法国Citadis 300新型有轨电车

Citadis300是阿尔斯通公司最新研制的一种模块式有轨电车。该车具有二次损伤保护装置、噪声低、维修方便等优点，且较以往生产的有轨电车价格便宜20％－30％。     

Post-buckling behaviour and strength of multi-stiffened aluminium panels under combined axial compression and lateral pressure

This paper presents the results of complementary numerical study done in the continuation of the activities carried out by the Committee III.1 “Ultimate Strength” of ISSC'2003 (Ref. [28] ).The main focus of the paper concerns the post-buckling behaviour and strength characteristics of the aluminium multi-stiffened panels under combined axial compression and lateral pressure.The finite element model proposed by the Committee III.1 “Ultimate Strength” of ISSC'2003 is used in the present investigation. Material is aluminium alloy AA6082-T6 and the multi-stiffened panel is a triple-span structure. Stiffeners are of either extruded or non-extruded angle-bar profiles. An initial deflection is imposed on the model in a procedure similar to that applied by the Committee III.1. General purpose finite element code ANSYS is used for non-linear elastic–plastic analyses.Main objectives are to study the influence of initial deflections and also HAZ on the post-buckling behaviour and collapse characteristics of aluminium stiffened panels under combined axial compression and lateral pressure. Different values of lateral pressure are exerted on the model in a systematic manner to simulate various levels of lateral pressure loading on multi-stiffened aluminium panels used in the construction of high-speed crafts.     

The overall effects of road works on global warming gas emissions

Road characteristics influence the amount of pollution generated by traffic. They govern the rolling resistance, which includes: the viscoelastic behaviour of the pavement structure, surface texture, and profile unevenness. Road works are performed on a periodic basis to maintain these characteristics at proper levels of service (e.g. safety, comfort, and noise). While such works produce additional pollution (due to congestion around worksites or extra fuel consumption along the detour route), they still result in less pollution over the long term. This article assesses the balance between an increase in gas emissions during road works and the reduction in emissions from traffic once the works are completed. It is demonstrated that when road works are introduced to correct longitudinal profiles, rather than texture, the emissions benefit is substantial.     

Influence of residual stresses and geometric imperfections on the elastoplastic collapse of cylindrical tubes under external pressure

The buckling problem of a circular cylindrical shell has long been widely investigated due to its great importance in the design of aerospace and marine structures. Geometric imperfections and residual stresses are inevitable in practice and have been so far frequently considered in analytical and numerical predictions. But little attention has been paid until now on the combined influence of such initial defects on the critical and often unstable response of such elastoplastic structures. In this paper, a shell finite element is designed within the total Lagrangian formulation framework to deal with the elastoplastic buckling and post-buckling of thin cylindrical tubes under external pressure and axial compression. A specific experimental process will be introduced in order to measure residual stresses in the shell very accurately, so as to include them in the numerical calculations. The present formulation will enable us to describe the complete non-linear solutions, namely the critical pressures (bifurcation and limit (collapse) loads), the bifurcation modes and the bifurcated equilibrium branches up to advanced post-critical states. Comparisons will be made between numerical results and the experimental critical value and deformation patterns of a new generation profiler. Furthermore, the combined effects of geometric imperfections, residual stresses and plasticity will be analyzed.     

Traveled distance,stock and fuel efficiency of private vehicles in Canada: price elasticities and rebound effect

This paper presents estimates of the rebound effect and other elasticities for the Canadian light-duty vehicle fleet using panel data at the provincial level from 1990 to 2004. We estimate a simultaneous three-equation model of aggregate demand for vehicle kilometers traveled, vehicle stock and fuel efficiency. Price and income elasticities obtained are broadly consistent with those reported in the literature. Among other results, an increase in the fuel price of 10% would reduce driving by ~2% in the long term and by 1% the average fuel consumption rate. Estimates of the short- and long-term rebound effects are ~8 and 20%, respectively. We also find that an increase in the gross domestic product per capita of 10% would cause an increase in driving distance of 2–3% and an increase of up to 4% in vehicle stock per adult. In terms of policy implications, our results suggest that: (1) the effectiveness of new fuel efficiency standards will be somewhat mitigated by the rebound effect and (2) fuel price increases have limited impacts on gasoline demand.

Simulation of unsteady free-surface flow around a ship hull using a fully coupled multi-phase flow method

An accurate, efficient algorithm for solving free surface flows around ship hulls is described. Accuracy is achieved using a compressive advection discretization which maintains a sharp free surface interface representation without relying on a small time step. Efficiency is obtained using a solution algorithm which implicitly couples velocity, pressure, and volume fractions. The algorithm has been implemented in a computational fluid dynamics code called CFX and is validated by means of a comparisonwith experimental data of benchmark cases in both steady and transient conditions.     

Two- or three-layered box-models versus fine 3D models for coastal ecological modelling? A comparative study in the English Channel (Western Europe)

The general trend in ecosystem modelling is to improve the spatial resolution by shifting from rough box-models to fine 3D models. Despite the continuous speeding-up of computing, 3D models involving numerous state variables may remain intractable, especially for parameter calibration, when processes with long half-life periods (i.e, from years to decades) are introduced, such as the behaviour of organic matter in sediment and population dynamics of benthic species. In these cases, a first approach can be provided by fast-running box-models, if they take into account the most crucial hydrodynamic properties of the system. In a macrotidal shelf sea such as the English Channel, the long-term horizontal transport can be summarized by the tidal residual circulation, and the vertical stratification can be sketched by a two- or three-layered integral model.This paper compares the results obtained in the English Channel area by the same biogeochemical equations of pelagic primary production, coupled to 1) a two-layered box-model 2) a three-layered box-model (i.e., with an intermediate cline layer between surface and bottom ones) and 3) a fine-gridded 3D model. Comparison is focused firstly on thermal stratification and summer dinoflagellate blooms in the north-western Channel and secondly on the haline stratification and the sequence of blooms obtained in the eutrophicated Seine river plume. Comparison shows that box-models act as low-pass filters which reproduce correctly the weekly mean time-course, but greatly reduce the variance locally observed in a tide-oscillating plume region. As far as global characteristics are concerned, such as the annual primary production, or the percentage of variation in annual production after reducing the nutrient loadings, the box and 3D models gave very similar results. This conclusion reinforces the usefulness of using box-models as a first approach in long-term processes, for which a long transient phase is expected before reaching the annual periodic solution.     

巴黎地铁用MF2000型车组

介绍了法国巴黎地铁用MF2 0 0 0型车组的招标、车内布置、主要技术参数以及整修计划     

KERFIX, a time-series station in the Southern Ocean: a presentation

Between January 1990 and March 1995, the research project KERFIX undertook the first regular noncoastal multiyear acquisition of parameters related to the carbon cycle in the Southern Ocean at a time series station located at 50°40′ S–68°25′ E, 60 miles southwest of the Kerguelen Islands. The objectives of KERFIX are (1) to monitor the ocean/atmosphere CO₂ and O₂ exchanges and to understand which processes govern these exchanges (2) to observe and interpret the seasonal and interannual variability of the production, flux, decomposition and dissolution of carbon and associated elements at this location. In addition, micropaleontological studies describe the present and past flux dynamics in this oceanic area, to improve the knowledge of the transfer functions of some oceanographic proxies. This paper presents a survey of the KERFIX program: scientific objectives, organization of the field operations and some main results obtained since the beginning of KERFIX program, as well as the results of the temporal evolution of hydrological, chemical and biological parameters.     

Using measured instead of perceived noise in hedonic models

This paper compares the use of perceived and measured noise in a hedonic housing model. Although in theory the use of subjective variables is recommended, most empirical applications use measured noise variables. Merging different databases, we obtain a sample of about 2800 apartments located in Geneva, Switzerland, containing both measured and perceived noise data. We make the measured and perceived noise data comparable and analyse their performance by fitting alternatively three hedonic models. We find that for moderate to high noise levels the measured noise safely approximates its perception.