Direct yaw moment control and power consumption of in-wheel motor vehicle in steady-state turning

Driving force distribution control is one of the characteristic performance aspects of in-wheel motor vehicles and various methods have been developed to control direct yaw moment while turning. However, while these controls significantly enhance vehicle dynamic performance, the additional power required to control vehicle motion still remains to be clarified. This paper constructed new formulae of the mechanism by which direct yaw moment alters the cornering resistance and mechanical power of all wheels based on a simple bicycle model, including the electric loss of the motors and the inverters. These formulation results were validated by an actual test vehicle equipped with in-wheel motors in steady-state turning. The validated theory was also applied to a comparison of several different driving force distribution mechanisms from the standpoint of innate mechanical power.     

Parametric rolling prediction in irregular seas using combination of deterministic ship dynamics and probabilistic wave theory

In recent years there have been reports of serious accidents of parametric rolling for modern container ships and car carriers. For avoiding such accidents, a prediction method of parametric rolling in irregular seas is required. Since parametric rolling is practically non-ergodic, repetitions of numerical simulations or experiments could be not feasible to ascertain the behaviour. Therefore, in this paper, a method combining a stochastic approach with a deterministic approach in order to estimate the probabilistic index without such simple repetitions is developed. The ship's response in regular seas is estimated by solving an averaged system of the original 1-DoF roll model, and random waves necessary for occurrence of parametric rolling is achieved by using Longuet-Higgins’s or Kimura’s wave group theory. As a result, a fast and robust computation method of the probabilistic index is established. Finally, it is concluded that the proposed method is considered to be one of the useful tools for discussing the new IMO Intact Stability Code.     

Active control for installation of underwater structures

The trend towards deepwater development requires a new approach to underwater installation of offshore structures. The present method using crane vessels has some drawbacks in operations at more than 2000 m depth. The natural period of the coupled system of the rigged structure and the crane vessel becomes longer, so that it is no longer possible to manipulate the cranes to achieve the desired positioning accuracy. This paper examines the application of an active control technique for underwater installations as one of the solutions to the present problems. An active control technique also has the advantage that it can deal with the structural flexibility which allows the structure to be large and light-weight. This structural flexibility imposes problems of suppressing the elastic responses and securing the stability of the control system. In this paper, anH _∞ controller combined with a low authority control/high authority control (LAC/HAC) feedback controller is designed for cases where structural flexibility cannot be ignored. A robust model-following controller is examined for cases where the structure can be treated as rigid. In order to confirm the control algorithm and verify the possibility of the active control installation method, basin tests are executed using two types of neutrally buoyant flexible models with ultrasound ranging systems and thrusters.     

A Finite Element Model for Analysis of Deformations of Bias-Ply Motorcycle Tires Subject to Inflation Pressure

The finite element model previously formulated to represent a bias-ply motorcycle tire is improved for more accurate orthotropic stiffness values. Efforts are centered on accurate mapping of the cord angle from an actual tire to the finite element model. Using this improved finite element model, the deformations of the bias-ply motorcycle tire subject to inflation pressure are analyzed.     

The Mechanism of Camber Thrust Generation in a Bias-ply Motorcycle Tire

A finite element model suitable for camber thrust analysis is formed. By inclining and pressing this finite element model onto the road plane, the forces prevailing in the contact patch of an inclined standing tire are calculated and the asymmetry-dependent mechanism of camber thrust generation is analyzed. By rotating the inclined standing tire at a constant vertical deflection, the roll-distance-dependent mechanism of camber thrust generation is analyzed.     

Simple Lagrangian formulation of bubbly flow in a turbulent boundary layer (bubbly boundary layer flow)

For the theoretical consideration of a system for reducing skin friction, a mathematical model was derived to represent, in a two-phase field, the effect on skin friction of the injection of micro air bubbles into the turbulent boundary layer of a liquid stream. Based on the Lagrangian method, the equation of motion governing a single bubble was derived. The random motion of bubbles in a field initially devoid of bubbles was then traced in three dimensions to estimate void fraction distributions across sections of the flow channel, and to determine local bubble behavior. The liquid phase was modeled on the principle of mixing length. Assuming that the force exerted on the liquid phase was equal to the fluid drag generated by bubble slip, an equation was derived to express the reduction in turbulent shear stress. Corroborating experimental data were obtained from tests using a cavitation tunnel equipped with a slit in the ceiling from which bubbly water was injected. The measurement data provided qualitative substantiation of the trend shown by the calculated results with regard to the skin friction ratio between cases with and without bubble injection as function of the distance downstream from the point of bubble injection.List of symbols B law of wall constant - C _f local coefficient of skin friction - C _f0 local coefficient of skin friction in the absence of bubbles - d _b bubble diameter [m] - g acceleration of gravity [m/s²] - k ₁ k₄ proportional coefficient - k _L turbulent energy of the liquid phase [m²/s²] - L representative length [m] - l _b mean free path of a bubble [m] - m _A added mass of a single bubble [kg] - m _b mass of a single bubble [kg] - N _x ,N _y ,N _z force perpendicular to the wall or ceiling exerted on a bubble adhering to that wall or ceiling [N] - P absolute pressure [Pa] - Q _G rate of air supply [/min] - q _L ⁽ⁱ⁾ turbulent velocity at the ith time increment [m/s] - R> _ex Reynolds number defined by Eq. 32 - T _*L integral time scale of the liquid phase [s] - U velocity of the main stream [m/s] - ,¯v,¯w time-averaged velocity components [m/s] - u,v,w turbulent velocity components [m/s] - û _L ,v_L root mean square values of liquid phase turbulence components in thex- and y-directions [m/s] - V volume of a single bubble [m³] - X,Y,Z components of bubble displacement [m] - x _s ,y _s ,z _s coordinate of a random point on a sphere of unit diameter centered at the coordinate origin - root mean square of bubble displacement in they-direction in reference to the turbulent liquid phase velocity [m] - local void fraction - _m mean void fraction in a turbulent region - regular random number - R _v increment of the horizontal component of the force acting on a single bubble, defined by Eq. 22 [N] - t time increment [s] - ₁ reduction of turbulent stress [N/m²] - _L rate of liquid energy dissipation [m²/s³] - _m coefficient defined by Eq. 30 - law of wall constant in the turbulent region in absence of bubbles - ₁ law of wall constant in the turbulent region in presence of bubbles     

Analysis of the accident of the MVNakhodka. Part 1. Estimation of wave loads

MVNakhodka collapsed and broke in two on January 2, 1997 in the Sea of Japan, giving rise to a serious and disastrous oil spill on the coastline of Japan. During the inquiry into the cause of the accident, one of the main tasks of the inquiry committee was to identify the external loads which made the ship structure collapse. Among the several possible scenarios for the accident, after careful examination, the wave loads in the heavy weather at the time of the accident were taken to be the most plausible cause. The results of that research are described in two papers, and the present paper deals with the way in which wave loads on theNakhodka at the moment of the accident were estimated. We first describe the details of the accident such as the location, the sea condition, the loading condition, and the ship's heading speed. Then the static loads resulting from the distribution of the cargo weight and the buoyancy are given to show that the static bending moment at the time of the accident caused extreme sagging. Next the wave loads in the irregular waves, calculated by the nonlinear time domain simulation program SRSLAM, are presented. It is shown that the bending moment in the waves reaches 1 087 800 KN^*m at maximum SS 6.9, which is where the hull girder collapse took place. It was concluded that the ship broke in two because the bending moment exceeded the hull girder strength which had been reduced due to corrosion, taking into account conclusions derived from the research dealing with the structural strength aspect. We also discuss the stochastic significance of the estimated value and nonlinear nature of the peak distribution, in addition to the effects of the ship speed and wave heading on the wave load estimation. This article is based on an article that appeared in Japanese in the Journal of the Society of Naval Architects of Japan, vol. 183 (1998).     

Assessment of ship evacuations in response to pending tsunamis

Earthquakes occur due to friction between two geological plates. Historically, numerous earthquakes have occurred in the southern Sea of Japan. As of January 2008, the estimated probability of occurrence of the next Nankai or Tonankai earthquake within the next 30 years has been set at 50 or 60–70%, respectively. Should either of these earthquakes occur, a tsunami resulting in great horizontal movement and force could also result, setting numerous vessels adrift inside ports, causing destruction to port facilities, and endangering human life inside the vessels. Thus, appropriate countermeasures are required for ships because they may be forced to change locations unexpectedly. To minimize the probability of disaster should a tsunami forecast be issued, all vessels in Osaka Bay will need to evacuate immediately and proceed to safe anchorage areas before the tsunami arrives. However, the orderly evacuation of ships to safe anchorage areas would face difficulties due to traffic density within the Osaka Port area, and so appropriate improvements to ship traffic management are required. In this paper, several vessel-related issues, such as inter-ship distances, evacuation order procedures prior to the arrival of the first tsunami, and the first peak tsunami arrival time, are evaluated using general discrete event simulation.     

Learning tracking controllers under unknown disturbances for the installation of rigid and flexible structures

During the installation operations of underwater structures, offshore structures such as semisubmersibles, the steady nonlinear hydrodynamic force due to the ocean current, the tidal current, and the hydrodynamic interaction between structures are regarded as major disturbances. Generally, it is difficult and very expensive to collect information about these disturbances in advance, although such knowledge would be important and necessary for precise installation. Because of this situation, we have proposed a learning tracking controller (LTC) for automated tracking/docking operations of offshore structures. The LTC can be operated without any information about current, and can be applied to the installation problem of flexible structures whose flexibility cannot be ignored. In order to confirm the effectiveness of the LTC, basin tests were carried out using experimental models with an unknown current. Two types of basin experiment were executed using an ultrasound ranging system and thrusters. One was trajectory tracking of a semisubmersible, and the other was the precise mating of flexible underwater structures. In both cases the LTC showed good performance, and in the latter case in particular, two flexible models were successfully made to track the given trajectory and dock to the docking targets with an accuracy of ±5 mm, after the trajectory had been tracked six to seven times for learning purposes. No elastic responses were excited in the flexible model. Received for publication on Dec. 1, 1999; accepted on March 13, 2000     

A Sliding Mode Controller for Wheel Slip Ratio Control System

A sliding mode controller has been developed for a wheel slip ratio control system for commercial vehicles with sluggish braking actuators to replace conventional if-then rule-like ABS control laws. New techniques overcome the tendency of sliding mode controllers to chatter. Computer simulation (hardware-in-the-loop simulation) and actual vehicle tests verified the effectiveness of this method to suppress chattering and keep the wheel slip ratio in a desirable range during braking on low-friction road surfaces.