Broaching prediction of a wave-piercing tumblehome vessel with twin screws and twin rudders

The new intact stability criteria which are under development at the International Maritime Organization (IMO) are required to cover a broaching phenomenon, well known as a great threat to high-speed vessels which can lead to capsizing. Some reports exist which demonstrate that their numerical models can predict a highly nonlinear phenomenon of broaching. However, additional validation studies are needed for unconventional vessels, in addition to conventional ones, to develop direct stability assessment methods for the new intact stability criteria. In this research, we selected as the subject ship a wave-piercing tumblehome vessel with twin screws and twin rudders, a design expected to be one of a new generation of high-speed monohull ships. Firstly, a series of captive model tests were conducted to measure the resistance, the manoeuvring forces, the wave-exciting forces, the heel-induced hydrodynamic forces, and the roll restoring variation for the unconventional tumblehome vessel. Secondly, the existing mathematical model which had been developed for broaching prediction of conventional vessels with a single propeller and a single rudder was extended to unconventional vessels with twin propellers and twin rudders. Finally, comparisons between numerical simulations and the existing free running model experiments were conducted. As a result, it was demonstrated that fair quantitative prediction of broaching is realised when the rudder force variation, the roll restoring variation and the heel-induced hydrodynamic force for large heel angles are taken into account.     

An investigation of different methods for the prevention of parametric rolling

The parametric rolling of modern containerships is emerging as a serious problem, to the extent that its effects warrant a study into its prevention. In light of this, two methods for reduction of parametric rolling are proposed and examined by physical model experiments. The first is a sponson attached to the side of a ship, the purpose being to decrease the rate of change of the rollrestoring moment. The second is an antirolling tank to increase roll damping. By conducting free-running model experiments for a 6600-TEU post-Panamax container ship with sponsons under typical parametric rolling conditions, it was found that the sponsons could decrease the magnitude of parametric rolling. The antirolling tank could prevent parametric rolling completely in certain conditions, even in severe head seas. Using the damping coefficients from experimentally derived data of a model ship with an antiroll tank, a numerical simulation was established. The numerical model was then compared with the free-running model experiments. The results indicated that the numerical model could qualitatively verify the experimental results. Finally, an attempt to optimise the size of an antirolling tank for preventing parametric rolling for the subject post-Panamax container ship in the North Pacific Ocean is presented.     

MODULATION OF γ－AMINOBUTYRIC ACID （GABA） RELEASE FROM RAT CEREBRAL CORTICAL GABA NEURONS BY PRESYNAPTIC GABA_A RECEPTOR

ＺｈｕＨｅ（朱和）；ＨａｓｈｉｍｏｔｏＴｓｕｎｅｉｃｈｉ（桥本恒一）；ＫａｔｓｕｒａＭａｓａｈｉ（桂昌司）；ＫｕｒｉｙａｍａＫｉｎｙａ（粟山欣弥）ＭＯＤＵＬＡＴＩＯＮＯＦγ－ＡＭＩＮＯＢＵＴＹＲＩＣＡＣＩＤ（ＧＡＢＡ）ＲＥＬＥＡＳＥＦＲＯＭＲＡＴＣＥ...     

Dynamic control of a remotely operated vehicle using a neural network

The control of a remotely-operated underwater vehicle to maintain a prescribed depth in shallow water under irregular surface waves is realized through the application of the Robust Adaptive Neuro Controller, a composite control system incorporating—together with the conventional control algorithm—a neural network controller. This network bestows a learning capability on the system, allowing it to deal with unanticipated disturbances that would otherwise cause erroneous behavior of the vehicle. The effectiveness of this application is verified through mathematical simulation of a model vehicle's behavior, through experiment in a model basin, and through simulation of the behavior of an actual remotely operated vehicle in shallow water under irregular surface waves. Graphic data representing the learning process undergone by the neural network distinctly indicate the rising output from the network with the progression of learning, and the vehicle's depth variation traced in terms of the mean square error vividly show the diminution of deviation from the prescribed depth obtained with application of the neural network. Thus controlled to maintain constant depth, under-water vehicles with power supplied externally through a tether for propulsion and for heavy-duty operations should consolidate their advantage for such activities as maintenance of submarine structures and surveys in deep or hazardous water.     

Broaching prediction in the light of an enhanced mathematical model,with higher-order terms taken into account

 We have attempted to develop a more consistent mathematical model for capsizing associated with surf-riding in following and quartering waves by taking most of the second-order terms of the waves into account. The wave effects on the hull maneuvring coefficients were estimated, together with the hydrodynamic lift due to wave fluid velocity, and the change in added mass due to relative wave elevations. The wave effects on the hydrodynamic derivatives with respect to rudder angles were estimated by using the Mathematical Modelling Group (MMG) model. Then captive ship model experiments were conducted, and these showed reasonably good agreements between the experiments and the calculations for the wave effects on the hull and the rudder maneuvring forces. It was also found that the wave effects on restoring moments are much smaller than the Froude–Krylov prediction, and the minimum restoring arm appears on a wave downslope but not on a wave crest amidship. Thus, an experimental formula of the lift force due to the heel angle of the ship is provided for numerical modelling. Numerical simulations were then carried out with these second-order terms of waves, and the results were compared with the results of free-running model experiments. An improved prediction accuracy for ship motions in following and quartering seas was demonstrated. Although the boundaries of the ship motion modes were also obtained with both the original model and the present one, the second-order terms for waves are not so crucial for predicting the capsizing boundaries themselves. Received: June 20, 2002 / Accepted: October 10, 2002 Acknowledgments. This research was supported by a Grant-in-Aid for Scientific Research of the Ministry of Education, Culture, Sports, Science and Technology of Japan (No. 13555270). The authors thank Prof. N. Rakhmanin of the Krylov Ship Research Institute for providing the Russian literature, as well as Mr. H. Murata of NHK (Japan Broadcasting Corporation) for translating it into Japanese. Address correspondence to: N. Umeda (e-mail: umeda@naoe.eng.osaka-u.ac.jp)     

日本新型夜行列车--"仙后座"

介绍了日本新型夜行列车——“仙后座”的结构特点、系统和设备。     

Study of fatigue crack nucleation processes by crystalline FE analysis

 In order to accumulate knowledge about how material compositions and manufacturing methods affect fatigue strength, this paper investigates the relationship between the swiftness of the changes in the macroscopic indices of the crack initiation process and the hardening properties of a material. This is done by calculating the cyclic deformation behavior of a f.c.c. single crystal. The relationship between the swiftness of the changes and the crystal geometries is also examined by calculating the deformation behavior of a f.c.c. crystal with a high Schmid factor buried in a large crystal with a low Schmid factor. In addition, a multiscale hardening rule based on forest theory is developed in order to examine the microscopic mechanisms of fatigue slip band (persistent slip bands, PSBs) formation. The validity of the theories presented is examined by comparing the changing nature of the measured and calculated hysteresis loop shapes of f.c.c. single crystals. Inhomogenous slip deformation through the crystal is also investigated, and inferences are then drawn about the microscopic mechanisms of cyclic hardening and PSB formation. Received: August 5, 2002 / Accepted: December 18, 2002 Address correspondence to: N. Osawa (osawa@naoe.eng.osaka-u.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Nav Archit Jpn 1998;184:351–363, 1999;185:283–292 and 186:535–544, 2001;190:539–551)     

Qualitative aspects of nonlinear ship motions in following and quartering seas with high forward velocity

By utilizing a four-degrees-of-freedom numerical model with dense grids of control parameters and the sudden-change concept, the qualitative aspects of the nonlinear motions of a fishing vessel complying with the International Maritime Organization's intact stability criteria in following and quartering seas were intensively explored. As a result, capsizing due to broaching, capsizing without broaching, broaching without capsizing, stable surf-riding, and steady periodic motion were identified. The natures of the boundaries of these motions in the control parameter plane were investigated, and the effects of the initial conditions and the nonlinearity of calm-water maneuvering forces are also discussed. Furthermore, comparisons with a model experiment showed that the numerical model used here qualitatively explains capsizing phenomena, but quantitatively overestimates the danger of capsizing. Received: June 11, 2001 / Accepted: October 9, 2001