Measuring quality of service in dial-a-ride operations: the case of a Canadian city

In many countries, dial-a-ride services are provided by public authorities to elderly and handicapped people who cannot use regular transit. Cost minimization is key to running these services, but one can observe a growing interest in quality measurement and improvement. A first step in improving quality is to define a quality measurement scale specific to dial-a-ride services. A second step is to incorporate quality measurements in mathematical models that serve as a basis for optimization algorithms. To this end, an extensive survey of dial-a-ride users was conducted in Longueuil, the largest suburb of Montreal, Canada. This paper describes the steps of the survey and presents its main conclusions: (1) 56 attributes were identified based on interviews, (2) the questionnaire developed has proved to be reliable and valid, (3) an exploratory factor analysis allowed us to determine 13 dimensions of quality in dial-a-ride services, (4) the most important criteria for users were identified, and (5) population segmenting variables by which subgroups of users can be categorized were also determined. Managerial implications of our results are also discussed.     

Modelling of wheels and rail discontinuities in dynamic wheel-rail contact analysis

A classification of wheel-rail contact is given. Difference is made between modelling of a running wheel with continuous single-point-contact, as is common practice in wheel-rail contact analysis, and a wheel with transient double- or multi-point-contact, which may occur for rail irregularities with curvatures larger than that of the wheel circumference. It is shown that application of the first model for these irregularities will strongly underestimate the contact forces as it does not describe occurring mechanisms correctly. Further, it is shown that in principle it is not possible to describe the second type of contact fully correct with a lumped wheel model. Both wheel models are formulated mathematically for some basic contact cases. Afterwards, results are applied to a linear track model. Analytical closed-form solutions are found in the frequency domain for arbitrary type of contact and numerically transformed to the time domain. Finally, the necessity is shown to avoid situations where transient multiple-point-contact may occur (like rail joints) in practice.     

On the numerical accuracy of the prediction of resistance coefficients in ship stern flow calculations

This article presents a study on the accuracy of the numerical determination of the friction and pressure resistance coefficients of ship hulls. The investigation was carried out for the KVLCC2 tanker at model- and full-scale Reynolds numbers. Gravity waves were neglected, i.e., we adopted the so-called double-model flow. Single-block grids with H–O topology were adopted for all the calculations. Three eddy viscosity models were employed: the one-equation eddy viscosity and the two-equation models proposed by Menter and the TNT version of the two-equation k-ω model. Verification exercises were performed in sets of nearly geometrically similar grids with different densities in the streamwise, normal, and girthwise directions. The friction and pressure resistance coefficients were calculated for different levels of the iterative error and for computational domains of different size. The results show that on the level of grid refinement used, it is possible to calculate the viscous resistance coefficients in H–O grids that do not match the ship contour with a numerical uncertainty of less than 1%. The differences between the predictions of different turbulence models were larger than the numerical uncertainty; however, these differences tended to decrease with increases in the Reynolds number. The pressure resistance was remarkably sensitive to domain size and far-field boundary conditions. Either a large domain or the application of a viscous–inviscid interaction procedure is needed for reliable results. This work was presented in part at the International Conference on Computational Methods in Marine Engineering—MARINE 2007, Barcelona, June 3–4, 2007.     

Technology Choice and Productivity in the Turkish merchant fleet in the last two decades

Sea transportion has become a significant sector in Turkey since the early 1980s. It has developed due to the domestic subsidies provided and also because of the favourable conjuncture in the world ship Sale and Purchase markets in this period. In the 1990s this sector has started to gain some self-confidence and has completed the 'Infant Inudustry' period. However, bacause its structure is open to international competition, the protection policies available in the 1980s have been found to be inadequate. The capacity of the Turkish merchant fleet has expanded to a considerable extent in the last two decades, but it is comprised of over-aged and old fashioned ships built using outdated technology. and a sudden and cat-astrophic crisis could be approaching. A precaution in the long run could be to have special types of ships carrying convenient loads at minimum costs.     

Gas transfer velocities of CO2 and CH4 in a tropical reservoir and its river downstream

We have measured simultaneously the methane (CH₄) and carbon dioxide (CO₂) surface concentrations and water–air fluxes by floating chambers (FC) in the Petit-Saut Reservoir (French Guiana) and its tidal river (Sinnamary River) downstream of the dam, during the two field experiments in wet (May 2003) and dry season (December 2003). The eddy covariance (EC) technique was also used for CO₂ fluxes on the lake. The comparison of fluxes obtained by FC and EC showed little discrepancies mainly due to differences in measurements durations which resulted in different average wind speeds. When comparing the gas transfer velocity (k₆₀₀) for a given wind speed, both methods gave similar results. On the lake and excluding rainy events, we obtained an exponential relationship between k₆₀₀ and U₁₀, with a significant intercept at 1.7 cm h^− 1, probably due to thermal effects. Gas transfer velocity was also positively related to rainfall rates reaching 26.5 cm h⁻¹ for a rainfall rate of 36 mm h^− 1. During a 24-h experiment in dry season, rainfall accounted for as much as 25% of the k₆₀₀. In the river downstream of the dam, k₆₀₀ values were 3 to 4 times higher than on the lake, and followed a linear relationship with U₁₀.     

Practicability study on the suitability of artificial,neural networks for the approximation of unknown steering torques

For steer-by-wire systems, the steering feedback must be generated artificially due to the system characteristics. Classical control concepts require operating-point driven optimisations as well as increased calibration efforts in order to adequately simulate the steering torque in all driving states. Artificial neural networks (ANNs) are an innovative control concept; they are capable of learning arbitrary non-linear correlations without complex knowledge of physical dependencies. The present study investigates the suitability of neural networks for approximating unknown steering torques. To ensure robust processing of arbitrary data, network training with a sufficient volume of training data is required, that represents the relation between the input and target values in a wide range. The data were recorded in the course of various test drives. In this research, a variety of network topologies were trained, analysed and evaluated. Though the fundamental suitability of ANNs for the present control task was demonstrated.     

Supply and demand for the Eastern Canadian Arctic Sealift

The annual sealift of cargo to the Canadian Arctic has long been an essential part of the livelihood of Inuit communities. Over the past two decades, many structural changes were brought to this service and the demand has grown substantially. This paper aims to provide a better understanding of these changes by analysing demand and supply for Eastern Canadian Arctic sealift services. This analysis is based on Canadian Coast Guard vessel movement data and Statistics Canada port traffic data. It reveals that between 1987 and 2010, continuous and extreme variations in demand made it quite difficult for ship operators to adjust carrying capacity and optimise productivity. Yet, the recent industrial and population growth in the region has enabled them to reach significant gains in fleet utilisation levels.     

A multinomial logit car use model for a megacity of the developing world: Istanbul

The increase in motor vehicle use is one of the important factors that cause traffic congestion, especially in megacities. Thus, the reasons behind this increase require serious attention. This paper offers an analysis of this kind, for a megacity from the developing world, Istanbul. A stratified multinomial logit model accounting for the availability of a second vehicle in the household is estimated for a sample drawn from a questionnaire to gather information of actual car use in Istanbul. This estimation is only possible through a unique data generation process that converts actual preferences into a choice study setting. In addition, a simulation study, generally utilized in the analyses of discrimination between certain layers of society, and a scenario analysis related to changes in income are also included in the paper for a better understanding of the nature of the topic. The results show that the behavior of households with a second vehicle available and not available varies significantly due to household, individual and professional-related characteristics.     

Autonomous vehicles: scientometric and bibliometric review*

ABSTRACT

This paper presents a scientometric and bibliometric review of the research on autonomous vehicles (AVs) to identify its main characteristics, evolution, and potential trends for future studies. Relevant articles were searched on WoS, yielding a research corpus of 10,580 papers, and the software CiteSpace was subsequently used for analysis. The results showed that AV research is heterogeneous and registered a growing demand over time. Multidisciplinarity is present, with 96 science fields being identified. As in any other sector, it is necessary to understand broader aspects of this industry such as the market factors surrounding it, as well as other economic and managerial issues. In this sense, we observed a migration of the research field from multidisciplinarity to pluridisciplinarity with a greater number of studies focusing on the latter. We understand that terminology standardisation contributes to achieving pluridisciplinarity. As such, it is important to highlight that sustainability, public policies, liability, and safety, as well as business issues such as performance and business models are some of the tendencies in the field of AVs. For future studies, we suggest a more in-depth analysis of publications in terms of individual search terms, as well as the sub-areas identified as trends in this paper.