican Caribbean

We evaluated the potential economic impacts of increasing sea level rise (SLR) along the Mexican Caribbean where there are major gaps in our understanding of the mechanisms controlling flooding duration and frequency associated to future ecological and economic impacts. We determined the negative economic impact of SLR on infrastructure in the largest urban centers (Cancun, Isla Mujeres, Playa del Carmen, Puerto Morelos and Cozumel) in the state of Quintana Roo (Mexico) that are considered the largest tourism “hot spots” (resort cities) in the country. The tourism industry in this coastal area injects >8 billion dollars year^?1 to the Mexican economy. Our conservative economic assessment regarding the impact of SLR, under a 1?m scenario for all coastal cities is $330 million USD. Further projections for worst scenarios (SLR >2 m) show a non-linear trend where the cost of inaction can reach up to $1.4 billion USD (2?m SLR scenario) and $2.3 billion USD (3?m SLR scenario). This potential loss of infrastructure, as construction cost, is staggering and represents a robust baseline to start evaluating with more detail future impacts of climate variability and change on the Mexican Caribbean coastline.     

Safety Management Evaluation in Bus and Coach Companies

Abstract

In recent years, different initiatives have been carried out to develop Safety Management System guides or standards for coach and bus companies. They all consist of a set of safety and management requirements to be followed by organizations. However, none of them offers a complete set of tools to evaluate the safety level of the company and find the main weak points in order to improve them. The INSIA (Automotive Research Institute of Madrid, Spain) has developed a complete model that includes not only a set of elements that determine the safety level of the company but also a set of indicators and criteria to evaluate these elements by a team of auditors. The model allows companies to measure their safety level, find the weakest points and propose improvement actions.     

Determinants of container port choice in Spain

For the economic and financial evaluation of port investment projects, it is important to know the demand function of a port's services. The objective of this study is to establish such a demand choice function for the Spanish container port services. The function is derived from the coefficients of a port choice model, for which a multinomial logit model is used and of which the coefficients are estimated with regression analysis. The variables tested concern inland transport cost, ocean transport costs and broad proxy variables for quality of service. Information on container import and export flows for 2007 is obtained from the Spanish Treasury Department. The linear regression analysis is based on differences of utilities of alternative routings of containerised cargoes compared to those routed via the port of Valencia. The obtained results are satisfactory in terms of model fit. The estimated coefficients can be used to assess the impact of changes in costs of container flows routed via a port on a port's market share. A demand choice function for the port can be derived by systematically doing so. An example is presented for the port of Valencia.     

Accompanied versus Unaccompanied Transport in Short Sea Shipping between Spain and Italy: An Analysis from Transport Road Firms Perspective

Short sea shipping (SSS) is called to play a key role in ensuring sustainable mobility in the European context. In the past years several studies tried to define the SSS requirements and also to identify the SSS lines that were economically viable. However, no studies approach the profile of their users—the road transport firms—and the organizational patterns adopted by them, in order to gain a better understanding of this transport modality. This research, on the basis of a sample of 81 international road transport firms that use SSS between Spain and Italy, analyses the profile of these firms and certain elements inherent to their relationship with the shipping firms, according to the two modalities of organizing their SSS transport operations: accompanied versus unaccompanied.     

Optimizing bus-size and headway in transit networks

Optimization models for calculating the best size for passenger carrying vehicles in urban areas were popular during the 1980s. These studies were abandoned in the ‘90s concluding that it was more efficient to use smaller buses at higher frequencies. This article returns to this controversial question, starting from the point of view that any calculation of bus size can only be made after considering the demand for each of the routes on the system. Therefore, an optimization model for sizing the buses and setting frequencies on each route in the system is proposed in accordance with the premises detailed below. The proposed model is a bi-level optimization model with constraints on bus capacity. The model allows buses of different sizes to be assigned to public transport routes optimizing the headways on each route in accordance with observed levels of demand. At the upper level the model considers the optimization of the system’s social and operating costs, these are understood to be the sum of the user’s and operator’s costs. At the lower level there is an assignment model for public transport with constraints on vehicle capacity which balances the flows for bus sizes and headways at each iteration. By graphically representing the results of the model applied to a real case, a series of useful conclusions are reached for the management and planning of a fleet of public transport vehicles.     

Willingness to pay for improving service quality in a multimodal area

Travellers use the installations at multimodal areas to transfer from one mode of transport to another. In many cases these installations are called interchanges. This article characterises the users of transport interchanges to determine the fundamental attributes which they most value when they pass through the area. A Stated Choice survey is designed and administered and Mixed Logit models are estimated to calculate willingness to pay levels for three main attributes: transfer time, the quality of the available information and the services provided in the area. Travellers place most value on the quality of the information they receive and the available services rather than on transfer time, which contradicts the widely held opinion of experts in the field. This opens up new possibilities in the design of modern interchanges which should concentrate more on being welcoming areas with many information points rather than being based around minimising transfer times.     

A simulation tool for bicycle sharing systems in multimodal networks

This paper presents a methodology for modelling an urban transport system, integrating public bicycles in a multi-modal network. A bike cost function that reproduces the effect of slopes on cycling speeds is proposed. Also, the effect of traffic levels on the attractiveness of cycling routes is taken into account. The model applies the modal split and network assignment phases in a multimodal network with different classes of users. It has been verified over a test network and then validated by applying it to a real case in the city of Santander in Spain. The results obtained make this model a useful decision-making tool to encourage the use of the public bicycle from a sustainable development point of view.