试析荻生徂徕关于汉语教育的理论与实践

荻生徂徕是日本江户时代最名的思想、学家和古辞家，同时还是一位出色的汉语教育家。他分析了汉语和日语语言系统的差别，提出从汉语语音教育着手，逐渐增加词汇量，通过大量阅读汉原的实践，最后能够如中国人一样阅读汉书籍。     

多平台信息源的JDBC解决方案

作者阐述了利用JDBC技术解决查询多平台信息源的方法,通过对实验室模拟环境下探索性开发的探讨,提出了使用Servlet与Applet相结合的解决方案。     

高速公路路堤和路面软基病害检测及加固处理

某高速公路 K1 0 4 2 0 0～K1 0 6 5 0 0段穿过鱼塘 ,路堤采用钢渣水中挤淤法施工 ,通车后路面出现了严重的纵向裂缝、车辙、沉陷 ,影响了路面的使用性能 ,同时路堤存在滑动的隐患 ,必须进行加固处理。为此 ,首先通过系统检测 ,分析路面裂缝产生的原因 ,然后提出针对性的加固处理方案 ,最终实施加固处理施工 ,所取得的成果对其它高速公路的维修加固具有参考价值     

基于VBA的沥青最佳用量数据处理系统

沥青最佳用量是提高公路路面质量的前提之一。本研究的目的是开发出一个数据处理系统，它建立在最小二乘法基础上，能对热拌沥青混合料的马歇尔试验数据进行自动处理，得出最佳沥青用量OAC1和OAC2，并自动生成试验报告，便于施工现场管理。     

Performance Evaluation of Hybrid-Drive Buses and Potential Fuel Savings in Brazilian Urban Transit

Transporting more than 55 million passengers per day, buses are the main transit mode in Brazil. Most of these vehicles use diesel oil and this situation causes dependence on oil, extensive greenhouse gas emissions and increasing air pollution in urban areas. In order to improve this situation the options for Brazilian cities include the use of alternative fuels and new propulsion technologies, such as hybrid vehicles. This article proposes a procedure for evaluating the performance of a recently developed Brazilian hybrid-drive technology. A simple procedure is presented to compare hybrid-drive buses with conventional diesel buses in urban operation focusing on fuel economy and the potential for reducing diesel oil consumption through the use of hybrid-drive buses. Field tests carried out by the authors indicate that fuel consumption improvement through the use of hybrid-drive buses would certainly exceed 20%, resulting in lower fuel costs and reduced carbon dioxide (CO₂) emissions.     

Isolating high-priority metro and feeder bus transfers using smart card data

Fixed-rail metro (or ‘subway’) infrastructure is generally unable to provide access to all parts of the city grid. Consequently, feeder bus lines are an integral component of urban mass transit systems. While passengers prefer a seamless transfer between these two distinct transportation services, each service’s operations are subject to a different set of factors that contribute to metro-bus transfer delay. Previous attempts to understand transfer delay were limited by the availability of tools to measure the time and cost associated with passengers’ transfer experience. This paper uses data from smart card systems, an emerging technology that automatically collects passenger trip data, to understand transfer delay. The primary objective of this study is to use smart card data to derive a reproducible methodology that isolates high priority transfer points between the metro system and its feeder-bus systems. The paper outlines a methodology to identify transfer transactions in the smart card dataset, estimate bus headways without the aid of geographic location information, estimate three components of the total transfer time (walking time, waiting time, and delay time), and isolate high-priority transfer pairs. The paper uses smart card data from Nanjing, China as a case study. The results isolate eight high priority metro-bus transfer pairs in the Nanjing metro system and finally, offers several targeted measures to improve transfer efficiency.     

In search of surrogate safety indicators for vulnerable road users: a review of surrogate safety indicators

Surrogate indicators are meant to be alternatives or complements of safety analyses based on accident records. These indicators are used to study critical traffic events that occur more frequently, making such incidents easier to analyse. This article provides an overview of existing surrogate indicators and specifically focuses on their merit for the analyses of vulnerable road users and the extent to which they have been validated by previous research. Each indicator is evaluated based on its ability to consider the collision risk, which can be further divided into the initial conditions of an event, the magnitude of any evasive action and the injury risk in any traffic event. The results show that various indicators and their combinations can reflect different aspects of any traffic event. However, no existing indicator seems to capture all aspects. Various studies have also focused on the validity of different indicators. However, due to the use of diverse approaches to validation, the large difference in how many locations were investigated and variations in the duration of observation at each location, it is difficult to compare and discuss the validity of the different surrogate safety indicators. Since no current indicator can properly reflect all the important aspects underlined in this article, the authors suggest that the choice of a suitable indicator in future surrogate safety studies should be made with considerations of the context-dependent suitability of the respective indicator.     

Evaluating air emission inventories and indicators from cruise vessels at ports

This paper provides an estimation of air emissions (CO₂, NO_X, SO_X and PM) released by cruise vessels at the port level. The methodology is based on the “full bottom-up” approach and starts by evaluating the fuel consumed by each vessel on the basis of its individual port activities (manoeuvring, berthing and hoteling). The Port of Barcelona was selected as the site at which to perform the analysis, in which 125 calls of 30 cruise vessels were monitored. Real-time data from the automatic identification system (AIS), factor emissions from engine certificates and vessel characteristics from IHS Sea-web database were also collected for the analysis. The research findings show that the most appropriate indicators are inventory emissions per “port-time gross tonnage”, “port-time passenger” and “port time”. These emission indicators improve our understanding of cruise emissions and will facilitate the work that aims to estimate reliably and quickly the in-port ship emission inventories of cruise ports.     

Numerical study on active wave devouring propulsion

The possibility of extracting energy from gravity waves for marine propulsion was numerically studied by a two-dimensional oscillating hydrofoil in this study. The commercially available computational fluid dynamics software FLUENT was used for the unstructured grid based on the Reynolds-average Navier?CStokes equation. The free surface waves and motion of the flapping foil were implemented by customizing the FLUENT solver using a user-defined function technique. In addition, dynamic mesh technology and post processing capabilities were fully utilized. The validation of the model was carried out using experimental data for an oscillation hydrofoil under the waves. The results of the simulation were investigated in detail in order to explain the increase of propeller efficiency in gravity waves. Eight design parameters were identified and it was found that some of them greatly affected the performance of wave energy extraction by the active oscillating hydrofoil. Finally, the overall results suggested that when the design parameters are correctly maintained, the present approach can increase the performance of the oscillating hydrofoil by absorbing energy from sea waves.     

沥青搅拌设备燃烧系统的使用维护及故障排查研究

随着我国公路建设的快速发展，越来越多的施工技术应用于公路的建设中，因此施工设备面临着很大的挑战。针对施工中沥青搅拌设备燃烧系统发生的开启风门较大、设备内部阀芯被杂质或者油品堵塞以及无法点火等问题进行了细致的探讨，分析故障排查方法，以保障路面施工不受影响。