Distribution of suspended sediment in the coastal sea off the Ganges–Brahmaputra River mouth: observation from TM data

Remote sensing technique was applied to estimate suspended sediment concentration (SSC) and to understand transportation, distribution and deposition of suspended sediment in the estuary and throughout the coastal sea, off the Ganges–Brahmaputra River mouth. During low river discharge period, zone of turbidity maximum is inferred in the estuary near the shore. SSC map shows that maximum SSC reaches 1050 mg/l in this period. Magnitude of SSC is mainly owing to resuspension of the bottom surface sediments induced by tidal currents flowing over shallow water depths. The influence of depth on resuspension is farther revealed from the distribution and magnitude of SSC along the head of Swatch of No Ground (SNG) submarine canyon. During high river discharge period, huge river outflow pushed the salt wedge and flashes away the suspended sediments in the coastal sea off the river mouth. Zone of turbidity maximum is inferred in the coastal water approximately within 5–10 m depth of water, where the maximum SSC reaches 1700 mg/l. In this period, huge fluvial input of the suspended sediments including the resuspended bottom sediments and the particles remaining in suspension for longer period of time since their initial entry control mainly the magnitude of SSC. In the estuary near the shore, seasonal variation in the magnitude of SSC is not evident. In the coastal sea (>5 m water depth), seasonal influence in the magnitude of SSC could be concluded from the discrepancy between SSC values of two different seasons. Transportation and deposition of suspended sediments also experiences seasonal variations. At present, suspended sediments are being accumulated on the shallow shelf (between 5 and 10 m water depth) in low discharge period and on the mid-shelf (between 10 and 75 m water depth) during high discharge period. An empirical (exponential) relationship was found between gradual settle down of suspended sediments in the coastal sea and its lateral distance from the turbidity maximum.     

Numerical study on active wave devouring propulsion

The possibility of extracting energy from gravity waves for marine propulsion was numerically studied by a two-dimensional oscillating hydrofoil in this study. The commercially available computational fluid dynamics software FLUENT was used for the unstructured grid based on the Reynolds-average Navier?CStokes equation. The free surface waves and motion of the flapping foil were implemented by customizing the FLUENT solver using a user-defined function technique. In addition, dynamic mesh technology and post processing capabilities were fully utilized. The validation of the model was carried out using experimental data for an oscillation hydrofoil under the waves. The results of the simulation were investigated in detail in order to explain the increase of propeller efficiency in gravity waves. Eight design parameters were identified and it was found that some of them greatly affected the performance of wave energy extraction by the active oscillating hydrofoil. Finally, the overall results suggested that when the design parameters are correctly maintained, the present approach can increase the performance of the oscillating hydrofoil by absorbing energy from sea waves.     

Reduction of skin friction by microbubbles and its relation with near-wall bubble concentration in a channel

Determination of the flow structure near the wall is essential for a clear insight into the phenomenon of skin friction reduction by microbubbles in a turbulent boundary layer. An important parameter, is the bubble concentration or void fraction in the wall region in drag-reducing conditions. The purpose of this paper is to show drag-reducing effects due to microbubbles in a water channel and, more importantly, to show the dependence of the drag-reduction values on the near-wall void fraction. A two-dimensional channel with an aspect ratio of 10 was specially built for this purpose with provisions for air injection through porous plates. Skin friction was directly measured by a miniature floating element transducer with a 5-mm circular sensing disk mounted flush on the top wall 67 channel-heights downstream of the injector. The wall friction in the presence of air bubbles was found to be reduced under the same bulk velocity when compared with the value without air. Detailed void fraction profiles across the channel were obtained by a sampling probe and a fiber-optic probe. Better collapse of the drag reduction data, independent of different profile shapes, was found when plotted against the near-wall void fraction than against a cross-sectional mean void fraction. While this dependence reconfirms that the phenomena are essentially inner-region dependent, the lack of influence of the bubble distribution patterns away from the wall implies lack of outer region influence.     

A study on improving the course-keeping ability of a pure car carrier in windy conditions

The course-keeping ability of a pure car carrier (PCC) in windy conditions is discussed in this article. Numerical simulations of two PCCs were carried out to compare their course-keeping abilities in wind. The two PCCs had the same hull form but different types of rudder. One PCC was fitted with a semispade rudder (hereinafter, the normal rudder), whereas the other was fitted with a spade-type Schilling rudder (hereinafter, the Schilling rudder). Both PCCs were designed to a new concept for the accommodation structure and hull form above the load water line. In this new design concept, there are no sharp corners in the superstructure so as to reduce wind resistance and improve steering performance. The limits of course keeping for the two PCCs were investigated through simulations. The course-keeping abilities of the two PCCs, each with two different types of autopilot system, were also investigated in wind. To develop the numerical simulation, the hydrodynamic coefficients of the two PCCs were predicted based on the data published for a third PCC having similar principal particulars. The numerical model of the two PCCs was validated by comparing its behavior with the respective full-scale trial results. Wind resistance coefficients were predicted by combining the results of wind tunnel experiments of the object PCCs and a regression model. Numerical simulations under steady wind conditions were also carried out and the results compared with some full-scale experiments to validate the mathematical model of the PCC.     

A new functional optimization method applied to the pitch distribution of a marine propeller

Based on Hilbert space theory, an infinite-dimensional optimization method to find the optimal pitch distribution of marine propellers was developed. Thereby, the three-dimensional effect of induced velocity could effectively be controlled in an optimal way; i.e., an investigation was carried out to learn whether the present method is applicable to the design of marine propellers, especially pitch distributions, by maximizing the propeller efficiency functional. In addition, with the help of Hilbert space theory, it was successfully shown that the optimization method developed has a unique mathematical solution. In this work, only the pitch distribution was optimized, while other parameters such as the camber and thickness of the trial propeller remained as in the original. With a numerical study, it is shown that the present optimization method gives an optimal pitch distribution, the open-water characteristic curve being superior to the original curve. Received: August 24, 2000 / Accepted: July 16, 2001     

Optimum routing of a sailing wind farm

To acquire the wind energy of the oceans, a sailing wind farm has been proposed. The wind farm considered is composed of a semisubmersible floating structure, 11 windmills, four sails, six thrusters, and storage for hydrogen. To maximize the acquired energy, an effective algorithm to search for optimum routes was developed. The algorithm is based on the fact that beam winds yield a maximum of acquired energy. This feature reduces the computation time, and, consequently, efficient route optimization becomes possible in a reasonable time. After setting an operational area for the wind farm, navigation simulations for a 1-year period were carried out. A numerical weather forecast was used as well as the responses of the floating structure, such as the speed of the structure, the output power of the windmills, and the time of course changes. In the simulation, the wind farm evades rough seas to avoid structural damage, and an optimum route is searched for. The capacity factor of the system was used to evaluate the efficiency of the optimized routes. From the simulations, the maximum capacity factor achieved was 42.6%. The dependency of the capacity factor on the initial position of the wind farm was also examined. It was shown that offshore from Sanriku in northeastern Japan is an area suited to the operation of the wind farm. The effect of the initial position on consecutive periods of operation is discussed.     

Voluntary CO2 emissions reduction scheme: Analysis of airline voluntary plan in Japan

This paper discusses voluntary CO₂ emissions reduction schemes and, in particular focuses on the voluntary plan by the Japanese airline industry. Econometric analysis identifies statistically significant improvement of 3–4% in CO₂ emissions intensity (CO₂/RPK) subsequent to initiation of the voluntary plan in 1998.     

GIS-aided prediction for sea-ice distribution

A method of applying the geographic information system (GIS) to predict sea-ice distribution is proposed. The prediction computations are performed using the distributed mass/discrete floe (DMDF) model. The GIS is used to prepare the initial data for the DMDF model, and to display the simulation results together with a digital map and observational data for evaluation and further use. Two areas in the Arctic Ocean were selected to test the computations in this study. The results of the case studies show that this method can help with (1) free-area and free-scale prediction fitting for various purposes, (2) a high-resolution output to provide more detailed data, and (3) a reasonable combination of different data sets to make the best use of the information obtained. The results also suggest that the DMDF model is a good simulation of the ice motion not only for large-scale but also for local-scale predictions. Received: March 19, 2002 / Accepted: June 20, 2002 Acknowledgments. This study was financially supported by the Japan Science and Technology Corporation. The SSM/I sea-ice data were obtained from the EOSDIS NSIDC Distributed Active Archive Center (NSIDC DAAC), University of Colorado at Boulder. The authors thank the persons concerned. Address correspondence to: H. Yamaguchi (yama@fluidlab.naoe.t.u-tokyo.ac.jp)     

Experimental study on microbubble ejection method for frictional drag reduction

The formation of air bubbles ejected through a single hole in a flat plate was observed in uniform flow of 2–10 m/s It was confirmed that the size of the air bubbles was governed by main flow velocity and air flow rate. According to previous experiments, the size of the bubbles is an important factor in frictional drag reduction by microbubble ejection. Usually bubbles larger than a certain diameter (for example 1 mm) have no effect on frictional drag reduction. Three different methods were proposed and tested to generate smaller bubbles. Among them, a 2D convex (half body of an NACA 64-021 section) with ejection holes at the top was the best and most promising. The diameter of the bubbles became about one-third the size of the reference ejection on a flat plate. Moreover, the bubble size did not increase with increasing flow rate. This is a favorable characteristic for practical purposes. The skin friction force was measured directly with a miniature floating element transducer, and decreased drastically by microbubble ejection from the top of the 2D convex shape.     

Effect of microbubbles on the structure of turbulence in a turbulent boundary layer

The time-averaged velocity and turbulence intensity distributions were measured by a laser Doppler velocimeter in a turbulent boundary layer filled with microbubbles. The void fraction distribution was also measured using a fiber-optic probe. The velocity decreased in the region below 100 wall units with an increase in bubble density. This led to a decrease in the velocity gradient at the wall, which was consistent with a decrease in shearing stress on the wall. The turbulence intensity in the buffer layer increased at a low microbubble density, and then began to decrease with an increasing microbubble density. Based on the present measurements, the mechanism of turbulence reduction by microbubbles is discussed and a model is proposed. Received for publication on Dec. 3, 1999; accepted on April 18, 2000