New method for predicting full-scale power performance of pumpjet propulsion system based on statistical learning北大核心CSCD

[目的]针对“适配于螺旋桨的船尾线型+泵喷推进器”构成的船舶泵喷推进系统,提出一种基于统计学习的实船快速性预报新方法。[方法]以某大型水面船舶泵喷推进系统为对象,通过神经网络学习典型推进泵的推力系数图谱曲线,综合运用船-桨配合时的K_(T)-J曲线和船体-喷泵配合时的推力特性曲线,建立“仅需船舶阻力曲线就能实现船舶泵喷推进系统实船快速性预报”的新方法,并基于船模阻力试验、泵喷模型敞水试验及船体-泵喷自航试验的测量换算结果对实船推进性能的预报结果开展精度校验。[结果]校验结果表明:在航速18~30 kn范围内,船舶泵喷推进系统的自航转速、推力和功率的预报误差可控制在5.4%以内,其中设计航速附近的误差甚至小于2%;船体-泵喷的相互作用程度介于船-桨与船体-喷泵之间且幅值相对较小,推力减额系数为趋向于0的极小值,故船舶泵喷推进系统是介于桨轴推进系统和喷水推进系统之间的产物。[结论]该预报方法有利于提升船舶泵喷推进系统实船快速性预报的能力,可为新型舰艇泵类推进系统总体设计/研究提供参考。     

A selection method of offshore production systems considering uncertainties

Journal of Marine Science and Technology - The development of an offshore deepwater oilfield is a complex and risky task. One core problem in this project is the selection of a production system...     

Determinants of airport retail revenue: a review of literature

ABSTRACT

As the airport retail industry continues to grow due to increasing travel demands, airport operators are increasingly developing their retail revenue potential to ensure financial viability. This study aims to provide a review of airport retail literature and identify the salient factors associated with passenger shopping behaviour. The paper presents a review of contemporary airport retail literature, covering a total of 50 studies from 1998 to 2018. The review identified 26 factors, which could broadly be grouped into five categories: airport/operator related; passengers' demographic related; passengers’ travel related; passengers’ psychological related and passengers’ resources related. In addition to providing a summary of the statistically significant factors across studies, the review identifies and discusses potential approaches for future research. These include the importance of considering both “to spend or not” decision and how much to spend and how most empirical studies focussed on the former; the gap in empirical analysis on the impact of airport terminal design layout on retail performance; and the gap in application of general consumer shopping behavioural models to airport retail problems. The paper concludes with the suggestion that we can build on the existing studies to develop a hybrid approach to solve several of the identified gaps simultaneously.     

A comparison of modelled and real-life driving profiles for the simulation of railway vehicle operation

A key factor in determining the performance of a railway system is the speed profile of the trains within the network. There can be significant variation in this speed profile for identical trains on identical routes, depending on how the train is driven. A better understanding and control of speed profiles can therefore offer significant potential for improvements in the performance of railway systems. This paper develops a model to allow the variability of real-life driving profiles of railway vehicles to be quantitatively described and predicted, in order to better account for the effects on the speed profile of the train and hence the performance of the railway network as a whole. The model is validated against data from the Tyne and Wear Metro, and replicates the measured data to a good degree of accuracy.     

A new approach for improving the performance of freight train timetabling of a single-track railway system

A new approach for improving the performance of freight train timetabling for single-track railways is proposed. Using the idea of a fixed-block signaling system, we develop a matrix representation to express the occupation of inter- and intra-station tracks by trains illustrating the train blocking time diagram in its entirety. Train departure times, dwell times, and unnecessary stopping are adjusted to reduce average train travel time and single train travel time. Conflicts between successive stations and within stations are identified and solved. A fuzzy logic system is further used to adjust the range of train departure times and checks are made to determine whether dwell times and time intervals can be adjusted for passenger and freight trains at congested stations to minimize train waiting times. By combining manual scheduling expertise with the fuzzy inference method, timetable efficiency is significantly improved and becomes more flexible.     

Disturbance Observer-Based Sideslip Angle Control for Improving Cornering Characteristics of In-Wheel Motor Electric Vehicles

In this paper, a robust sideslip angle controller based on the direct yaw moment control (DYC) is proposed for in-wheel motor electric vehicles. Many studies have demonstrated that the DYC is one of the effective methods to improve vehicle maneuverability and stability. Previous approaches to achieve the DYC used differential braking and active steering system. Not only that, the conventional control systems were commonly dependent on the feedback of the yaw rate. In contrast to the traditional control schemes, however, this paper proposes a novel approach based on sideslip angle feedback without controlling the yaw rate. This is mainly because if the vehicle sideslip angle is controlled properly, the intended sideslip angle helps the vehicle to pass through the corner even at high speed. On the other hand, the vehicle may become unstable because of the too large sideslip caused by unexpected yaw disturbances and model uncertainties of time-varying parameters. From this aspect, disturbance observer (DOB) is employed to assure robust performance of the controller. The proposed controller was realized in CarSim model described actual electric vehicle and verified through computer simulations.     

New Optimal Power Management Strategy for Series Plug-In Hybrid Electric Vehicles

Recently Plug-in hybrid electric vehicles (PHEVs) have gained increasing attention due to their ability to reduce the fuel consumption and emissions. In this paper a new efficient power management strategy is proposed for a series PHEV. According to the battery state of charge (SOC) and vehicle power requirement, a new rule-based optimal power controller with four different operating modes is designed to improve the fuel economy of the vehicle. Furthermore, the teaching-learning based optimization (TLBO) method is employed to find the optimal engine power and battery power under the specified driving cycle while the fuel consumption is considered as the fitness function. In order to demonstrate the effectiveness of the proposed method, four different driving cycles with various numbers of driving distances for each driving cycle are selected for the simulation study. The performance of the proposed optimal power management strategy is compared with the rule-based power management method. The results verify that the proposed power management method could significantly improve the fuel economy of the series PHEV for different driving conditions.     

Effect of Hydrothermal Aging over a Commercial DOC on NO<Subscript>2</Subscript> Production and Subsequent SCR Efficiency

In this study, the effect of hydrothermal aging over a commercial diesel oxidation catalyst (DOC) on deterioration in nitrogen dioxide (NO₂) production activity has been experimentally investigated based on a micro-reactor DOC experiment. Through this experimental result, the NO₂ to nitrogen oxides (NOx) ratio at DOC outlet has been mathematically expressed as a function of DOC temperature according to various aging conditions. The current study reveals that the catalyst aging temperature is a more dominant factor than the aging duration in terms of the decrease in NO₂ production performance through DOC. The DOC sample hydrothermally aged for 25 h at 750 °C has displayed the lowest NO₂ to NOx ratio compared to the samples aged for 25 ~ 100 h at 650 °C. Also, in this study, the impact of hydrothermal aging of a DOC on the selective catalytic reduction (SCR) efficiency in a ‘DOC + SCR’ aftertreatment system was predicted by using transient SCR simulations. To validate the SCR simulation, this study has conducted a dynamometer test of a non-road heavy-duty diesel engine with employing a commercial ‘DOC + SCR’ system on the exhaust line. The current study has quantitatively estimated the effect of the variation in NO₂ to NOx ratio due to the hydrothermal aging of DOC on the NOx removal efficiency of SCR.     

Detection of Cognitive and Visual Distraction Using Radial Basis Probabilistic Neural Networks

This paper suggests a real-time method for detecting a driver’s cognitive and visual distraction using lateral driving performance measures. The algorithm adopts radial basis probabilistic neural networks (RBPNNs) to construct classification models. In this study, combinations of two driving performance data measures, including the standard deviation of lane position (SDLP) and steering wheel reversal rate (SRR), were considered as measures of distraction. Data for training and testing the RBPNN models were collected under simulated conditions in which fifteen participants drove on a highway. While driving, they were asked to complete auditory recall tasks or arrow search tasks to create cognitively or visually distracted driving periods. As a result, the best performing model could detect distraction with an average accuracy of 78.0 %, which is a relatively high accuracy in the human factors domain. The results demonstrated that the RBPNN model using SDLP and SRR could be an effective distraction detector with easy-to-obtain and inexpensive inputs.     

Feature-Based Cad System Buildup for Passenger Airbag Design

The passenger airbag (PAB) requires a large volume and fast deployment because of the large distance between the dashboard and the passenger. And various shapes and sizes of the PAB are required depending on the type of vehicle. However, since the PAB modeling process for each design change is complicated and time consuming, the design parameters of the PAB could not be well investigated. In this study, a unique feature-based CAD system has been proposed that easily constructs PAB CAD model and then generates PAB FE model for collision analysis. Main keypoints and widths of PAB that determine the shape and size have been extracted by analyzing the geometric-feature of airbag. The PAB CAD model can be easily constructed by inputting keypoints and widths information. Then, from the constructed PAB CAD model, the PAB FE model is automatically generated. Finally, the generated PAB FE model can be directly employed for collision analysis, thereby reducing the modeling time of the PAB and enabling efficient parametric studies on design.