Genetics of traffic assignment models for strategic transport planning

This paper presents a review and classification of traffic assignment models for strategic transport planning purposes by using concepts analogous to genetics in biology. Traffic assignment models share the same theoretical framework (DNA), but differ in capability (genes). We argue that all traffic assignment models can be described by three genes. The first gene determines the spatial capability (unrestricted, capacity restrained, capacity constrained, and capacity and storage constrained) described by four spatial assumptions (shape of the fundamental diagram, capacity constraints, storage constraints, and turn flow restrictions). The second gene determines the temporal capability (static, semi-dynamic, and dynamic) described by three temporal assumptions (wave speeds, vehicle propagation speeds, and residual traffic transfer). The third gene determines the behavioural capability (all-or-nothing, one shot, and equilibrium) described by two behavioural assumptions (decision-making and travel time consideration). This classification provides a deeper understanding of the often implicit assumptions made in traffic assignment models described in the literature. It further allows for comparing different models in terms of functionality, and paves the way for developing novel traffic assignment models.     

Using on-board logging devices to study the longer-term impact of an eco-driving course

In this paper the long-term impact of an eco-driving training course is evaluated by monitoring driving behavior and fuel consumption for several months before and after the course. Cars were equipped with an on-board logging device that records the position and speed of the vehicle using GPS tracking as well as real time as electronic engine data extracted from the controller area network. The data includes mileage, number of revolutions per minute, position of the accelerator pedal, and instantaneous fuel consumption. It was gathered over a period of 10 months for 10 drivers during real-life conditions thus enabling an individual drive style analysis. The average fuel consumption four months after the course fell by 5.8%. Most drivers showed an immediate improvement in fuel consumption that was stable over time, but some tended to fall back into their original driving habits.     

Skyhook and H8 Control of Semi-active Suspensions: Some Practical Aspects

Summary This paper deals with single-wheel suspension car model. We aim to prove the benefits of controlled semi-active suspensions compared to passive ones. The contribution relies on H 8 control design to improve comfort and road holding of the car under industrial specifications, and on control validation through simulation on an exact nonlinear model of the suspension. Note that we define semi-active suspensions as control systems incorporating a parallel spring and an electronically controlled damper. However, the type of damper used in automotive industry can only dissipate energy. No additional force can be generated using external energy. The control issue is then to change, in an accurate way, the damping (friction) coefficient in real-time. This is what we call semi-active suspension. For this purpose, two control methodologies, H 8 and Skyhook control approaches, are developed, using a linear model of the suspension, and compared in terms of performances using industrial specifications. The performance analysis is done using the control-oriented linear model first, and then using an exact nonlinear model of the suspension incorporating the nonlinear characteristics of the suspension spring and damper.     

如何使用智能复用器升级车用上桥臂驱动器

汽车照明系统对电子元器件的要求越来越高,智能复用器可以解决PWM通道、诊断功能和系统可靠性问题。     

Towards a standardized European road network database

Many Driver Information Systems, especially those that provide location information and route guidance instruction, rely on some form of digital map data, i.e. data that represent the location and other properties of earth-bound objects. A deeperinformation analysis of the data needs of the systems reveals that many needs are very close to the demands that a human navigator makes on a classical paper map. But it also reveals some hidden needs, which relate to the fact that the current Driver Information Systems have only a very poor or no general knowledge. Gathering all these data, putting them into a database and keeping them up to date is an enormous task. Therefore it is very important to know whatsurveying and digitizing techniques are the most suitable for such data. This question is currently being investigated by two DRIVE projects, PANDORA and Task Force EDRM.To guarantee the efficiency of a road network database and to guarantee the exchangeability of traffic messages, a certainstandardization will be inevitable. One possibility is to standardize the finished article, i.e. the map data in the form in which they are represented on the medium used by the system itself (e.g. CD, coded beacon message). This is the solution that has been chosen in Japan, where a CD-ROM based standard has been defined. It is also the solution chosen by the European manufacturers of beacon-supported systems such as Autoguide and LISB, who have defined a standard for the road-vehicle communication link. Another possibility is to standardize the semi-manufactured article, i.e. the map data as they occur in a general purpose road database or in the datafiles produced by data suppliers. This solution has been chosen by Bosch and Philips and had led to their GDF, in which they define a standard data content, a data model and an exhange format for these files. If the systems are going to combine data coming from different sources, the need arises for standard reference numbers. This means that an organizational infrastructure will have to be set up to create and maintain such a reference numbering system. A road database that is kept up to date, represents a lot of money. It will be vitally important for such databases to be legally protected against copying activities.     

Modelling Externalities using Dynamic Traffic Assignment Models: A Review

Recently, there has been a growing interest in externalities in our society, mainly in the context of climate and air quality, which are of importance when policy decisions are made. For the assessment of externalities in transport, often the output of static traffic assignment models is used in combination with so-called effect models. Due to the rapidly increasing possibilities of using dynamic traffic assignment (DTA) models for large-scale transportation networks and the application of traffic measures, already several models have been developed to assess the externalities using DTA models more precisely. Different research projects have shown that there is a proven relation between the traffic dynamics and externalities, such as emissions of pollutants and traffic safety. This means that the assessment of external effects can be improved by using temporal information about flow, speed and density, which is the output of DTA models. In this paper, the modelling of traffic safety, emissions and noise in conjunction with DTA models is reviewed based on an extensive literature survey. This review shows that there are still gaps in knowledge in assessing traffic safety, much research is available concerning emissions, and although little research has been conducted concerning the assessment of noise using DTA models, the methods available can be used to assess the effects. Most research so far has focused on the use of microscopic models, while mesoscopic or macroscopic models may have a high potential for improving the assessment of these effects for larger networks.     

Pruning and ranking the Pareto optimal set,application for the dynamic multi‐objective network design problem

Solving the multi‐objective network design problem (MONDP) resorts to a Pareto optimal set. This set can provide additional information like trade‐offs between objectives for the decision making process, which is not available if the compensation principle would be chosen in advance. However, the Pareto optimal set of solutions can become large, especially if the objectives are mainly opposed. As a consequence, the Pareto optimal set may become difficult to analyze and to comprehend. In this case, pruning and ranking becomes attractive to reduce the Pareto optimal set and to rank the solutions to assist the decision maker. Because the method used, may influence the eventual decisions taken, it is important to choose a method that corresponds best with the underlying decision process and is in accordance with the qualities of the data used. We provided a review of some methods to prune and rank the Pareto optimal set to illustrate the advantages and disadvantages of these methods. The methods are applied using the outcome of solving the dynamic MONDP in which minimizing externalities of traffic are the objectives, and dynamic traffic management measures are the decision variables. For this, we solved the dynamic MONDP for a realistic network of the city Almelo in the Netherlands using the non‐dominated sorting genetic algorithm II. For ranking, we propose to use a fuzzy outranking method that can take uncertainties regarding the data quality and the perception of decision makers into account; and for pruning, a method that explicitly reckons with significant trade‐offs has been identified as the more suitable method to assist the decision making process. Copyright © 2012 John Wiley & Sons, Ltd.     

Enhancing roll stability of heavy vehicle by LQR active anti-roll bar control using electronic servo-valve hydraulic actuators

Rollover of heavy vehicle is an important road safety problem world-wide. Although rollovers are relatively rare events, they are usually deadly accidents when they occur. The roll stability loss is the main cause of rollover accidents in which heavy vehicles are involved. In order to improve the roll stability, most of modern heavy vehicles are equipped with passive anti-roll bars to reduce roll motion during cornering or riding on uneven roads. However these may be not sufficient to overcome critical situations. This paper introduces the active anti-roll bars made of four electronic servo-valve hydraulic actuators, which are modelled and integrated in a yaw-roll model of a single unit heavy vehicle. The control signal is the current entering the electronic servo-valve and the output is the force generated by the hydraulic actuator. The active control design is achieved solving a linear optimal control problem based on the linear quadratic regulator (LQR) approach. A comparison of several LQR controllers is provided to allow for tackling the considered multi-objective problems. Simulation results in frequency and time domains show that the use of two active anti-roll bars (front and rear axles) drastically improves the roll stability of the single unit heavy vehicle compared with the passive anti-roll bar.     

管理信息系统内部人为安全隐患防范的研究

作者讨论了管理信息系统所面临的安全问题,重点分析了内部操作人员人为因素导致的安全隐患,以及对应的防范措施,并结合武汉铁路中心医院信息系统,论述了在具体应用中如何防范这些安全隐患.     

Assessing methods for comparing emissions from gasoline and diesel light-duty vehicles based on microscale measurements

This paper assess whether a real-world second-by-second methodology that integrates vehicle activity and emissions rates for light-duty gasoline vehicles can be extended to diesel vehicles. Secondly it compares fuel use and emission rates between gasoline and diesel light-duty vehicles. To evaluate the methodology, real-world field data from two light-duty diesel vehicles are used. Vehicle specific power, a function of vehicle speed, acceleration, and road grade, is evaluated with respect to ability to explain variation in emissions rates. Vehicle specific power has been used previously to define activity-based modes and to quantify variation in fuel use and emission rates of gasoline vehicles taking into account idle, acceleration, cruise, and deceleration. The fuel use and emission rates for light-duty diesel vehicles can also be explained using vehicle specific power -based modes. Thus, the methodology enables direct comparisons for different vehicle fuels and technologies. Furthermore, the method can be used to estimate average fuel use and emission rates for a wide variety of driving cycles.