Urban transportation modeling: The discussion continues

This article is a response to John Polak's article, entitled, A Comment on Supernak's Critique of Transport Modeling, published elsewhere in this issue of TRANSPORTATION. It offers necessary clarifications to the issues discussed in an earlier article in this journal (Supernak, 1983). It also responds to the philosophical issues discussed in Polak's article, such as the nature of transport phenomena, and the role, form and methodology of transport modeling.     

Bus Priority Using pre-signals

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling.     

Innovative strategies for urban car-sharing systems and a simulator to assess their performance

In this paper, three innovative car-sharing systems for urban areas are proposed, based on fleets of individual intelligent vehicles with three service characteristics: instant access, open-ended reservations and one-way trips. These features provide high flexibility but create an uneven distribution of vehicles among stations. Therefore, relocation of vehicles must be performed. Three different system procedures are proposed: in the first system, relocations are performed by users; in the other two, vehicles relocate automatically, thanks to their automation. In the first two systems, vehicles are accessible only at stations, whereas in the third they are also accessible along roads. In order to provide transport managers with a tool to test systems in different realities, an object-oriented simulator is developed. The simulation provides outputs of system performance, in terms of user waiting times and system efficiency. The proposed systems are simulated for the city of Genoa, in Italy, and a comparative analysis is presented.     

Coastal management issues for the mouth of the river murray,South Australia

Abstract

This paper examines the management issues relating to the potential closure of the mouth of Australia's largest river. The importance of maintaining the river mouth is outlined, together with the implications of restricted river flow and the management response following the most recent closure of the mouth in 1981. One of the major unresolved issues is the question of responsibility and funding, which has arisen because of overlapping jurisdictions on either side of the river mouth and a lack of jurisdiction f or the mouth itself, which is an administrative boundary.     

On the use of mathematical programming in the evaluation of transport policies

This paper focuses on the evaluation processes by which decisions regarding transportation alternatives can be assisted. A multidimensional approach usually called multiple criteria decision making is required to represent the complexity of transportation policy and systems.

The multiple criteria decision making techniques can be divided into two groups. The first is based on a ranking scheme approach and the second on a mathematical programming approach.

A multiple objective mathematical programming procedure known as Goal Programming is presented. The authors examined the use of that procedure in real transportation problems.

The results suggest that multiple objective mathematical programming techniques in general do not appear to be appropriate in transportation policy analysis involving mutually exclusive alternatives. Their use can be limited to special cases in the private sector.     

Vehicle sensor data-based analysis on the driving style differences between operating indoor simulator and on-road instrumented vehicle

Abstract

Indoor simulator and on-road instrumented vehicle are the most popular ways to analyze driving behaviors by using collected Vehicle Sensor Data (VSD). However, for a same driver, the driving performance could be different in the real world and in the simulated world. Even though many studies have been conducted to discover the differences of driving behaviors in these two circumstances, little research has focused on analyzing the differences in driving style, which can provide more integrated knowledge of a driver from the natural structure, stimulus–response mechanism, of driving behaviors. Therefore, in this paper, the driving styles in both the real world and the simulated world are extracted by implementing the nonnegative matrix factorization method on the collected VSD data. Through this analysis, the driving style differences can be quantitatively described and discussed in detail. It is found that the drivers tend to be more unstable and sometimes aggressive when driving the simulator and the deviation in the perception of temporal gap in two circumstances is also discovered. The research findings are particularly valuable to calibrate the driving simulator and construct more reliable driving behavior models.     

Towards connected autonomous driving: review of use-cases

Connected autonomous vehicles are considered as mitigators of issues such as traffic congestion, road safety, inefficient fuel consumption and pollutant emissions that current road transportation system suffers from. Connected autonomous vehicles utilise communication systems to enhance the performance of autonomous vehicles and consequently improve transportation by enabling cooperative functionalities, namely, cooperative sensing and cooperative manoeuvring. The former refers to the ability to share and fuse information gathered from vehicle sensors and road infrastructures to create a better understanding of the surrounding environment while the latter enables groups of vehicles to drive in a co-ordinated way which ultimately results in a safer and more efficient driving environment. However, there is a gap in understanding how and to what extent connectivity can contribute to improving the efficiency, safety and performance of autonomous vehicles. Therefore, the aim of this paper is to investigate the potential benefits that can be achieved from connected autonomous vehicles through analysing five use-cases: (i) vehicle platooning, (ii) lane changing, (iii) intersection management, (iv) energy management and (v) road friction estimation. The current paper highlights that although connectivity can enhance the performance of autonomous vehicles and contribute to the improvement of current transportation system performance, the level of achievable benefits depends on factors such as the penetration rate of connected vehicles, traffic scenarios and the way of augmenting off-board information into vehicle control systems.     

Reduced dwell times resulting from train–platform improvements: the costs and benefits of improving passenger accessibility to metro trains

Abstract

This paper examines whether a dwell time reduction on a high-intensity metro service, as a result of a series of accessibility enhancements, can contribute to an increased level of service and accessible public transport for passengers together with a reduction in costs for the operator. Actual train operation data were collected by on-site observations and from London Underground Ltd. A simple simulation is built to represent the effect on the overall cycle times of trains if certain parameters (e.g. dwell time) are changed. Four models are developed, concerning: (1) step height between train and platform, (2) an assumption of passenger service time to be no longer than 20 s, (3) door width and (4) the combination of step height and door width. From the application of the models it appears that the fourth model provides the highest reduction in dwell time and diminishes the overall cycle times of trains. However, it is the most expensive to implement as it requires work to raise platforms and the purchase of new rolling stock.     

What determines commute time choices? A structural equation modelling approach

Abstract

Many researchers have been attracted by the phenomenon of constant travel time, and the time spent on travel has been an important indicator of understanding travellers’ behaviours. This paper is based on a survey conducted in a university in London which includes both objective and subjective variables in relation to commute time and some demographic characteristics. Two conceptual structural models are examined in order to explore the factors determining travellers’ choices. Results of the analysis reveal some interesting relationships: (1) a positive relationship between age and commute time; (2) females are more likely to read or listen to music during their journeys, and their ideal commute time (ICT) and current commute time (CCT) generally tend to be longer; (3) academic staff tend to have the habit of working during their commute, administrative staff tend to commute longer while students tend to spend a shorter time commuting; (4) normally, a habit while travelling is significantly associated with CCT; those with a habit of reading or working during their commute journey tend to have longer commute times and (5) the relationship between CCT and commuters’ ICT and tolerable commute time is positive; both hypothesised causal relationships are significant so that a loop is formed between subjective and objective variables, and thus a dynamic modelling process could be envisaged as temporal sequences of those variables.     

新型压接式IGBT模块的结构设计与特性分析

介绍了一种新型压接式绝缘栅双极型晶体管(Insulated Gate Bipolar Transistor,简称IGBT)模块的内部结构设计,分析其相对于传统IGBT模块的优势,并通过静态和动态测试分析了其电气性能特点,展示了其良好的特性以及广阔的应用范围。