FPSO内孤立波载荷实验观测及理论预报模型研究

利用大型密度分层水槽开展了下凹型内孤立波作用在FPSO上的载荷特性系列实验;并依据实验工况,考虑KdV、eKdV和MCC内孤立波理论的适用性条件,数值研究了FPSO内孤立波载荷成分构成;基于实验结果和载荷成分构成,建立了FPSO内孤立波载荷的理论预报模型.研究表明:FPSO内孤立波水平载荷由粘性力和Froude-Krylov力组成,而垂向载荷主要为垂向Froude-Krylov力;Froude-Krylov力可通过动压力沿FPSO浮体湿表面积分得到,粘性力则通过经实验回归的摩擦系数Cf、形状修正因数K乘以内孤立波诱导水质点切向速度沿FPSO浮体湿表面积分得到.系列实验结果得出:摩擦系数Cf和形状修正因数K与雷诺数Re、KC数和流体层深度比h1/h有关;摩擦系数与Re呈自然对数关系;而形状修正因数K与KC数呈幂函数关系.理论预报模型预报的水平载荷、垂向载荷结果均与系列实验和数值结果吻合较好,并且发现随着内孤立波振幅的增加,载荷幅值近乎线性增加,而且上层流体深度对水平力幅值有明显的影响.     

北美铁路降低轮轨接触应力新进展

介绍了北美铁路在降低轮轨接触应力和轮轨作用力方面的研究成果.     

黏土中圆形低真空隧道管片结构内力分布及其影响因素

针对盾构隧道管片结构在不同环境下的受力性能,建立基于修正惯用法的力学模型,推导出圆形低真空隧道管片结构内力的解析解;以武汉黏土作为模拟地层,分别采用修正剑桥模型和弹簧模型,模拟分析圆形低真空隧道结构的内力分布;在获得解析解和2种数值解的基础上,对比分析特定工况下3种方法得到的隧道管片结构内力分布,探讨真空力、弯曲刚度有效率、地基抗力系数、侧向土压力系数这4个关键参数的影响规律。结果表明:对于黏土中的圆形低真空隧道,顶部与底部的管片结构正弯矩较大,腰部则是轴力与负弯矩较大;真空力对管片结构的弯矩几乎没有影响,但对轴力影响非常显著,且随真空力的增大而增大;管片结构弯矩随弯曲刚度有效率的增大而增大,随地基抗力系数和侧向土压力系数增大而减小;管片结构轴力随地基抗力系数的增大而增大,随弯曲刚度有效率增大而减小;在隧道腰部附近,轴力随侧向土压力系数的增大而减小,但隧道底部和顶部附近则与之相反。对比3种方法,解析解与数值解具有较好的一致性,但求解结果偏于保守。     

接地面部分溶化条件下冰面轮胎摩擦力的研究

综合运用流体动力润滑理论的能量守恒定律，提出了接地面部分溶化条件下冰面上汽车轮胎的摩擦力或牵引力的理论计算模型。证明了正常工作条件下，接地面上冰产生溶化的可能。对不同制动和驱动条件下轮胎摩擦力进行了计算，取得了同试验数据吻合很好的预测结果。并同已有预测模型进行了比较，比较结果表明：本文依据严格的润滑理论所推导出的冰面轮胎牵引力模型比其它已有理论模型更接近试验结果。     

Tyre/road noise damping characteristics using nomographs and fundamental vibroacoustical relationships

Several studies have successfully developed laboratory and field measurement techniques to estimate tyre/road noise damping characteristics. However, laboratory–field noise correlations of pavement types in the form of nomographs is essential to cognize the pavements’ acoustical properties from a practical perspective. A toolkit that readily provides field tyre/road noise intensity of different pavement materials is needed. Thus, the main objective of this study was to develop nomographs with relationships for tyre/road noise versus pavement materials’ viscoelastic–vibroacoustical properties. Isothermal and isochronal nomographs of phase angle–tyre/road noise as toolkits were developed based upon well-established phase angle and noise intensities typical of mixtures, making the nomograph correlations very authentic, realistic, and novel along with benefit to predict tyre/road noise at any desired temperature and traffic speed (or frequency) combination. This study is envisaged to benefit in the discernment of road materials’ damping capabilities from vibroacoustical and field noise–viscoelastic relation aspects.     

Design of tyre force excitation for tyre–road friction estimation

Knowledge of the current tyre–road friction coefficient is essential for future autonomous vehicles. The environmental conditions, and the tyre–road friction in particular, determine both the braking distance and the maximum cornering velocity and thus set the boundaries for the vehicle. Tyre–road friction is difficult to estimate during normal driving due to low levels of tyre force excitation. This problem can be solved by using active tyre force excitation. A torque is added to one or several wheels in the purpose of estimating the tyre–road friction coefficient. Active tyre force excitation provides the opportunity to design the tyre force excitation freely. This study investigates how the tyre force should be applied to minimise the error of the tyre–road friction estimate. The performance of different excitation strategies was found to be dependent on both tyre model choice and noise level. Furthermore, the advantage with using tyre models with more parameters decreased when noise was added to the force and slip ratio.     

中型载货汽车轮胎异常磨损的原因分析及解决措施

中型载货汽车轮胎常发生异常磨损现象，磨损形式是横向花纹轮胎呈锯齿状磨损，从胎冠上方向下看，胎肩处花纹块呈前高后低状，也有少部分呈前低后高状，形状似锯齿；纵向花纹轮胎一侧胎肩磨损明显大于另一侧。分析了此现象产生的原因，并提出了相应的解决措施。     

轮胎在沙地上牵引特性的新预测模型

本文分析了汽车在松软地面上行驶时轮台的受力状态及轮胎单元与土壤的相互作用方式，揭示了轮胎在松软地面上牵引特性传充预测模型的不足之处，建立了轮胎在沙地上牵引特性的新预测模型，并进行了实验验证。结果表明，采用本文所建立的模型进行预测时，预测值与实测值更接近。     

轮胎垂直振动动力学模型

本文提出一种自适应轮膜模型参数的简易测定方法，给出轮胎垂直振动动力学方程及相应的求解方法，并进行计算分析与试验测定。将分析结果与通常的点接触式模型相比较，对点接触式模型及本文所建立的自适应模型做了综合评价，结果表明，本模型的计算结果是令人满意的。     

3D brush model to predict longitudinal tyre characteristics

A 3D tyre brush model, which aims to predict the longitudinal tyre characteristic under steady-state conditions by modelling the occurring physical effects in the tyre–road contact patch, is presented. The model includes an analytical method to describe the tyre footprint geometry, the pressure distribution, the slip due to the lateral tyre contour, the slip due to braking or traction and the longitudinal as well as the lateral shear stresses on a flattened tyre. The presented development tool offers a method to investigate different rubber friction data (caused by different tread compounds and/or surface textures) and to analyse its influence on longitudinal tyre characteristics. The tyre design is fixed (same casing, dimension and pattern). The results include the shear stresses as well as the different sliding velocities in the contact patch for different slip conditions. The model was developed for a standard summer pattern design and a standard tyre dimension (205/55R16). It can also be adapted to other tread designs and tyre dimensions. To offer a good comparability between model results and test bench measurements, the surface curvature of an internal test rig is considered.